Hi Martin,

I tried your update at the 10.04.

by plugging in usb keys (huawei e220 or the ironkey) linux gives alerts
"could not mount /dev/sr0 sr1. "
devices do mount actually, but give these alerts.

below you find the output as it is at 10.04

main: probing: '/dev/sr1'
cd_inquiry: INQUIRY: [IronKey ][CD-ROM          ][2.08]
info_scsi_cmd_err: GET CONFIGURATION failed with SK=5h/ASC=20h/ACQ=00h
cd_profiles: drive is pre-MMC2 and does not support 46h get configuration
command
cd_profiles: trying to work around the problem
info_scsi_cmd_err: READ DISC INFORMATION failed with SK=5h/ASC=20h/ACQ=00h
cd_profiles_old_mmc: no current profile, but disc is present; assuming
CD-ROM
cd_media_toc: READ TOC: len: 48, start track: 1, end track: 1
cd_media_toc: track=0 info=0x4(data) start_block=0
cd_media_toc: last track 0 starts at block 0
info_scsi_cmd_err: READ DISC INFORMATION failed with SK=5h/ASC=20h/ACQ=00h
ID_CDROM=1
ID_CDROM_MEDIA=1
ID_CDROM_MEDIA_CD=1
ID_CDROM_MEDIA_TRACK_COUNT_DATA=1
ban...@goloka-vrindaban:~$


dmesg:
[ 3016.696101] usb 1-3: new high speed USB device using ehci_hcd and address
9
[ 3016.849881] scsi27 : usb-storage 1-3:1.0
[ 3020.076701] scsi 27:0:0:0: CD-ROM            IronKey  CD-ROM
2.08 PQ: 0 ANSI: 0
[ 3020.078165] scsi 27:0:0:1: Direct-Access     IronKey  Secure Drive
2.08 PQ: 0 ANSI: 0
[ 3020.270971] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 3020.271331] sr 27:0:0:0: Attached scsi CD-ROM sr1
[ 3020.271540] sr 27:0:0:0: Attached scsi generic sg2 type 5
[ 3020.271998] sd 27:0:0:1: Attached scsi generic sg3 type 0
[ 3020.298658] sd 27:0:0:1: [sdb] Attached SCSI removable disk
[ 3020.905602] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 3020.906595] ISO 9660 Extensions: RRIP_1991A
ban...@goloka-vrindaban:~$

lsusb -v:

lsusb -v

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 005: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA
Modem / E270 HSDPA/HSUPA Modem
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x12d1 Huawei Technologies Co., Ltd.
  idProduct          0x1003 E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
  bcdDevice            0.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           85
    bNumInterfaces          3
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval             128
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
cannot read device status, Operation not permitted (1)

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 009: ID 1953:0202 Ironkey Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1953 Ironkey Inc.
  idProduct          0x0202
  bcdDevice            2.08
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

For my convience I'll rollback to previous version udev..

good luck..


2010/10/6 Bankey BiHari Dassa <bankey.biharida...@gmail.com>

> well, it's not about what i prefer..
> the bug does not show with 10.04, but does with 10.10...
> so if we want to tackle this one, i guess let's try it later on with
> maverick pakackhes..
>
>
>
> 2010/10/6 Martin Pitt <martin.p...@ubuntu.com>
>
>> Hello bankey,
>>
>>
>> bankey [2010-10-06 16:43 -0000]:
>> > BTW: a bit of the ppa gives a problem:
>> > Err http://ppa.launchpad.net maverick/main Sources
>> >   404  Not Found
>>
>> Right, it only has packages for lucid.
>>
>> If you prefer trying this on maverick, I'll prepare a package for you
>> tomorrow, and follow up here.
>>
>> --
>> Martin Pitt                        | http://www.piware.de
>> Ubuntu Developer (www.ubuntu.com)  | Debian Developer  (www.debian.org)
>>
>> --
>> mounting hardware encrypted usb stick failes
>> https://bugs.launchpad.net/bugs/653568
>> You received this bug notification because you are a direct subscriber
>> of the bug.
>>
>> Status in “udev” package in Ubuntu: Incomplete
>>
>> Bug description:
>> Binary package hint: util-linux
>>
>> Key is seen in dmesg.
>> appears in nautilus, but failes to mount.
>> mouning as root failes.
>>
>> in 9.04 till 10.04 it works flawless.
>>
>> bug regognision ironkey
>>
>> [  158.024073] usb 1-1: new high speed USB device using ehci_hcd and
>> address 5
>> [  158.173004] scsi7 : usb-storage 1-1:1.0
>> [  161.378310] scsi 7:0:0:0: CD-ROM            IronKey  CD-ROM
>> 2.08 PQ: 0 ANSI: 0
>> [  161.379764] scsi 7:0:0:1: Direct-Access     IronKey  Secure Drive
>> 2.08 PQ: 0 ANSI: 0
>> [  161.577707] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>> [  161.578058] sr 7:0:0:0: Attached scsi CD-ROM sr0
>> [  161.578262] sr 7:0:0:0: Attached scsi generic sg1 type 5
>> [  161.578699] sd 7:0:0:1: Attached scsi generic sg2 type 0
>> [  161.599177] sd 7:0:0:1: [sdb] Attached SCSI removable disk
>>
>> ban...@goloka-vrindaban:~$ lsusb
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA
>> Modem / E270 HSDPA/HSUPA Modem
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 005: ID 1953:0202 Ironkey Inc.
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> lshal:
>> usb_device_1d6b_2_0000_00_1d_7'  (string)
>>  info.product = 'IronKey'  (string)
>>  info.subsystem = 'usb_device'  (string)
>>  info.udi = '/org/freedesktop/Hal/devices/usb_device_1953_202_00420993'
>>  (string)
>>  info.vendor = 'Ironkey Inc.'  (string)
>>  linux.device_file = '/dev/bus/usb/001/005'  (string)
>>  linux.hotplug_type = 2  (0x2)  (int)
>>  linux.subsystem = 'usb'  (string)
>>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1'
>>  (string)
>>  usb_device.bus_number = 1  (0x1)  (int)
>>  usb_device.can_wake_up = false  (bool)
>>  usb_device.configuration_value = 1  (0x1)  (int)
>>  usb_device.device_class = 0  (0x0)  (int)
>>  usb_device.device_protocol = 0  (0x0)  (int)
>>  usb_device.device_revision_bcd = 520  (0x208)  (int)
>>  usb_device.device_subclass = 0  (0x0)  (int)
>>  usb_device.is_self_powered = false  (bool)
>>  usb_device.linux.device_number = 5  (0x5)  (int)
>>  usb_device.linux.sysfs_path =
>> '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1'  (string)
>>  usb_device.max_power = 200  (0xc8)  (int)
>>  usb_device.num_configurations = 1  (0x1)  (int)
>>  usb_device.num_interfaces = 1  (0x1)  (int)
>>  usb_device.num_ports = 0  (0x0)  (int)
>>  usb_device.product = 'IronKey'  (string)
>>  usb_device.product_id = 514  (0x202)  (int)
>>  usb_device.serial = '00420993'  (string)
>>  usb_device.speed = 480.0 (480) (double)
>>  usb_device.vendor = 'Ironkey Inc.'  (string)
>>  usb_device.vendor_id = 6483  (0x1953)  (int)
>>  usb_device.version = 2.0 (2) (double)
>>
>> ProblemType: Bug
>> DistroRelease: Ubuntu 10.10
>> Package: mount 2.17.2-0ubuntu1
>> ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4
>> Uname: Linux 2.6.35-22-generic i686
>> Architecture: i386
>> Date: Sat Oct  2 14:16:35 2010
>> EcryptfsInUse: Yes
>> InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release i386
>> (20100816.1)
>> ProcEnviron:
>>  LC_TIME=en_GB.UTF-8
>>  LANG=en_US.utf8
>>  SHELL=/bin/bash
>> SourcePackage: util-linux
>>
>> To unsubscribe from this bug, go to:
>> https://bugs.launchpad.net/ubuntu/+source/udev/+bug/653568/+subscribe
>>
>
>
>
> --
> With the best regards, love and peace,
>
> Bankey/Arno
>
> http://bankeybihari.hyves.nl
> *****************************************
>


-- 
With the best regards, love and peace,

Bankey/Arno

http://bankeybihari.hyves.nl
*****************************************

-- 
mounting hardware encrypted usb stick failes
https://bugs.launchpad.net/bugs/653568
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to