yes, it's only true with totem. but i also found that it only happens in the first minute, after that it plays normally.
dmesg [ 0.000000] Linux version 2.6.20-13-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Mar 25 00:21:25 UTC 2007 (Ubuntu 2.6.20-13.21-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f6a0000 end: 000000001f7a0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000001f7a0000 size: 000000000000e000 end: 000000001f7ae000 type: 3 [ 0.000000] copy_e820_map() start: 000000001f7ae000 size: 0000000000032000 end: 000000001f7e0000 type: 4 [ 0.000000] copy_e820_map() start: 000000001f7e0000 size: 0000000000020000 end: 000000001f800000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7a0000 (usable) [ 0.000000] BIOS-e820: 000000001f7a0000 - 000000001f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000001f7ae000 - 000000001f7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 503MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 128928) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 128928 [ 0.000000] HighMem 128928 -> 128928 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 128928 [ 0.000000] On node 0 totalpages: 128928 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 975 pages used for memmap [ 0.000000] Normal zone: 123857 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fafe0 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x08000625 MSFT 0x00000097) @ 0x1f7a0000 [ 0.000000] ACPI: FADT (v001 A M I OEMFACP 0x08000625 MSFT 0x00000097) @ 0x1f7a0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x08000625 MSFT 0x00000097) @ 0x1f7a0390 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x08000625 MSFT 0x00000097) @ 0x1f7ae040 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x08000625 MSFT 0x00000097) @ 0x1f7a4b60 [ 0.000000] ACPI: DSDT (v001 A0605 A0605000 0x00000000 INTL 0x02002026) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:6 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:e0380000) [ 0.000000] Detected 3066.791 MHz processor. [ 15.437750] Built 1 zonelists. Total pages: 127921 [ 15.437754] Kernel command line: root=UUID=6497a6c9-b006-468f-8e7b-5524125264f9 ro quiet splash [ 15.437905] mapped APIC to ffffd000 (fee00000) [ 15.437908] mapped IOAPIC to ffffc000 (fec00000) [ 15.437911] Enabling fast FPU save and restore... done. [ 15.437914] Enabling unmasked SIMD FPU exception support... done. [ 15.437922] Initializing CPU#0 [ 15.437988] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 15.439377] Console: colour VGA+ 80x25 [ 15.439580] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 15.439771] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 15.447201] Memory: 500288k/515712k available (1992k kernel code, 14892k reserved, 889k data, 328k init, 0k highmem) [ 15.447212] virtual kernel memory layout: [ 15.447213] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 15.447214] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 15.447215] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) [ 15.447216] lowmem : 0xc0000000 - 0xdf7a0000 ( 503 MB) [ 15.447217] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 15.447218] .data : 0xc02f2184 - 0xc03d06d4 ( 889 kB) [ 15.447219] .text : 0xc0100000 - 0xc02f2184 (1992 kB) [ 15.447222] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 15.525757] Calibrating delay using timer specific routine.. 6139.08 BogoMIPS (lpj=12278170) [ 15.525798] Security Framework v1.0.0 initialized [ 15.525802] SELinux: Disabled at boot. [ 15.525818] Mount-cache hash table entries: 512 [ 15.525942] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e41d 00000000 00000001 [ 15.525951] monitor/mwait feature present. [ 15.525953] using mwait in idle threads. [ 15.525960] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 15.525962] CPU: L2 cache: 512K [ 15.525965] CPU: Hyper-Threading is disabled [ 15.525967] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003180 0000e41d 00000000 00000001 [ 15.525977] Compat vDSO mapped to ffffe000. [ 15.525981] Remapping vsyscall page to ffffe000 [ 15.525995] Checking 'hlt' instruction... OK. [ 15.541801] SMP alternatives: switching to UP code [ 15.541979] Freeing SMP alternatives: 11k freed [ 15.542180] Early unpacking initramfs... done [ 15.810079] ACPI: Core revision 20060707 [ 15.810241] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 15.823665] CPU0: Intel(R) Celeron(R) D CPU 3.06GHz stepping 05 [ 15.823704] Total of 1 processors activated (6139.08 BogoMIPS). [ 15.823858] ENABLING IO-APIC IRQs [ 15.824043] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 15.968594] Brought up 1 CPUs [ 15.968825] Booting paravirtualized kernel on bare hardware [ 15.968900] Time: 6:53:45 Date: 03/03/107 [ 15.968926] NET: Registered protocol family 16 [ 15.969016] EISA bus registered [ 15.969021] ACPI: bus type pci registered [ 15.969309] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 [ 15.969312] PCI: Using configuration type 1 [ 15.969313] Setting up standard PCI resources [ 15.983298] ACPI: Interpreter enabled [ 15.983303] ACPI: Using IOAPIC for interrupt routing [ 15.984416] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 15.984425] PCI: Probing PCI hardware (bus 00) [ 15.984725] Boot video device is 0000:00:02.0 [ 15.985227] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 15.985231] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 15.985790] PCI: Transparent bridge - 0000:00:1e.0 [ 15.985842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 15.988540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 15.988862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 15.989160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 15.995647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.995906] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 15.996161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.996414] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 15.996710] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 15.996962] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 15.997216] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 15.997470] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 15.997565] Linux Plug and Play Support v0.97 (c) Adam Belay [ 15.997579] pnp: PnP ACPI init [ 16.002442] pnp: PnP ACPI: found 17 devices [ 16.002449] PnPBIOS: Disabled by ACPI PNP [ 16.002499] PCI: Using ACPI for IRQ routing [ 16.002502] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.016249] NET: Registered protocol family 8 [ 16.016252] NET: Registered protocol family 20 [ 16.017162] pnp: 00:08: ioport range 0x290-0x297 has been reserved [ 16.017491] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 16.017497] PCI: Bridge: 0000:00:1c.0 [ 16.017500] IO window: e000-efff [ 16.017505] MEM window: disabled. [ 16.017509] PREFETCH window: disabled. [ 16.017514] PCI: Bridge: 0000:00:1c.1 [ 16.017517] IO window: d000-dfff [ 16.017523] MEM window: dff00000-dfffffff [ 16.017527] PREFETCH window: disabled. [ 16.017532] PCI: Bridge: 0000:00:1e.0 [ 16.017535] IO window: c000-cfff [ 16.017540] MEM window: dfe00000-dfefffff [ 16.017544] PREFETCH window: disabled. [ 16.017576] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.017584] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.017605] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 16.017611] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.017622] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 16.017648] NET: Registered protocol family 2 [ 16.056388] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 16.056463] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 16.056540] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 16.056578] TCP: Hash tables configured (established 16384 bind 8192) [ 16.056581] TCP reno registered [ 16.068417] checking if image is initramfs... it is [ 16.593109] Freeing initrd memory: 6766k freed [ 16.593570] audit: initializing netlink socket (disabled) [ 16.593584] audit(1175583225.228:1): initialized [ 16.593703] VFS: Disk quotas dquot_6.5.1 [ 16.593721] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 16.593767] io scheduler noop registered [ 16.593770] io scheduler anticipatory registered [ 16.593772] io scheduler deadline registered [ 16.593780] io scheduler cfq registered (default) [ 16.593994] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 16.594042] assign_interrupt_mode Found MSI capability [ 16.594046] Allocate Port Service[0000:00:1c.0:pcie00] [ 16.594082] Allocate Port Service[0000:00:1c.0:pcie02] [ 16.594188] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 16.594234] assign_interrupt_mode Found MSI capability [ 16.594236] Allocate Port Service[0000:00:1c.1:pcie00] [ 16.594401] isapnp: Scanning for PnP cards... [ 16.945428] isapnp: No Plug & Play device found [ 16.977930] Real Time Clock Driver v1.12ac [ 16.977982] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 16.978102] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.979064] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 16.979347] mice: PS/2 mouse device common for all mice [ 16.979920] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 16.980167] input: Macintosh mouse button emulation as /class/input/input0 [ 16.980204] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 16.980209] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 16.980418] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 16.980421] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 16.983158] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.983165] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 16.983329] EISA: Probing bus 0 at eisa.0 [ 16.983358] Cannot allocate resource for EISA slot 8 [ 16.983360] EISA: Detected 0 cards. [ 17.013361] TCP cubic registered [ 17.013367] NET: Registered protocol family 1 [ 17.013390] Using IPI No-Shortcut mode [ 17.013455] ACPI: (supports S0 S1 S3 S4 S5) [ 17.013500] Magic number: 3:185:872 [ 17.013601] hash matches device ptytd [ 17.013714] Time: tsc clocksource has been installed. [ 17.013881] Freeing unused kernel memory: 328k freed [ 17.027660] input: AT Translated Set 2 keyboard as /class/input/input1 [ 18.225348] Capability LSM initialized [ 18.262288] ACPI: Processor [CPU1] (supports 8 throttling states) [ 18.262299] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 18.689504] usbcore: registered new interface driver usbfs [ 18.689528] usbcore: registered new interface driver hub [ 18.689552] usbcore: registered new device driver usb [ 18.690441] USB Universal Host Controller Interface driver v3.0 [ 18.690491] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 [ 18.690503] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 18.690507] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 18.690643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 18.690673] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00009000 [ 18.690782] usb usb1: configuration #1 chosen from 1 choice [ 18.690810] hub 1-0:1.0: USB hub found [ 18.690817] hub 1-0:1.0: 2 ports detected [ 18.766850] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 18.793119] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 18.793131] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 18.793136] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 18.793157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 18.793188] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400 [ 18.793283] usb usb2: configuration #1 chosen from 1 choice [ 18.793309] hub 2-0:1.0: USB hub found [ 18.793316] hub 2-0:1.0: 2 ports detected [ 18.875255] Floppy drive(s): fd0 is 1.44M [ 18.896876] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 18.896889] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 18.896893] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 18.896916] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 18.896946] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00009800 [ 18.897038] usb usb3: configuration #1 chosen from 1 choice [ 18.897064] hub 3-0:1.0: USB hub found [ 18.897071] hub 3-0:1.0: 2 ports detected [ 18.918164] FDC 0 is a post-1991 82077 [ 19.000512] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20 [ 19.000524] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 19.000528] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 19.000558] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 19.000588] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000a000 [ 19.000680] usb usb4: configuration #1 chosen from 1 choice [ 19.000707] hub 4-0:1.0: USB hub found [ 19.000714] hub 4-0:1.0: 2 ports detected [ 19.105860] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 [ 19.105879] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 19.105884] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 19.105933] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 19.105970] ehci_hcd 0000:00:1d.7: debug port 1 [ 19.105976] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 19.105985] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdfdffc00 [ 19.109869] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.109952] usb usb5: configuration #1 chosen from 1 choice [ 19.109981] hub 5-0:1.0: USB hub found [ 19.109991] hub 5-0:1.0: 8 ports detected [ 19.136058] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 19.217990] SCSI subsystem initialized [ 19.222992] 8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 19.222996] 8139cp 0000:01:01.0: Try the "8139too" driver instead. [ 19.225103] 8139too Fast Ethernet driver 0.9.28 [ 19.225158] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 19.225526] eth0: RealTek RTL8139 at 0xe0052c00, 00:0e:2e:75:74:cf, IRQ 21 [ 19.225528] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 19.227387] libata version 2.20 loaded. [ 19.231800] ata_piix 0000:00:1f.1: version 2.10ac1 [ 19.231821] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 19.231843] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 19.231978] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 19.232010] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 19.232029] scsi0 : ata_piix [ 19.565079] ATA: abnormal status 0x7F on port 0x000101f7 [ 19.742671] ata1.01: ATAPI, max UDMA/66 [ 19.922191] ata1.01: configured for UDMA/33 [ 19.922204] scsi1 : ata_piix [ 19.933901] usb 2-1: new low speed USB device using uhci_hcd and address 3 [ 20.087616] ATA: abnormal status 0x7F on port 0x00010177 [ 20.088644] scsi 0:0:1:0: CD-ROM LITE-ON DVDRW LH-18A1P GL0B PQ: 0 ANSI: 5 [ 20.088950] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 20.088982] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23 [ 20.089000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 20.089039] ata3: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b402 bmdma 0x0001a400 irq 23 [ 20.089066] ata4: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001a802 bmdma 0x0001a408 irq 23 [ 20.089080] scsi2 : ata_piix [ 20.117673] usb 2-1: configuration #1 chosen from 1 choice [ 20.256312] ata3.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133 [ 20.256317] ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 20.268143] ata3.00: configured for UDMA/133 [ 20.268155] scsi3 : ata_piix [ 20.356758] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 20.430701] ATA: abnormal status 0x7F on port 0x0001b007 [ 20.430828] scsi 2:0:0:0: Direct-Access ATA HDT722516DLA380 V43O PQ: 0 ANSI: 5 [ 20.448265] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 20.448272] Uniform CD-ROM driver Revision: 3.20 [ 20.448437] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 20.451996] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 20.452020] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 20.458011] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) [ 20.458028] sda: Write Protect is off [ 20.458031] sda: Mode Sense: 00 3a 00 00 [ 20.458049] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.458110] SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) [ 20.458121] sda: Write Protect is off [ 20.458123] sda: Mode Sense: 00 3a 00 00 [ 20.458140] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.458143] sda: sda1 sda2 sda3 sda4 [ 20.483586] sd 2:0:0:0: Attached scsi disk sda [ 20.522537] usb 4-1: configuration #1 chosen from 1 choice [ 20.528579] usbcore: registered new interface driver hiddev [ 20.541576] input: Logitech Logitech USB Optical Mouse as /class/input/input2 [ 20.541602] input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1 [ 20.541619] usbcore: registered new interface driver usbhid [ 20.541623] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 20.675013] Attempting manual resume [ 20.675018] swsusp: Resume From Partition 8:2 [ 20.675020] PM: Checking swsusp image. [ 20.675193] PM: Resume from disk failed. [ 20.706591] kjournald starting. Commit interval 5 seconds [ 20.706603] EXT3-fs: mounted filesystem with ordered data mode. [ 27.080819] eth0: link down [ 28.422065] NET: Registered protocol family 17 [ 28.558470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.584050] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 29.093763] intel_rng: FWH not detected [ 29.108004] Linux agpgart interface v0.102 (c) Dave Jones [ 29.109672] agpgart: Detected an Intel 945G Chipset. [ 29.109794] agpgart: Detected 7932K stolen memory. [ 29.127739] agpgart: AGP aperture is 256M @ 0xe0000000 [ 29.470372] input: PC Speaker as /class/input/input3 [ 29.541720] iTCO_vendor_support: vendor-support=0 [ 29.542807] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 29.542903] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 29.542958] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 29.553305] Attansic L1 Ethernet Network Driver - version 2.0.6 [ 29.553309] Copyright(c) 2005-2006 Attansic Corporation. [ 29.553369] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 29.553381] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 29.688610] irda_init() [ 29.688626] NET: Registered protocol family 23 [ 29.798042] SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200 [ 29.798113] drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0 [ 29.798124] usbcore: registered new interface driver stir4200 [ 29.809033] parport: PnPBIOS parport detected. [ 29.809146] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 29.929287] atl1 0000:02:00.0: Unable to enable MSI: -22 [ 30.018660] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20 [ 30.018678] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 30.473482] fuse init (API version 7.8) [ 30.492673] lp0: using parport0 (interrupt-driven). [ 30.528410] Adding 996020k swap on /dev/disk/by-uuid/0395e2e9-b1c3-4673-9499-f2418654de1d. Priority:-1 extents:1 across:996020k [ 31.373049] atl1: eth1 link is up 100 Mbps full duplex [ 66.604770] EXT3 FS on sda3, internal journal [ 66.866022] kjournald starting. Commit interval 5 seconds [ 66.866246] EXT3 FS on sda4, internal journal [ 66.866254] EXT3-fs: mounted filesystem with ordered data mode. [ 66.892914] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 66.946455] NTFS volume version 3.1. [ 71.220924] Using specific hotkey driver [ 71.278125] No dock devices found. [ 71.386234] ibm_acpi: ec object not found [ 71.477470] input: Power Button (FF) as /class/input/input4 [ 71.497723] ACPI: Power Button (FF) [PWRF] [ 71.545673] input: Power Button (CM) as /class/input/input5 [ 71.565690] ACPI: Power Button (CM) [PWRB] [ 71.616601] pcc_acpi: loading... [ 75.036708] ppdev: user-space parallel port driver [ 75.724762] [drm] Initialized drm 1.1.0 20060810 [ 75.729857] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 75.732294] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 76.570606] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 76.570612] apm: overridden by ACPI. [ 76.842377] Bluetooth: Core ver 2.11 [ 76.842440] NET: Registered protocol family 31 [ 76.842443] Bluetooth: HCI device and connection manager initialized [ 76.842446] Bluetooth: HCI socket layer initialized [ 76.918090] Bluetooth: L2CAP ver 2.8 [ 76.918095] Bluetooth: L2CAP socket layer initialized [ 76.994319] Bluetooth: RFCOMM socket layer initialized [ 76.994333] Bluetooth: RFCOMM TTY layer initialized [ 76.994335] Bluetooth: RFCOMM ver 1.8 -- problem with totem https://bugs.launchpad.net/bugs/99242 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
