** Attachment added: "dmesg.log" https://bugs.launchpad.net/bugs/641927/+attachment/1601699/+files/dmesg.log
** Description changed: When I wake up my computer after the "stand by" mode, I'm experiencing little display hangs about every second. When I read the output of dmesg, I can see plenty of lines like this one: [ 5180.581960] eth0: Too much work at interrupt, status=0x00ffffff. A new line like this appears for every hang. My workaround is to run: ifconfig eth0 down And the hang are not anymore. Then, if I run ifconfig eth0 up, the hang happen again. I'm running an updated Ubuntu 10.04 system, and here is my lspci output: 00:00.0 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:00.5 PIC: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt Controller 00:00.6 Host bridge: VIA Technologies, Inc. Device 6290 00:00.7 Host bridge: VIA Technologies, Inc. K8M890CE Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller 00:0f.0 RAID bus controller: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge 00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 02:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) 04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) 05:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) I also attached my dmesg log. + + Note : I don't use my eth0 wired interface, I'm using my wlan connection -- little hangs after stand by; eth0: Too much work at interrupt, status=0x00ffffff https://bugs.launchpad.net/bugs/641927 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
