Same problem. This scanner worked fine in Karmic. (HP Photosmart C8180)
I also typed this.
r...@mo-station:~# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0 [HP], product=0x6411 [Photosmart C8100
series]) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
moni...@mo-station:~$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
moni...@mo-station:~$ simple-scan
** (simple-scan:1523): WARNING **: No scan device available
moni...@mo-station:~$ simple-scan -d
** (simple-scan:1537): DEBUG: Starting Simple Scan 1.0.3, PID=1537
** (simple-scan:1537): DEBUG: Restoring window to 600x400 pixels
** (simple-scan:1537): DEBUG: sane_init () -> SANE_STATUS_GOOD
** (simple-scan:1537): DEBUG: SANE version 1.0.20
** (simple-scan:1537): DEBUG: Requesting redetection of scan devices
** (simple-scan:1537): DEBUG: Processing request
** (simple-scan:1537): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD
** (simple-scan:1537): DEBUG: Requesting scan at 300 dpi from device '(null)'
** (simple-scan:1537): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE)
** (simple-scan:1537): DEBUG: Processing request
** (simple-scan:1537): WARNING **: No scan device available
** (simple-scan:1537): DEBUG: Stopping scan thread
** (simple-scan:1537): DEBUG: Processing request
** (simple-scan:1537): DEBUG: sane_exit ()
lsusb displays this.
Bus 001 Device 003: ID 03f0:6411 Hewlett-Packard PhotoSmart C8100 series
--
Ubuntu Lucid Lynx---> simple scan cannot handle scanning with canon mp250
multifunction printer.
https://bugs.launchpad.net/bugs/573709
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
