Hi Fabio,
Sorry about the delay in my response.. i usually don't check my mail on
weekends
;-)
Coming to the issue, yes, I still have it on my system, even after upgrading it
to Lucid. I recently tried again to get my card working but without success. I
even got myself a new router (Belkin 54 g) in the hope that it will work.
I bought a wireless adapter (Linksys) to bypass this and that's how I access
the
internet.
Let me know if you want me to run any tests on my environment and I will be
happy to oblige.
Thank you for your interest in this
-Satish
________________________________
From: Fabio Marconi <marconifa...@hotmail.it>
To: spwanderer-k...@yahoo.com
Sent: Fri, 20 August, 2010 5:13:27 PM
Subject: [Bug 435244] Re: Davicom DM9102 doesn't work (Jaunty)
hello
Are you experiencing this problem with latest updated lucid's packages?
Thanks in advance
fabio
** Tags added: jaunty
** Package changed: ubuntu => linux (Ubuntu)
** Changed in: linux (Ubuntu)
Status: New => Incomplete
--
Davicom DM9102 doesn't work (Jaunty)
https://bugs.launchpad.net/bugs/435244
You received this bug notification because you are a direct subscriber
of the bug.
Status in “linux” package in Ubuntu: Incomplete
Bug description:
DM9102 doesn't work on Jaunty. I've tried solutions for Dapper, Hoary, and
Warty
I found on ubuntuforums.org. Apparently, it should work on Jaunty, but didn't.
I've tried loading tulip and dmfe with no luck. Also tried appending dmfe on
/etc/modules and blacklisting tulip, also no luck.
dmesg | grep eth
[ 2.090548] Driver 'sd' needs updating - please use bus_type methods
[ 2.090565] Driver 'sr' needs updating - please use bus_type methods
[ 3.685275] eth0: Davicom DM9102 at pci0000:00:0a.0, 00:80:ad:01:0e:68, irq
11.
[ 11.603829] udev: renamed network interface eth0 to eth1
[ 23.467472] ADDRCONF(NETDEV_UP): eth1: link is not ready
ifconfig -a
eth1 Link encap:Ethernet HWaddr 00:80:ad:01:0e:68
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:11 Base address:0xec00
<! TRIMMED >
To unsubscribe from this bug, go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/435244/+subscribe
--
Davicom DM9102 doesn't work (Jaunty)
https://bugs.launchpad.net/bugs/435244
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
