Dear Till, I tried to do what U asked.
I got the following (In gray. See the errors at the end): But after: a. Switching the printer power off. b. Taking the USB cable out of the computer: c. Switching the printer power on. d. Inserting the USB cable back into the computer It started to work. It seems that it works OK. Thanks very much to all you people who helped me so quickly and prepositionally. Shuki r...@roth-desktop:/home/amelia# sudo hp-plugin -i HP Linux Imaging and Printing System (ver. 3.10.2) Plugin Download and Install Utility ver. 2.1 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. (Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.) / ----------------------------------------- | PLUG-IN INSTALLATION FOR HPLIP 3.10.2 | ----------------------------------------- The driver plugin for HPLIP 3.10.2 appears to already be installed. Do you wish to download and re-install the plug-in? (y=yes*, n=no, q=quit) ? y Option Description ---------- -------------------------------------------------- d Download plug-in from HP (recomended) p Specify a path to the plug-in (advanced) q Quit hp-plugin (skip installation) Enter option (d=download*, p=specify path, q=quit) ? d -------------------------- | DOWNLOAD CONFIGURATION | -------------------------- Checking for network connection... Downloading configuration file from: http://hplip.sf.net/plugin.conf Downloading configuration: [*****************************] 100% 8.0 KB ------------------- | DOWNLOAD PLUGIN | ------------------- Checking for network connection... Downloading plug-in from: http://www.linuxprinting.org/download/printdriver/auxfiles/HP/plugins/hplip-3.10.2-plugin.run Downloading plug-in: [***********************************] 100% 8.0 KB Receiving digital keys: /usr/bin/gpg --no-permission-warning --keyserver pgp.mit.edu --recv-keys 0xA59047B9 ---------------------- | INSTALLING PLUG-IN | ---------------------- Verifying archive integrity... All good. Uncompressing HPLIP 3.10.2 Plugin Self Extracting Archive................................... HP Linux Imaging and Printing System (ver. 3.10.2) Plugin Installer ver. 3.0 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Plug-in version: 3.10.2 Installed HPLIP version: 3.10.2 Number of files to install: 30 You must agree to the license terms before installing the plug-in: LICENSE TERMS FOR HP Linux Imaging and Printing (HPLIP) Driver Plug-in These License Terms govern your Use of the HPLIP Driver Plug-in Software (the "Software"). USE OF THE SOFTWARE INCLUDING, WITHOUT LIMITATION, ANY DOCUMENTATION, IS SUBJECT TO THESE LICENSE TERMS AND THE APPLICABLE AS- IS WARRANTY STATEMENT. BY DOWNLOADING AND INSTALLING THE SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THESE TERMS. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, DO NOT DOWNLOAD AND INSTALL THE SOFTWARE ON YOUR SYSTEM. 1. License Grant. HP grants you a license to Use one copy of the Software with HP printing products only. "Use" includes using, storing, loading, installing, executing, and displaying the Software. You may not modify the Software or disable any licensing or control features of the Software. 2. Ownership. The Software is owned and copyrighted by HP or its third party suppliers. Your license confers no title to, or ownership in, the Software and is not a sale of any rights in the Software. HP's third party suppliers may protect their rights in the Software in the event of any violation of these license terms. 3. Copies and Adaptations. You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software. You must reproduce all copyright notices in the original Software on all copies or adaptations. You may not copy the Software onto any public network. 4. No Disassembly. You may not Disassemble the Software unless HP's prior written consent is obtained. "Disassemble" includes disassembling, decompiling, decrypting, and reverse engineering. In some jurisdictions, HP's consent may not be required for limited Disassembly. Upon request, you will provide HP with reasonably detailed information regarding any Disassembly. 5. No Transfer. You may not assign, sublicense or otherwise transfer all or any part of these License Terms or the Software. 6. Termination. HP may terminate your license, upon notice, for failure to comply with any of these License Terms. Upon termination, you must immediately destroy the Software, together with all copies, adaptations and merged portions in any form. 7. Export Requirements. You may not export or re-export the Software or any copy or adaptation in violation of any applicable laws or regulations. 8. U.S. Government Restricted Rights. The Software has been developed entirely at private expense. It is delivered and licensed, as defined in any applicable DFARS, FARS, or other equivalent federal agency regulation or contract clause, as either "commercial computer software" or "restricted computer software", whichever is applicable. You have only those rights provided for such Software by the applicable clause or regulation or by these License Terms. 9. DISCLAIMER OF WARRANTIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HP AND ITS SUPPLIERS PROVIDE THE SOFTWARE "AS IS" AND WITH ALL FAULTS, AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE AND NON-INFRINGEMENT, ANY IMPLIED WARRANTIES, DUTIES OR CONDITIONS OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE, AND OF LACK OF VIRUSES ALL WITH REGARD TO THE SOFTWARE. Some states/jurisdictions do not allow exclusion of implied warranties or limitations on the duration of implied warranties, so the above disclaimer may not apply to you in its entirety. 10. LIMITATION OF LIABILITY. Notwithstanding any damages that you might incur, the entire liability of HP and any of its suppliers under any provision of this agreement and your exclusive remedy for all of the foregoing shall be limited to the greater of the amount actually paid by you separately for the Software or U.S. $5.00. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HP OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IF HP OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. Some states/jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Do you accept the license terms for the plug-in (y=yes*, n=no, q=quit) ? Done. ------------------------ | DOWNLOADING FIRMWARE | ------------------------ Downloading firmware to device hp:/usb/HP_LaserJet_P1005?serial=BC1PRWZ... error: Device busy: hp:/usb/HP_LaserJet_P1005?serial=BC1PRWZ error: unable to open channel error: Device busy: hp:/usb/HP_LaserJet_P1005?serial=BC1PRWZ error: unable to open channel error: Channel write error error: An error occured: Device I/O error Done. r...@roth-desktop:/home/amelia# On Tue, Apr 27, 2010 at 7:45 AM, Till Kamppeter <[email protected]>wrote: > Please run > > sudo hp-plugin -i > > in a terminal window and follow the instructions on the screen. After > having done this, the printer's firmware is downloaded and will get > automatically loaded into the printer every time when it is turned on. > Then the printer should be able to print. > > >From Lucid on it is taken care of this automatically. > > ** Changed in: hplip (Ubuntu) > Status: New => Incomplete > > -- > Printer does not work > https://bugs.launchpad.net/bugs/562071 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “hplip” package in Ubuntu: Incomplete > > Bug description: > Binary package hint: yelp > > I use Ubuntu 9.10 > Packages: HPLIP 3.9.8-1ubuntu2, CUPS 3.9.8-1ubuntu2 > > I bought an HP_Laserjet_P1005 usb printer. > I installed it as was explained in some site. > I expected the printer to print. > What happened was that at first it did print but then it changed behavior > to the following: > When I boot the machine it comes with the following error: HPLIP Device > Status HP_Laserjet_P1005 Printer (BC1PRWZ) Device communication error (5012) > and the device is stopped in HP Device manager (see attached pic > rothfarb.2010Apr13.8-41.1.png) > When I tried to enter CUPS from HP Device manager i got an error: Unable to > open device hp:/usb/HP_Laserjet_P1005?serial=BCPRWZ (see attached pic > rothfarb.2010Apr13.8-43.2.png). > The print queue is left with one old print jobs in status processing and > the others in status pending. > I tried to reactivate the printer but it came with the same error. > I tried to stop/start the printer and disconnect/connect the usb plug. It > did not change. > > Thank you > Joshua Rothfarb > > ProblemType: Bug > Architecture: i386 > Date: Tue Apr 13 09:36:57 2010 > DistroRelease: Ubuntu 9.10 > ExecutablePath: /usr/bin/yelp > InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) > Package: yelp 2.28.0-0ubuntu2 > ProcEnviron: > LANG=en_US.UTF-8 > SHELL=/bin/bash > ProcVersionSignature: Ubuntu 2.6.31-20.58-generic > SourcePackage: yelp > Uname: Linux 2.6.31-20-generic i686 > XsessionErrors: > (gnome-settings-daemon:1880): GLib-CRITICAL **: g_propagate_error: > assertion `src != NULL' failed > (nautilus:1936): Eel-CRITICAL **: eel_preferences_get_boolean: assertion > `preferences_is_initialized ()' failed > (polkit-gnome-authentication-agent-1:1957): GLib-CRITICAL **: > g_once_init_leave: assertion `initialization_value != 0' failed > (firefox:2603): GLib-WARNING **: g_set_prgname() called multiple times > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/562071/+subscribe > -- Printer does not work https://bugs.launchpad.net/bugs/562071 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
