** Description changed: Installed Lucid Alpha 2 and the daily build but the RT3090 Wireless chip isn't supported. This works in Karmic using this PPA: https://launchpad.net/~markus- tisoft/+archive/rt3090 In Lucid it seems to want to try to use the chip, and it creates a device and loads the rt3090sta module but iwlist scanning doesn't return any results. lspci -vvv (from karmic): 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe - Subsystem: Device 1a3b:1087 - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 32 bytes - Interrupt: pin A routed to IRQ 17 - Region 0: Memory at fbff0000 (32-bit, non-prefetchable) [size=64K] - Capabilities: [40] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable- - Address: 0000000000000000 Data: 0000 - Capabilities: [70] Express (v2) Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited - ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- - LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us - ClockPM+ Suprise- LLActRep- BwNot- - LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ - ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - Capabilities: [100] Advanced Error Reporting <?> - Capabilities: [140] Device Serial Number 1c-4b-d6-2d-3a-4d-00-00 - Kernel driver in use: rt2860 - Kernel modules: rt3090sta + Subsystem: Device 1a3b:1087 + Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- + Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- + Latency: 0, Cache Line Size: 32 bytes + Interrupt: pin A routed to IRQ 17 + Region 0: Memory at fbff0000 (32-bit, non-prefetchable) [size=64K] + Capabilities: [40] Power Management version 3 + Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-) + Status: D0 PME-Enable- DSel=0 DScale=0 PME- + Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable- + Address: 0000000000000000 Data: 0000 + Capabilities: [70] Express (v2) Endpoint, MSI 00 + DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited + ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- + DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- + RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- + MaxPayload 128 bytes, MaxReadReq 512 bytes + DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- + LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us + ClockPM+ Suprise- LLActRep- BwNot- + LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ + ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- + LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- + Capabilities: [100] Advanced Error Reporting <?> + Capabilities: [140] Device Serial Number 1c-4b-d6-2d-3a-4d-00-00 + Kernel driver in use: rt2860 + Kernel modules: rt3090sta Sorry not sure what package this driver is from (Linux-firmware?) but let me know if you need any more info. This chip is in an Asus EEE 1001HA.
-- Ralink RT3090 Wireless Not Supported in Lucid https://bugs.launchpad.net/bugs/541620 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
