Same problem using an updated 2.6.20 kernel on an HP 500 notebook.
dmesg says :
[ 75.572000] [drm] Initialized drm 1.1.0 20060810
[ 75.620000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 19
[ 75.620000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 88.184000] eth0: no IPv6 routers present
[ 687.500000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 687.500000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0
data 0
[ 687.500000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4
(timeout)
[ 694.500000] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 717.516000] ata1: port failed to respond (30 secs, Status 0xd0)
[ 717.516000] ata1: soft resetting port
[ 717.868000] ata1.00: configured for UDMA/100
[ 718.048000] ata1.01: configured for MWDMA2
[ 718.048000] ata1: EH complete
[ 718.064000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 718.064000] sda: Write Protect is off
[ 718.064000] sda: Mode Sense: 00 3a 00 00
[ 718.064000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 718.064000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 718.064000] sda: Write Protect is off
[ 718.064000] sda: Mode Sense: 00 3a 00 00
[ 718.064000] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1673.024000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1673.024000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0
data 0
[ 1673.024000] res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4
(timeout)
[ 1680.024000] ata1: port is slow to respond, please be patient (Status 0xd0)
[ 1703.040000] ata1: port failed to respond (30 secs, Status 0xd0)
[ 1703.040000] ata1: soft resetting port
[ 1703.392000] ata1.00: configured for UDMA/100
[ 1703.572000] ata1.01: configured for MWDMA2
[ 1703.572000] ata1: EH complete
[ 1703.588000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 1703.588000] sda: Write Protect is off
[ 1703.588000] sda: Mode Sense: 00 3a 00 00
[...]
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML
Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express
Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
(rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
IDE Controller (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network
Connection (rev 05)
02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection
(rev 03)
** Changed in: linux-source-2.6.20 (Ubuntu)
Sourcepackagename: linux-source-2.6.17 => linux-source-2.6.20
Status: Unconfirmed => Confirmed
--
log says "ata1 is slow to respond, please be patient"
https://bugs.launchpad.net/bugs/64587
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
