Public bug reported:
Hi,
I just upgraded to feisty. After overcoming the shock of my hda having
disappeared and now being sda, I have the following issue:
UDMA 33 is used, although UDMA 100 is supported.
Here the hdparm output:
[EMAIL PROTECTED]:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: TOSHIBA MK1031GAS
Serial Number: 65AQ0125S
Firmware Revision: AA204C
Standards:
Supported: 6 5 4
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 195371568
device size with M = 1024*1024: 95396 MBytes
device size with M = 1000*1000: 100030 MBytes (100 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0080)
DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* IDLE_IMMEDIATE with UNLOAD
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
92min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct
and here a dmesg excerpt:
[ 4.572000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 4.572000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 19
[ 4.572000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.572000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x00011810 irq 14
[ 4.572000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x00011818 irq 15
[ 4.572000] scsi0 : ata_piix
[ 4.736000] ata1.00: ATA-6: TOSHIBA MK1031GAS, AA204C, max UDMA/100
[ 4.736000] ata1.00: 195371568 sectors, multi 16: LBA
[ 4.900000] ata1.01: ATAPI, max MWDMA2
[ 4.908000] ata1.00: configured for UDMA/33
[ 5.072000] ata1.01: configured for MWDMA2
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
UDMA 33 instead of UDMA 100 used
https://launchpad.net/bugs/95921
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
