If it was fixed in 0.12.8-0ubuntu2 it's now regressed in 0.12.8-0ubuntu3
on my fresh Lucid upgrade.

lsof snippet:
gvfs-gpho 6062      floid   13u      CHR            189,146      0t0    2544556 
/dev/bus/usb/002/019
...
rhythmbox 6244      floid   43u      CHR            189,146      0t0    2544556 
/dev/bus/usb/002/019

Rhythmbox gets hung up sleeping (Sl state) as soon as the camera is
connected / if it is run with the camera connected.

This causes the ever-complained-of "Error mounting location: Error
initializing camera: -60: Could not lock the device" from gphoto2 and
its consumers.  At some point I got a -1 error out of it as well.

Of course it's an unexpected race depending whether
gphoto2/F-Spot/similar is run before Rhythmbox or not.  But with
Rhythmbox closed, the device actually works as a PTP camera in F-Spot,
much to my relief, and it even gvfs mounts (so turns out I'm not
affected by another bug I thought I was).

Observed with a Kodak Easyshare Z1485 IS:

Bus 002 Device 019: ID 040a:05c8 Kodak Co. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x040a Kodak Co.
  idProduct          0x05c8 
  bcdDevice            1.00
  iManufacturer           1 Eastman Kodak Company
  iProduct                2 KODAK EASYSHARE Z1485 IS Digital Camera
  iSerial                 3 KCXKF92400305
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         6 Imaging
      bInterfaceSubClass      1 Still Image Capture
      bInterfaceProtocol      1 Picture Transfer Protocol (PIMA 15470)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              16
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

-- 
the rhythmbox mtp code hijacks cameras
https://bugs.launchpad.net/bugs/544994
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to