2007/3/28, Timo Aaltonen <[EMAIL PROTECTED]>:
>
> It just meant that the bug was assigned to xorg.
>
> Please attach (as files) your /etc/X11/xorg.conf, /var/log/Xorg.0.log
> and the output of 'sudo lspci -vvnn'. Also, what does 'sudo xresprobe
> i810' say?
>
> ** Changed in: xorg (Ubuntu)
> Status: Unconfirmed => Needs Info
>
> --
> can't display 82865G driver vesa monitor G150
> https://launchpad.net/bugs/96451
0000:00:00.0 0600: 8086:2570 (rev 02)
Subsystem: 1849:2570
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fe800000 (32-bit, prefetchable) [size=4M]
Capabilities: [e4] #09 [1106]
0000:00:02.0 0300: 8086:2572 (rev 02)
Subsystem: 1849:2572
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fe780000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at ec00 [size=8]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot -,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
Subsystem: 1849:24d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at dc00 [size=32]
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
Subsystem: 1849:24d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 185
Region 4: I/O ports at e000 [size=32]
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
Subsystem: 1849:24d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 169
Region 4: I/O ports at e400 [size=32]
0000:00:1d.3 0c03: 8086:24de (rev 02)
Subsystem: 1849:24d0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 4: I/O ports at e800 [size=32]
0000:00:1d.7 0c03: 8086:24dd (rev 02) (prog-if 20)
Subsystem: 1849:24d0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 193
Region 0: Memory at fe77bc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3h ot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]
0000:00:1e.0 0604: 8086:244e (rev c2)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 20000000-200fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 0601: 8086:24d0 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 0101: 8086:24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1849:24d0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at fc00 [size=16]
Region 5: Memory at 20100000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
Subsystem: 1849:24d0
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 7
Region 4: I/O ports at 0400 [size=32]
0000:00:1f.5 0401: 8086:24d5 (rev 02)
Subsystem: 1849:9739
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 217
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at d400 [size=64]
Region 2: Memory at fe77b800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fe77b400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3h ot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:03.0 0200: 10ec:8139 (rev 10)
Subsystem: 10ec:8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 201
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at fe5ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 20000000 [disabled] [size=64K]
0000:01:05.0 0200: 10ec:8139 (rev 10)
Subsystem: 1849:8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Step ping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort - <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 209
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at fe5ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3h ot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
sudo xresprobe i810
id: G150
res: 1024x768 832x624 800x600 720x400 640x480
freq: 48-54 48-50
disptype: crt
depth: 16
--
can't display 82865G driver vesa monitor G150
https://launchpad.net/bugs/96451
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
