On Mon, 2007-03-26 at 17:00 +0000, Tim Gardner wrote:
> Please attach (do not inline) the output of these commands:
>
> lspci -vv > lspci.txt
> sudo dmidecode > dmidecode.txt
> dmesg > dmesg.txt
>
> Can you confirm that 'acpi=off' did not correct the problem?
>
> ** Changed in: linux-source-2.6.20 (Ubuntu)
> Assignee: (unassigned) => Tim Gardner
> Status: Unconfirmed => Needs Info
>
Tim,
Files are attached. You will note I installed the latest alsa drivers,
and am running with acpi=ht (never tried 'off') and all save fully
functional acpi seems working.
Dave
--
Dave Loutrel <[EMAIL PROTECTED]>
[ 0.000000] Linux version 2.6.20-12-generic ([EMAIL PROTECTED]) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu
2.6.20-12.20-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800
end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800
end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000
end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f590000
end: 000000003f690000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f690000 size: 0000000000070000
end: 000000003f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000
end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000
end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000
end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400
end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000
end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000
end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000
end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000
end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f65d0
[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259728
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259728
[ 0.000000] On node 0 totalpages: 259728
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 LENOVO ) @
0x000f6540
[ 0.000000] ACPI: XSDT (v001 PTLTD XSDT 0x00000034 LTP 0x00000000) @
0x3f693c0b
[ 0.000000] ACPI: FADT (v003 INTEL CALISTGA 0x00000034 ALAN 0x00000001) @
0x3f699d6e
[ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x00000034 LOHR 0x0000005a) @
0x3f699e62
[ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x00000034 LOHR 0x0000005a) @
0x3f699eca
[ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x00000034 LOHR 0x0000005a) @
0x3f699f02
[ 0.000000] ACPI: TCPA (v001 Phoeni x 0x00000034 TL 0x00000000) @
0x3f699f3e
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x00000034 LTP 0x00000000) @
0x3f699f70
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x00000034 LTP 0x00000001) @
0x3f699fd8
[ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @
0x3f695359
[ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @
0x3f694cc7
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @
0x3f69423d
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @
0x3f694197
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @
0x3f693c8f
[ 0.000000] ACPI: DSDT (v001 LENOVO TP-61 0x00000034 INTL 0x20050624) @
0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Detected 1662.524 MHz processor.
[ 15.883074] Built 1 zonelists. Total pages: 257699
[ 15.883080] Kernel command line:
root=UUID=83f26c56-d4e2-45fb-93b1-ab6787747f6e ro quiet splash acpi=ht
[ 15.883330] mapped APIC to ffffd000 (fee00000)
[ 15.883334] mapped IOAPIC to ffffc000 (fec00000)
[ 15.883338] Enabling fast FPU save and restore... done.
[ 15.883342] Enabling unmasked SIMD FPU exception support... done.
[ 15.883351] Initializing CPU#0
[ 15.883438] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 15.885090] Console: colour VGA+ 80x25
[ 15.885409] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.885831] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.923837] Memory: 1018740k/1038912k available (1990k kernel code, 19396k
reserved, 890k data, 328k init, 121408k highmem)
[ 15.923851] virtual kernel memory layout:
[ 15.923853] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 15.923855] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.923857] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.923858] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.923860] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 15.923862] .data : 0xc02f1b04 - 0xc03d06d4 ( 890 kB)
[ 15.923864] .text : 0xc0100000 - 0xc02f1b04 (1990 kB)
[ 15.923869] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 15.924087] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.924096] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.925103] Using HPET for base-timer
[ 16.003969] Calibrating delay using timer specific routine.. 3329.52
BogoMIPS (lpj=6659052)
[ 16.004026] Security Framework v1.0.0 initialized
[ 16.004032] SELinux: Disabled at boot.
[ 16.004054] Mount-cache hash table entries: 512
[ 16.004231] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001
[ 16.004243] monitor/mwait feature present.
[ 16.004246] using mwait in idle threads.
[ 16.004252] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.004255] CPU: L2 cache: 2048K
[ 16.004259] CPU: Physical Processor ID: 0
[ 16.004262] CPU: Processor Core ID: 0
[ 16.004264] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940
0000e39d 00000000 00000001
[ 16.004277] Compat vDSO mapped to ffffe000.
[ 16.004283] Remapping vsyscall page to ffffe000
[ 16.004300] Checking 'hlt' instruction... OK.
[ 16.020083] SMP alternatives: switching to UP code
[ 16.020573] Early unpacking initramfs... done
[ 16.542999] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 16.543026] SMP alternatives: switching to SMP code
[ 16.543116] Booting processor 1/1 eip 3000
[ 16.553680] Initializing CPU#1
[ 16.631011] Calibrating delay using timer specific routine.. 3325.16
BogoMIPS (lpj=6650324)
[ 16.631021] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001
[ 16.631029] monitor/mwait feature present.
[ 16.631033] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.631036] CPU: L2 cache: 2048K
[ 16.631040] CPU: Physical Processor ID: 0
[ 16.631042] CPU: Processor Core ID: 1
[ 16.631044] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940
0000e39d 00000000 00000001
[ 16.631811] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 16.631845] Total of 2 processors activated (6654.68 BogoMIPS).
[ 16.631942] ExtINT not setup in hardware but reported by MP table
[ 16.632055] ENABLING IO-APIC IRQs
[ 16.632298] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 16.778785] checking TSC synchronization across 2 CPUs: passed.
[ 0.003996] Brought up 2 CPUs
[ 0.135903] migration_cost=40
[ 0.136312] Booting paravirtualized kernel on bare hardware
[ 0.136434] Time: 16:38:42 Date: 02/25/107
[ 0.136475] NET: Registered protocol family 16
[ 0.136593] EISA bus registered
[ 0.136738] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=5
[ 0.136741] PCI: Using configuration type 1
[ 0.136744] Setting up standard PCI resources
[ 0.140564] ACPI: Interpreter disabled.
[ 0.140569] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.140581] pnp: PnP ACPI: disabled
[ 0.140586] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.140596] PnPBIOS: Found PnP BIOS installation structure at 0xc00f65f0
[ 0.140601] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb62e, dseg 0x400
[ 0.142904] PnPBIOS: 25 nodes reported by PnP BIOS; 25 recorded by driver
[ 0.142972] PCI: Probing PCI hardware
[ 0.142979] PCI: Probing PCI hardware (bus 00)
[ 0.143136] Boot video device is 0000:00:02.0
[ 0.143953] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.143960] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.145363] PCI: Transparent bridge - 0000:00:1e.0
[ 0.145462] PCI: Bus #06 (-#09) is hidden behind transparent bridge #05
(-#05) (try 'pci=assign-busses')
[ 0.145467] Please report the result to linux-kernel to fix this permanently
[ 0.147150] PCI: Discovered primary peer bus 01 [IRQ]
[ 0.147161] PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0
[ 0.147175] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
[ 0.147182] PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 22
[ 0.147187] PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 17
[ 0.147193] PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 16
[ 0.147198] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
[ 0.147204] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[ 0.147210] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[ 0.147216] PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
[ 0.147222] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
[ 0.147232] PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
[ 0.147238] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
[ 0.147288] PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 17
[ 0.147294] PCI->APIC IRQ transform: 0000:05:01.0[A] -> IRQ 21
[ 0.147303] PCI->APIC IRQ transform: 0000:05:06.0[A] -> IRQ 22
[ 0.147309] PCI->APIC IRQ transform: 0000:05:06.1[B] -> IRQ 23
[ 0.147314] PCI->APIC IRQ transform: 0000:05:06.2[B] -> IRQ 23
[ 0.147320] PCI->APIC IRQ transform: 0000:05:06.3[B] -> IRQ 23
[ 0.147326] PCI->APIC IRQ transform: 0000:05:06.4[B] -> IRQ 23
[ 0.173212] NET: Registered protocol family 8
[ 0.173217] NET: Registered protocol family 20
[ 0.173296] pnp: 00:0a: ioport range 0xfe00-0xfe01 has been reserved
[ 0.173313] pnp: 00:0e: ioport range 0x4d0-0x4d1 has been reserved
[ 0.173317] pnp: 00:0e: ioport range 0x1000-0x105f has been reserved
[ 0.173322] pnp: 00:0e: ioport range 0x1060-0x107f has been reserved
[ 0.173326] pnp: 00:0e: ioport range 0x1180-0x11bf has been reserved
[ 0.173819] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.173826] PCI: Bridge: 0000:00:1c.0
[ 0.173828] IO window: disabled.
[ 0.173836] MEM window: disabled.
[ 0.173842] PREFETCH window: disabled.
[ 0.173850] PCI: Bridge: 0000:00:1c.1
[ 0.173852] IO window: disabled.
[ 0.173860] MEM window: d0000000-d00fffff
[ 0.173867] PREFETCH window: disabled.
[ 0.173884] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[ 0.173887] IO window: 00002400-000024ff
[ 0.173894] IO window: 00002800-000028ff
[ 0.173902] PREFETCH window: 50000000-53ffffff
[ 0.173909] MEM window: 54000000-57ffffff
[ 0.173916] PCI: Bridge: 0000:00:1e.0
[ 0.173921] IO window: 2000-2fff
[ 0.173929] MEM window: d0100000-d01fffff
[ 0.173936] PREFETCH window: 50000000-53ffffff
[ 0.173979] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.174016] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.174032] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 0.174043] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.174068] PCI: No IRQ known for interrupt pin A of device 0000:05:04.0.
Probably buggy MP table.
[ 0.174107] NET: Registered protocol family 2
[ 0.223719] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.223858] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.224556] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.224895] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.224899] TCP reno registered
[ 0.239811] checking if image is initramfs... it is
[ 1.272592] Freeing initrd memory: 6745k freed
[ 1.272830] Simple Boot Flag at 0x36 set to 0x1
[ 1.273540] audit: initializing netlink socket (disabled)
[ 1.273561] audit(1174840723.208:1): initialized
[ 1.273706] highmem bounce pool size: 64 pages
[ 1.273838] VFS: Disk quotas dquot_6.5.1
[ 1.273866] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.273937] io scheduler noop registered
[ 1.273941] io scheduler anticipatory registered
[ 1.273944] io scheduler deadline registered
[ 1.273962] io scheduler cfq registered (default)
[ 9.265721] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 9.266069] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.266145] assign_interrupt_mode Found MSI capability
[ 9.266150] Allocate Port Service[0000:00:1c.0:pcie00]
[ 9.266202] Allocate Port Service[0000:00:1c.0:pcie02]
[ 9.266369] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 9.266444] assign_interrupt_mode Found MSI capability
[ 9.266447] Allocate Port Service[0000:00:1c.1:pcie00]
[ 9.266496] Allocate Port Service[0000:00:1c.1:pcie02]
[ 9.266732] isapnp: Scanning for PnP cards...
[ 9.620118] isapnp: No Plug & Play device found
[ 9.654027] Real Time Clock Driver v1.12ac
[ 9.654131] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 9.655155] mice: PS/2 mouse device common for all mice
[ 9.656031] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 9.656255] input: Macintosh mouse button emulation as /class/input/input0
[ 9.656313] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.656319] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 9.656700] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 9.680631] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.702127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.702133] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.702137] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.702141] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.702145] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.703949] EISA: Probing bus 0 at eisa.0
[ 9.703958] Cannot allocate resource for EISA slot 1
[ 9.703963] Cannot allocate resource for EISA slot 2
[ 9.703995] EISA: Detected 0 cards.
[ 9.734079] TCP cubic registered
[ 9.734092] NET: Registered protocol family 1
[ 9.734127] Starting balanced_irq
[ 9.734136] Using IPI No-Shortcut mode
[ 9.734177] Magic number: 15:138:642
[ 9.734469] Freeing unused kernel memory: 328k freed
[ 9.737162] Time: tsc clocksource has been installed.
[ 9.743240] input: AT Translated Set 2 keyboard as /class/input/input1
[ 11.066588] Capability LSM initialized
[ 11.171590] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 11.710572] usbcore: registered new interface driver usbfs
[ 11.710605] usbcore: registered new interface driver hub
[ 11.710641] usbcore: registered new device driver usb
[ 11.711873] USB Universal Host Controller Interface driver v3.0
[ 11.711942] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.711948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.712085] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 11.712121] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 11.712274] usb usb1: configuration #1 chosen from 1 choice
[ 11.712311] hub 1-0:1.0: USB hub found
[ 11.712320] hub 1-0:1.0: 2 ports detected
[ 11.818018] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.818026] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.818065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 11.818102] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 11.818231] usb usb2: configuration #1 chosen from 1 choice
[ 11.818268] hub 2-0:1.0: USB hub found
[ 11.818276] hub 2-0:1.0: 2 ports detected
[ 11.919983] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 11.925792] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.925800] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.925859] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 11.925895] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 11.926028] usb usb3: configuration #1 chosen from 1 choice
[ 11.926066] hub 3-0:1.0: USB hub found
[ 11.926078] hub 3-0:1.0: 2 ports detected
[ 11.949851] ieee1394: Initialized config rom entry `ip1394'
[ 12.033617] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 12.033624] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 12.033664] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 12.033702] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 12.033832] usb usb4: configuration #1 chosen from 1 choice
[ 12.033871] hub 4-0:1.0: USB hub found
[ 12.033879] hub 4-0:1.0: 2 ports detected
[ 12.057426] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 12.150143] SCSI subsystem initialized
[ 12.157591] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 12.157598] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 12.157639] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 12.157684] ehci_hcd 0000:00:1d.7: debug port 1
[ 12.157693] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 12.157701] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[ 12.161575] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 12.161700] usb usb5: configuration #1 chosen from 1 choice
[ 12.161744] hub 5-0:1.0: USB hub found
[ 12.161753] hub 5-0:1.0: 8 ports detected
[ 12.165534] libata version 2.20 loaded.
[ 12.269321] PCI: Enabling device 0000:05:06.0 (0000 -> 0002)
[ 12.269340] PCI: Setting latency timer of device 0000:05:06.0 to 64
[ 12.322282] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
MMIO=[d0100800-d0100fff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 12.329024] 8139cp 0000:05:01.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
[ 12.329029] 8139cp 0000:05:01.0: Try the "8139too" driver instead.
[ 12.329602] ata_piix 0000:00:1f.2: version 2.10ac1
[ 12.329612] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 12.331934] 8139too Fast Ethernet driver 0.9.28
[ 12.488808] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 12.488867] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x000118b0 irq 14
[ 12.488902] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x000118b8 irq 15
[ 12.488935] scsi0 : ata_piix
[ 12.592599] usb 1-2: device not accepting address 2, error -71
[ 12.660824] ata1.00: ATA-7: HTS541010G9SA00, MBZIC60R, max UDMA/100
[ 12.660829] ata1.00: 195371568 sectors, multi 16: LBA48
[ 12.672801] ata1.00: configured for UDMA/100
[ 12.672809] scsi1 : ata_piix
[ 12.996457] ata2.00: ATAPI, max UDMA/33
[ 13.164208] ata2.00: configured for UDMA/33
[ 13.164362] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZI
PQ: 0 ANSI: 5
[ 13.166283] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB31
PQ: 0 ANSI: 5
[ 13.166621] PCI: Setting latency timer of device 0000:05:01.0 to 64
[ 13.167285] eth0: RealTek RTL8139 at 0xf8898000, 00:0f:b0:cf:88:6b, IRQ 21
[ 13.167290] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 13.179737] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 13.179757] sda: Write Protect is off
[ 13.179760] sda: Mode Sense: 00 3a 00 00
[ 13.179785] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.179860] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 13.179875] sda: Write Protect is off
[ 13.179878] sda: Mode Sense: 00 3a 00 00
[ 13.179901] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.179906] sda: sda1 sda2 < sda5 >
[ 13.224132] sd 0:0:0:0: Attached scsi disk sda
[ 13.229904] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.229935] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 13.235531] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 13.235537] Uniform CD-ROM driver Revision: 3.20
[ 13.235752] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.391381] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 13.496666] Attempting manual resume
[ 13.496671] swsusp: Resume From Partition 8:5
[ 13.496674] PM: Checking swsusp image.
[ 13.496915] PM: Resume from disk failed.
[ 13.540814] kjournald starting. Commit interval 5 seconds
[ 13.540834] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.573421] usb 1-2: configuration #1 chosen from 1 choice
[ 13.603186] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f6c8f400149]
[ 13.818712] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 13.993889] usb 3-2: configuration #1 chosen from 1 choice
[ 25.674344] eth0: link down
[ 26.930470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.157556] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.174887] iTCO_vendor_support: vendor-support=0
[ 27.176207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 27.176310] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 27.176353] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 27.213581] Linux agpgart interface v0.101 (c) Dave Jones
[ 27.215627] agpgart: Detected an Intel 945GM Chipset.
[ 27.216490] agpgart: Detected 7932K stolen memory.
[ 27.234111] agpgart: AGP aperture is 256M @ 0xc0000000
[ 27.390511] intel_rng: FWH not detected
[ 27.612935] NET: Registered protocol family 17
[ 28.285462] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps:
0xa04753/0x200000
[ 28.359972] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 28.488355] Bluetooth: Core ver 2.11
[ 28.488437] NET: Registered protocol family 31
[ 28.488441] Bluetooth: HCI device and connection manager initialized
[ 28.488446] Bluetooth: HCI socket layer initialized
[ 28.501985] Bluetooth: HCI USB driver ver 2.9
[ 28.536729] input: PC Speaker as /class/input/input3
[ 28.595303] usbcore: registered new interface driver hci_usb
[ 28.612854] ieee80211_crypt: registered algorithm 'NULL'
[ 28.615558] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 28.615562] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL
PROTECTED]>
[ 28.705743] Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075]
[ 28.705772] Yenta: adjusting diagnostic: 60 -> 00
[ 28.705782] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 28.705785] Yenta: Routing CardBus interrupts to ISA
[ 28.705793] Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44
[ 28.705798] Yenta TI: socket 0000:05:04.0 no PCI interrupts. Fish. Please
report.
[ 28.705804] Yenta: no PCI IRQ, CardBus support disabled for this socket.
[ 28.705806] Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
[ 28.734339] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 28.734343] sdhci: Copyright(c) Pierre Ossman
[ 28.771952] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver
for Linux, 1.2.0mp
[ 28.771958] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 28.836504] Yenta: ISA IRQ mask 0x02d8, PCI irq 0
[ 28.836510] Socket status: 30000006
[ 28.836515] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to
#09
[ 28.836523] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 28.836528] cs: IO port probe 0x2000-0x2fff: clean.
[ 28.836954] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[ 28.836959] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 28.837237] sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev
19)
[ 28.837259] PCI: Enabling device 0000:05:06.1 (0000 -> 0002)
[ 28.837297] PCI: Setting latency timer of device 0000:05:06.1 to 64
[ 28.837302] sdhci:slot0: Controller reports > 25 MHz base clock, but no high
speed support.
[ 28.837373] mmc0: SDHCI at 0xd0100400 irq 23 DMA
[ 28.859515] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 28.859619] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 29.232176] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 29.289733] cs: IO port probe 0x100-0x3af: clean.
[ 29.291705] cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.292519] cs: IO port probe 0x820-0x8ff: clean.
[ 29.293186] cs: IO port probe 0xc00-0xcf7: clean.
[ 29.294023] cs: IO port probe 0xa00-0xaff: clean.
[ 30.181506] ALSA
/home/dave/alsa-driver-1.0.14rc3/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:245:
si3054: cannot initialize. EXT MID = 0000
[ 30.401866] lp: driver loaded but no devices found
[ 30.489140] fuse init (API version 7.8)
[ 30.532535] Adding 3004112k swap on
/dev/disk/by-uuid/19973dd5-8212-49de-a825-a335e0ca2fca. Priority:-1 extents:1
across:3004112k
[ 30.617015] EXT3 FS on sda1, internal journal
[ 30.796822] ipw3945: Detected geography ABG (11 802.11bg channels, 13
802.11a channels)
[ 31.156310] ieee80211_crypt: registered algorithm 'WEP'
[ 34.977739] NET: Registered protocol family 10
[ 34.977887] lo: Disabled Privacy Extensions
[ 34.977959] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.864703] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 35.864777] acpi_cpufreq: Unknown symbol
acpi_processor_unregister_performance
[ 35.864948] acpi_cpufreq: Unknown symbol
acpi_processor_preregister_performance
[ 35.865031] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 43.203540] ppdev: user-space parallel port driver
[ 44.250081] [drm] Initialized drm 1.1.0 20060810
[ 44.252825] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 46.357027] apm: BIOS not found.
[ 47.836425] Bluetooth: L2CAP ver 2.8
[ 47.836431] Bluetooth: L2CAP socket layer initialized
[ 48.078334] Bluetooth: RFCOMM socket layer initialized
[ 48.078467] Bluetooth: RFCOMM TTY layer initialized
[ 48.078471] Bluetooth: RFCOMM ver 1.8
[14375.653765] ipw3945: Error sending LEDS_CMD: time out after 500ms.
[25200.440668] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[25210.712954] eth1: no IPv6 routers present
# dmidecode 2.8
SMBIOS 2.4 present.
42 structures occupying 1436 bytes.
Table at 0x000DC010.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: LENOVO
Version: 61ET34WW
Release Date: 12/07/06
Address: 0xE6B50
Runtime Size: 103600 bytes
ROM Size: 1024 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
ACPI is supported
USB legacy is supported
AGP is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 0689A5U
Version: 3000 N100
Serial Number: L3BF490
UUID: C7F2C469-83A4-11DB-8939-000FB0CF886B
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: LENOVO
Product Name: CAPELL VALLEY(NAPA) CRB
Version: Not Applicable
Serial Number: 41W1219Z1ZBU96C794S
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: No Enclosure
Type: Notebook
Lock: Not Present
Version: N/A
Serial Number: None
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U2E1
Type: Central Processor
Family: Other
Manufacturer: Intel
ID: F6 06 00 00 FF FB EB BF
Version: Intel(R) Core(TM)2 CPU T5
Voltage: 3.3 V
External Clock: 166 MHz
Max Speed: 2048 MHz
Current Speed: 1660 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J19
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: COM 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Mouse Port
Handle 0x000A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J8B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Slot J9B1
Type: 32-bit PCI
Current Usage: Unknown
Length: Long
ID: 0
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PEG Slot J6C1
Type: 32-bit PCI Express
Current Usage: Available
Length: Long
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000D, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J7C1
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI Express Slot J8C1
Type: 32-bit PCI Express
Current Usage: Unknown
Length: Long
Characteristics:
5.0 V is provided
3.3 V is provided
Handle 0x000F, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: HD-Audio
Handle 0x0010, DMI type 11, 5 bytes
OEM Strings
String 1: This is the Intel Calistoga
String 2: Chipset CRB Platform
Handle 0x0011, DMI type 12, 5 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0012, DMI type 15, 29 bytes
System Event Log
Area Length: 16 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x00000003
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0013, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0014, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 512 MB
Form Factor: SODIMM
Set: 1
Locator: M1
Bank Locator: Bank 0
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0015, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0013
Error Information Handle: No Error
Total Width: 32 bits
Data Width: 32 bits
Size: 512 MB
Form Factor: SODIMM
Set: 1
Locator: M2
Bank Locator: Bank 1
Type: DDR2
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0016, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0013
Partition Width: 0
Handle 0x0017, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0014
Memory Array Mapped Address Handle: 0x0016
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0018, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0015
Memory Array Mapped Address Handle: 0x0016
Partition Row Position: Unknown
Interleave Position: Unknown
Interleaved Data Depth: Unknown
Handle 0x0019, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001A, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Unknown
Administrator Password Status: Disabled
Front Panel Reset Status: Unknown
Handle 0x001B, DMI type 25, 9 bytes
System Power Controls
Next Scheduled Power-on: 12-31 23:59:59
Handle 0x001C, DMI type 26, 20 bytes
Voltage Probe
Description: Voltage Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001D, DMI type 27, 12 bytes
Cooling Device
Temperature Probe Handle: 0x001E
Type: Fan
Status: OK
OEM-specific Information: 0x00000000
Handle 0x001E, DMI type 28, 20 bytes
Temperature Probe
Description: Temperature Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x001F, DMI type 29, 20 bytes
Electrical Current Probe
Description: Electrical Current Probe
Location: Processor
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Handle 0x0020, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: Intel
Inbound Connection: Enabled
Outbound Connection: Disabled
Handle 0x0021, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x0022, DMI type 129, 16 bytes
OEM-specific Type
Header and Data:
81 10 22 00 01 01 02 01 00 00 00 01 00 00 08 01
Strings:
Intel_ASF_001
Intel_ASF_001
Handle 0x0023, DMI type 136, 5 bytes
OEM-specific Type
Header and Data:
88 05 23 00 5A
Strings:
Z
Handle 0x0024, DMI type 131, 22 bytes
OEM-specific Type
Header and Data:
83 16 24 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 01
Strings:
TVT-Enablement
Handle 0x0025, DMI type 131, 22 bytes
OEM-specific Type
Header and Data:
83 16 25 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 01
Strings:
TVT-Enablement
Handle 0x0026, DMI type 133, 5 bytes
OEM-specific Type
Header and Data:
85 05 26 00 01
Strings:
KHOIHGIUCCHHII
Handle 0x0027, DMI type 135, 10 bytes
OEM-specific Type
Header and Data:
87 0A 27 00 50 54 07 03 01 05
Handle 0x0028, DMI type 150, 14 bytes
OEM-specific Type
Header and Data:
96 0E 28 00 01 01 00 00 00 00 00 00 00 00
Strings:
ABSOLUTE(PHOENIX) CLM
Handle 0x0029, DMI type 127, 4 bytes
End Of Table
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub (rev 03)
Subsystem: Lenovo Unknown device 2061
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Lenovo Unknown device 2062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at d0300000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express
Integrated Graphics Controller (rev 03)
Subsystem: Lenovo Unknown device 2062
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at d0280000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Lenovo Unknown device 2066
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 2, PowerLimit 6.500000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Unknown device 2067
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: d0000000-d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
Slot: Number 3, PowerLimit 6.500000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Lenovo Unknown device 2068
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 206b
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 206c
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 206d
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
02) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device 206e
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device 206f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0544000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Lenovo Unknown device 2070
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
Subsystem: Lenovo Unknown device 2071
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA
Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Lenovo Unknown device 2072
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18b0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
Subsystem: Lenovo Unknown device 2073
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18c0 [size=32]
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
Subsystem: Intel Corporation Unknown device 1010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Lenovo Unknown device 2074
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
Subsystem: Lenovo Unknown device 2075
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at d0102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 54000000-57fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
05:06.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10
[OHCI])
Subsystem: Lenovo Unknown device 2076
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d0100800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
05:06.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
Subsystem: Lenovo Unknown device 2077
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 23
Region 0: Memory at d0100400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
05:06.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
Subsystem: Lenovo Unknown device 2078
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at d0101000 (32-bit, non-prefetchable) [disabled]
[size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
05:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
(rev 0a)
Subsystem: Lenovo Unknown device 2079
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at d0101400 (32-bit, non-prefetchable) [disabled]
[size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
05:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
Subsystem: Lenovo Unknown device 207a
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at d0101800 (32-bit, non-prefetchable) [disabled]
[size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
--
acpi bug affects alsasound in Lenovo 3000
https://launchpad.net/bugs/96004
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
