ericbuntu, does "cat /proc/interrupts" show ohci1394?
I wonder why no messages from ohci1394 and ieee1394 are present in your dmesg --- there should at least some from when the ohci1394 driver was loaded. According to the lspci output, the kernel has all information available that is required to detect that ohci1394 is to be bound to the FW323 chip. Did you cut too much out of the dmesg? (If you don't want to reboot to get a fresh new dmesg buffer, you can also run "modprobe -r dv1394 ohci1394; modprobe ohci1394" as root or with sudo and check whether anything new appears in dmesg at that time. If /yes/, then plug in/ switch on the camcorder and check dmesg again. Also run "grep . /sys/bus/ieee1394/devices/*/*". Post the outputs of dmesg and of the grep command here (as attachments if they are large). -- Cant use firewire for DV capture https://bugs.launchpad.net/bugs/320898 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
