Public bug reported:
After installation, the boot process stopped just after choosing kernel
(the default) in GRUB, the last message was
Starting up...
I assembled some details of my hadrware, mainboard and disks, also
output from fdisk.
ASUS P3V4X, chipset Apollo Pro 133A
Primary Master WDC WD205BA
Type AUTO
Cylinders 1024
Head 255
Sector 63
PIO Mode 4
ULTRA DMA Mode DISABLED
Secondary Master ASUS CD-S250/A
Secondary Slave NONE in Setup, however there is WDC AC23200L
Graphic card on AGP MGA G200 AXP
The installation was to /dev/hda3 . This is the output from 'fdisk
/dev/hda':
The number of cylinders for this disk is set to 2495.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
Disk /dev/hda: 20.5 GB, 20525137920 bytes
255 heads, 63 sectors/track, 2495 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 784 6297448+ 83 Linux
/dev/hda2 785 915 1052257+ 82 Linux swap / Solaris
/dev/hda3 916 1960 8393962+ 83 Linux
/dev/hda4 1961 2495 4297387+ 83 Linux
Command (m for help):
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
** Description changed:
After installation, the boot process stopped just after choosing kernel
(the default) in GRUB, the last message was
Starting up...
I assembled some details of my hadrware, mainboard and disks, also
output from fdisk.
ASUS P3V4X, chipset Apollo Pro 133A
Primary Master WDC WD205BA
Type AUTO
Cylinders 1024
Head 255
Sector 63
PIO Mode 4
ULTRA DMA Mode DISABLED
Secondary Master ASUS CD-S250/A
Secondary Slave NONE in Setup, however there is WDC AC23200L
Graphic card on AGP MGA G200 AXP
+ The installation was to /dev/hda3 . This is the output from 'fdisk
+ /dev/hda':
+
The number of cylinders for this disk is set to 2495.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
Disk /dev/hda: 20.5 GB, 20525137920 bytes
255 heads, 63 sectors/track, 2495 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 784 6297448+ 83 Linux
/dev/hda2 785 915 1052257+ 82 Linux swap / Solaris
/dev/hda3 916 1960 8393962+ 83 Linux
/dev/hda4 1961 2495 4297387+ 83 Linux
Command (m for help):
--
Ubuntu 7.04 does not boot
https://launchpad.net/bugs/99024
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
