*** This bug is a duplicate of bug 93490 ***
    https://bugs.launchpad.net/bugs/93490

Same problem with Intel HDA chipset on an Asus desktop system. My specs
are:

$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
High Definition Audio Controller (rev 04)
[EMAIL PROTECTED]:~$ lspci -vvn
00:00.0 0600: 8086:2584 (rev 0e)
        Subsystem: 8086:2580
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: <access denied>

00:01.0 0604: 8086:2585 (rev 0e) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: cff00000-cfffffff
        Prefetchable memory behind bridge: d0000000-dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1b.0 0403: 8086:2668 (rev 04)
        Subsystem: 1043:813d
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at cfbf4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:2660 (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1c.1 0604: 8086:2662 (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: cfe00000-cfefffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1c.2 0604: 8086:2664 (rev 04) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: cfd00000-cfdfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1d.0 0c03: 8086:2658 (rev 04) (prog-if 00 [UHCI])
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 4: I/O ports at 4000 [size=32]

00:1d.1 0c03: 8086:2659 (rev 04) (prog-if 00 [UHCI])
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 4400 [size=32]

00:1d.2 0c03: 8086:265a (rev 04) (prog-if 00 [UHCI])
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 4800 [size=32]

00:1d.3 0c03: 8086:265b (rev 04) (prog-if 00 [UHCI])
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at 5000 [size=32]

00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20 [EHCI])
        Subsystem: 1043:80a6
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at cfbff800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:244e (rev d4) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00007000-0000afff
        Memory behind bridge: cfc00000-cfcfffff
        Prefetchable memory behind bridge: 00000000c4000000-00000000c40fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1f.0 0601: 8086:2640 (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 0101: 8086:266f (rev 04) (prog-if 8a [Master SecP PriP])
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]

00:1f.2 0101: 8086:2652 (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1043:2601
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 6800 [size=8]
        Region 1: I/O ports at 6400 [size=4]
        Region 2: I/O ports at 6000 [size=8]
        Region 3: I/O ports at 5800 [size=4]
        Region 4: I/O ports at 5400 [size=16]
        Region 5: Memory at cfbffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:266a (rev 04)
        Subsystem: 1043:80a6
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 0
        Region 4: I/O ports at 0400 [size=32]

01:03.0 0c00: 104c:8025 (rev 01) (prog-if 10 [OHCI])
        Subsystem: 1043:813c
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 1000ns max), Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at cfcff000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at cfcf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

01:04.0 0180: 1283:8212 (rev 13)
        Subsystem: 1043:813a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (2000ns min, 2000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at 9000 [size=8]
        Region 1: I/O ports at 8800 [size=4]
        Region 2: I/O ports at 8400 [size=8]
        Region 3: I/O ports at 8000 [size=4]
        Region 4: I/O ports at 7800 [size=16]
        Expansion ROM at c4080000 [disabled] [size=128K]
        Capabilities: <access denied>

01:05.0 0180: 1095:3114 (rev 02)
        Subsystem: 1043:8136
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at a800 [size=8]
        Region 1: I/O ports at a400 [size=4]
        Region 2: I/O ports at a000 [size=8]
        Region 3: I/O ports at 9800 [size=4]
        Region 4: I/O ports at 9400 [size=16]
        Region 5: Memory at cfcffc00 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at c4000000 [disabled] [size=512K]
        Capabilities: <access denied>

02:00.0 0200: 11ab:4362 (rev 15)
        Subsystem: 1043:8142
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at cfdfc000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at b800 [size=256]
        Expansion ROM at cfdc0000 [disabled] [size=128K]
        Capabilities: <access denied>

03:00.0 0200: 11ab:4362 (rev 15)
        Subsystem: 1043:8142
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at cfefc000 (64-bit, non-prefetchable) [size=16K]
        Region 2: I/O ports at c800 [size=256]
        Expansion ROM at cfec0000 [disabled] [size=128K]
        Capabilities: <access denied>

05:00.0 0300: 1002:5e4b (prog-if 00 [VGA])
        Subsystem: 17af:2030
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at cffe0000 (64-bit, non-prefetchable) [size=64K]
        Region 4: I/O ports at e000 [size=256]
        Expansion ROM at cffc0000 [disabled] [size=128K]
        Capabilities: <access denied>

05:00.1 0380: 1002:5e6b
        Subsystem: 17af:2031
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 16 bytes
        Region 0: Memory at cfff0000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>

$ amixer 
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 153 [60%] [-20.40dB] [on]
  Front Right: Playback 153 [60%] [-20.40dB] [on]
Simple mixer control 'Surround',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'Center',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'LFE',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [on]
Simple mixer control 'Side',0
  Capabilities: pswitch
  Playback channels: Front Left - Front Right
  Mono:
  Front Left: Playback [on]
  Front Right: Playback [on]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined cswitch cswitch-joined
  Playback channels: Mono
  Capture channels: Mono
  Mono: Playback [off] Capture [on]
Simple mixer control 'PC Speaker',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 15
  Mono:
  Front Left: Playback 15 [100%] [0.00dB] [on]
  Front Right: Playback 15 [100%] [0.00dB] [on]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 30
  Front Left: Capture 25 [83%] [37.50dB] [on]
  Front Right: Capture 25 [83%] [37.50dB] [on]
Simple mixer control 'Capture',1
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 30
  Front Left: Capture 30 [100%] [45.00dB] [on]
  Front Right: Capture 30 [100%] [45.00dB] [on]
Simple mixer control 'Input Source',0
  Capabilities: enum
  Items: 'Front Mic' 'Rear Mic' 'Line' 'CD'
  Item0: 'Front Mic'
Simple mixer control 'Input Source',1
  Capabilities: enum
  Items: 'Front Mic' 'Rear Mic' 'Line' 'CD'
  Item0: 'Front Mic'

$ cat /proc/asound/cards 
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xcfbf4000 irq 16
 1 [UART           ]: MPU-401 UART - MPU-401 UART
                      MPU-401 UART at 0x300, irq 10

** This bug has been marked a duplicate of bug 93490
   ATi HDA Audio Regression 2.6.20-11

-- 
microphone doesn't work for recording (feisty)
https://bugs.launchpad.net/bugs/96268
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to