Thank you. I will try this, unfortunately I dropped my laptop and it will require some soldering first.
On Mon, May 17, 2010 at 9:51 AM, Jeremy Foshee <[email protected]>wrote: > Hi weston, > > If you could also please test the latest upstream kernel available that > would be great. It will allow additional upstream developers to examine the > issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once > you've tested the upstream kernel, please remove the > 'needs-upstream-testing' tag. This can be done by clicking on the yellow > pencil icon next to the tag located at the bottom of the bug description and > deleting the 'needs-upstream-testing' text. Please let us know your > results. > > Thanks in advance. > > [This is an automated message. Apologies if it has reached you > inappropriately; please just reply to this message indicating so.] > > > ** Tags added: needs-upstream-testing > > ** Tags added: kj-triage > > ** Changed in: linux (Ubuntu) > Status: New => Incomplete > > -- > USB Mass Storage Mobile Phone Fails to Mount > https://bugs.launchpad.net/bugs/576777 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” package in Ubuntu: Incomplete > > Bug description: > My phone is a Kyocera Tempo. The last time I know this worked was in > K/Ubuntu 7. I assumed I was doing something wrong, but finally decided to do > some digging. lsusb reports the phone is connected: > > Bus 002 Device 011: ID 0c88:1000 Kyocera Wireless Corp. > > dmesg gives an error consistently (see below). Phone and cable work fine in > MS Windows (but what fun is that!) This is my first bug report, so please > let me know if there is something I should be doing differently. (I'd like > be as helpful as possible.) > > Thanks in advance! > > [ 1644.485340] Buffer I/O error on device sdb, logical block 64 > [ 1644.485353] Buffer I/O error on device sdb, logical block 65 > [ 1644.640106] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1644.980115] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1645.320064] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1645.690086] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1646.030101] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1646.370108] usb 2-2: reset full speed USB device using ohci_hcd and > address 13 > [ 1646.555263] sd 11:0:0:0: [sdb] Result: hostbyte=DID_ERROR > driverbyte=DRIVER_SENSE > [ 1646.555279] sd 11:0:0:0: [sdb] Sense Key : Illegal Request [current] > [ 1646.555291] sd 11:0:0:0: [sdb] Add. Sense: Invalid field in cdb > [ 1646.555305] sd 11:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 40 00 00 08 > 00 > [ 1646.555326] end_request: I/O error, dev sdb, sector 64 > [ 1647.612002] usb 2-2: USB disconnect, address 13 > [ 1647.612335] sd 11:0:0:0: [sdb] Unhandled error code > [ 1647.612341] sd 11:0:0:0: [sdb] Result: hostbyte=DID_ERROR > driverbyte=DRIVER_OK > [ 1647.612351] sd 11:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 40 00 00 08 > 00 > [ 1647.612374] end_request: I/O error, dev sdb, sector 64 > [ 1647.612385] __ratelimit: 14 callbacks suppressed > [ 1647.612393] Buffer I/O error on device sdb, logical block 64 > [ 1647.612404] Buffer I/O error on device sdb, logical block 65 > [ 1647.612411] Buffer I/O error on device sdb, logical block 66 > [ 1647.612419] Buffer I/O error on device sdb, logical block 67 > [ 1647.612426] Buffer I/O error on device sdb, logical block 68 > [ 1647.612433] Buffer I/O error on device sdb, logical block 69 > [ 1647.612440] Buffer I/O error on device sdb, logical block 70 > [ 1647.612448] Buffer I/O error on device sdb, logical block 71 > [ 1649.200080] usb 2-2: new full speed USB device using ohci_hcd and > address 14 > [ 1649.392596] usb 2-2: configuration #1 chosen from 1 choice > [ 1654.353567] usb 2-2: USB disconnect, address 14 > [ 1655.940094] usb 2-2: new full speed USB device using ohci_hcd and > address 15 > [ 1656.131488] usb 2-2: configuration #1 chosen from 1 choice > [ 1656.133662] scsi12 : SCSI emulation for USB Mass Storage devices > [ 1656.134078] usb-storage: device found at 15 > [ 1656.134084] usb-storage: waiting for device to settle before scanning > [ 1661.133232] usb-storage: device scan complete > [ 1661.139195] scsi 12:0:0:0: Direct-Access Qualcomm MMC Storage > 2.31 PQ: 0 ANSI: 2 > [ 1661.140360] sd 12:0:0:0: Attached scsi generic sg2 type 0 > [ 1661.290073] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1661.485223] sd 12:0:0:0: [sdb] 3987457 512-byte logical blocks: (2.04 > GB/1.90 GiB) > [ 1661.495202] sd 12:0:0:0: [sdb] Write Protect is off > [ 1661.495212] sd 12:0:0:0: [sdb] Mode Sense: 03 00 00 00 > [ 1661.495219] sd 12:0:0:0: [sdb] Assuming drive cache: write through > [ 1661.523227] sd 12:0:0:0: [sdb] Assuming drive cache: write through > [ 1661.523242] sdb: sdb1 > [ 1661.560235] sd 12:0:0:0: [sdb] Assuming drive cache: write through > [ 1661.560250] sd 12:0:0:0: [sdb] Attached SCSI removable disk > [ 1661.780083] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1662.120061] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1662.450084] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1662.665225] sd 12:0:0:0: [sdb] Unhandled sense code > [ 1662.665236] sd 12:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 1662.665248] sd 12:0:0:0: [sdb] Sense Key : Medium Error [current] > [ 1662.665260] sd 12:0:0:0: [sdb] Add. Sense: Recorded entity not found > [ 1662.665272] sd 12:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c d8 00 00 00 01 > 00 > [ 1662.665295] end_request: I/O error, dev sdb, sector 3987456 > [ 1662.665308] Buffer I/O error on device sdb, logical block 3987456 > [ 1662.820075] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1663.160082] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1663.500078] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1663.685225] sd 12:0:0:0: [sdb] Unhandled sense code > [ 1663.685236] sd 12:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 1663.685248] sd 12:0:0:0: [sdb] Sense Key : Medium Error [current] > [ 1663.685260] sd 12:0:0:0: [sdb] Add. Sense: Recorded entity not found > [ 1663.685273] sd 12:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c d8 00 00 00 01 > 00 > [ 1663.685295] end_request: I/O error, dev sdb, sector 3987456 > [ 1663.685308] Buffer I/O error on device sdb, logical block 3987456 > [ 1663.840071] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1664.180114] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1664.520112] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1664.860099] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1665.200099] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1665.540128] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1665.725233] sd 12:0:0:0: [sdb] Result: hostbyte=DID_ERROR > driverbyte=DRIVER_SENSE > [ 1665.725250] sd 12:0:0:0: [sdb] Sense Key : Illegal Request [current] > [ 1665.725262] sd 12:0:0:0: [sdb] Add. Sense: Invalid field in cdb > [ 1665.725277] sd 12:0:0:0: [sdb] CDB: Read(10): 28 00 00 3c d7 f8 00 00 01 > 00 > [ 1665.725299] end_request: I/O error, dev sdb, sector 3987448 > [ 1665.725312] Buffer I/O error on device sdb, logical block 3987448 > [ 1665.725323] Buffer I/O error on device sdb, logical block 3987449 > [ 1665.725331] Buffer I/O error on device sdb, logical block 3987450 > [ 1665.725339] Buffer I/O error on device sdb, logical block 3987451 > [ 1665.725348] Buffer I/O error on device sdb, logical block 3987452 > [ 1665.725357] Buffer I/O error on device sdb, logical block 3987453 > [ 1665.725365] Buffer I/O error on device sdb, logical block 3987454 > [ 1665.725373] Buffer I/O error on device sdb, logical block 3987455 > [ 1665.880098] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1666.220100] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > [ 1666.590065] usb 2-2: reset full speed USB device using ohci_hcd and > address 15 > > ProblemType: Bug > DistroRelease: Ubuntu 10.04 > Package: konqueror 4:4.4.2-0ubuntu2 > ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2 > Uname: Linux 2.6.32-22-generic x86_64 > NonfreeKernelModules: fglrx > Architecture: amd64 > Date: Thu May 6 22:42:47 2010 > InstallationMedia: Kubuntu 10.04 LTS "Lucid Lynx" - Release amd64 > (20100427) > ProcEnviron: > LANGUAGE= > LANG=en_US.UTF-8 > SHELL=/bin/bash > SourcePackage: kdebase > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/576777/+subscribe > -- USB Mass Storage Mobile Phone Fails to Mount https://bugs.launchpad.net/bugs/576777 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
