hmmm...well it didn't work for with my hardware for some reason. I'll post all that I know about my system and maybe someone will spot out the problem...the following was all I could gather from the original WeTab Os that came preinstalled:
/etc/X11/xorg.conf.d/99-calibration.conf ection "InputClass" Identifier "default" Driver "evdev" EndSection Section "InputClass" Identifier "calibration" MatchProduct "eGalax Inc. USB TouchController" Option "Calibration" "-5 4100 59 4100" EndSection lsusb gives the following output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 011: ID 12d1:1404 Huawei Technologies Co., Ltd. Bus 002 Device 007: ID 04f2:b213 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0eef:72a1 D-WAV Scientific Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Note the 2nd record from the bottom: Bus 003 Device 002: ID 0eef:72a1 D-WAV Scientific Co., Ltd. Most posts mention that there should also exist 'egalax...' at the end of the given string, not sure if that matters. Futhermore looking at xinput -list output we get the following: -Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ eGalax Inc. USB TouchController id=11 [slave pointer (2)] ⎣ Virtual core keyboard id=3 [master keyboard (2)] ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)] ↳ Power Button id=6 [slave keyboard (3)] ↳ Video Bus id=7 [slave keyboard (3)] ↳ Power Button id=8 [slave keyboard (3)] ↳ USB 2.0 Camera id=12 [slave keyboard (3)] ↳ Asus Laptop extra buttons id=13 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)] ↳ USB Keyboard id=9 [slave keyboard (3)] ↳ USB Keyboard id=10 [slave keyboard (3)] For more info on the eGalax device we issue: xinput -list-props 11 Device 'eGalax Inc. USB TouchController': Device Enabled (132): 1 Device Accel Profile (252): 0 Device Accel Constant Deceleration (253): 1.000000 Device Accel Adaptive Deceleration (255): 1.000000 Device Accel Velocity Scaling (256): 10.000000 Evdev Reopen Attempts (248): 10 Evdev Axis Inversion (257): 0, 0 Evdev Axis Calibration (258): -5, 4100, 59, 4100 Evdev Axes Swap (259): 0 Axis Labels (260): "Abs X" (250), "Abs Y" (251), "None" (0), "None" (0), "None" (0) Button Labels (261): "Button Unknown" (249), "Button Unknown" (249), "Button Unknown" (249), "Button Wheel Up" (136), "Button Wheel Down" (137) Evdev Middle Button Emulation (262): 2 Evdev Middle Button Timeout (263): 50 Evdev Wheel Emulation (264): 0 Evdev Wheel Emulation Axes (265): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (266): 10 Evdev Wheel Emulation Timeout (267): 200 Evdev Wheel Emulation Button (268): 4 Evdev Drag Lock Buttons (269): 0 Ok let's what xorg has to say about all this: cat /var/log/Xorg.0.log |grep -i egalax [ 11.935] (II) config/udev: Adding input device eGalax Inc. USB TouchController (/dev/input/event6) [ 11.935] (**) eGalax Inc. USB TouchController: Applying InputClass "default" [ 11.935] (**) eGalax Inc. USB TouchController: Applying InputClass "calibration" [ 11.935] (**) eGalax Inc. USB TouchController: always reports core events [ 11.935] (**) eGalax Inc. USB TouchController: Device: "/dev/input/event6" [ 11.940] (II) eGalax Inc. USB TouchController: Found absolute axes [ 11.940] (II) eGalax Inc. USB TouchController: Found x and y absolute axes [ 11.940] (II) eGalax Inc. USB TouchController: Found absolute touchscreen [ 11.940] (II) eGalax Inc. USB TouchController: Configuring as touchscreen [ 11.940] (**) eGalax Inc. USB TouchController: YAxisMapping: buttons 4 and 5 [ 11.940] (**) eGalax Inc. USB TouchController: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 11.940] (II) XINPUT: Adding extended input device "eGalax Inc. USB TouchController" (type: TOUCHSCREEN) [ 11.940] (II) eGalax Inc. USB TouchController: initialized for absolute axes. [ 11.941] (II) config/udev: Adding input device eGalax Inc. USB TouchController (/dev/input/mouse0) [ 11.941] (**) eGalax Inc. USB TouchController: Applying InputClass "default" [ 11.941] (**) eGalax Inc. USB TouchController: Applying InputClass "calibration" [ 11.941] (**) eGalax Inc. USB TouchController: always reports core events [ 11.941] (**) eGalax Inc. USB TouchController: Device: "/dev/input/mouse0" [ 11.950] (EE) PreInit returned NULL for "eGalax Inc. USB TouchController" [ 2400.623] (II) eGalax Inc. USB TouchController: Device reopened after 1 attempts. [ 3907.858] (II) config/udev: removing device eGalax Inc. USB TouchController [ 3907.860] (II) eGalax Inc. USB TouchController: Close [ 3990.426] (II) config/udev: Adding input device eGalax Inc. USB TouchController (/dev/input/mouse0) [ 3990.426] (**) eGalax Inc. USB TouchController: Applying InputClass "default" [ 3990.426] (**) eGalax Inc. USB TouchController: Applying InputClass "calibration" [ 3990.426] (**) eGalax Inc. USB TouchController: always reports core events [ 3990.426] (**) eGalax Inc. USB TouchController: Device: "/dev/input/mouse0" [ 3990.437] (EE) PreInit returned NULL for "eGalax Inc. USB TouchController" [ 3990.437] (II) config/udev: Adding input device eGalax Inc. USB TouchController (/dev/input/event6) [ 3990.437] (**) eGalax Inc. USB TouchController: Applying InputClass "default" [ 3990.437] (**) eGalax Inc. USB TouchController: Applying InputClass "calibration" [ 3990.437] (**) eGalax Inc. USB TouchController: always reports core events [ 3990.437] (**) eGalax Inc. USB TouchController: Device: "/dev/input/event6" [ 3990.440] (II) eGalax Inc. USB TouchController: Found absolute axes [ 3990.440] (II) eGalax Inc. USB TouchController: Found x and y absolute axes [ 3990.440] (II) eGalax Inc. USB TouchController: Found absolute touchscreen [ 3990.440] (II) eGalax Inc. USB TouchController: Configuring as touchscreen [ 3990.440] (**) eGalax Inc. USB TouchController: YAxisMapping: buttons 4 and 5 [ 3990.440] (**) eGalax Inc. USB TouchController: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 3990.440] (II) XINPUT: Adding extended input device "eGalax Inc. USB TouchController" (type: TOUCHSCREEN) [ 3990.440] (II) eGalax Inc. USB TouchController: initialized for absolute axes. finally for good measure I had a look at the loaded modules: lsmod Module Size Used by hid_egalax 2819 0 ath3k 1869 0 fuse 48766 2 uvcvideo 46234 0 pega_ext 2136 0 i2c_dev 4425 0 nls_utf8 989 0 ath9k 59197 0 ath9k_common 4376 1 ath9k option 12705 0 ath9k_hw 260533 2 ath9k,ath9k_common ath 7006 2 ath9k,ath9k_hw usb_wwan 8028 1 option mac80211 182073 2 ath9k,ath9k_common usbserial 27143 2 option,usb_wwan i2c_i801 7159 0 joydev 7182 0 cfg80211 113917 4 ath9k,ath9k_common,ath,mac80211 asus_laptop 11967 0 crystalhd 75313 0 battery 8542 0 sparse_keymap 2393 1 asus_laptop hid_egalax caught my eye and i ran modinfo filename: /lib/modules/2.6.35.3-10341.1.4-wetab/kernel/drivers/hid/hid-egalax.ko license: GPL description: eGalax dual-touch panel author: Stephane Chatty alias: hid:b0003v00000EEFp000072A1 alias: hid:b0003v00000EEFp0000726B alias: hid:b0003v00000EEFp0000480D depends: vermagic: 2.6.35.3-10341.1.4-wetab SMP preempt mod_unload PENTIUMM On Ubuntu the lsmod does not show hid_egalax being loaded. Also the Xorg.0.log on Ubuntu shows the touchscreen being identified as a Tablet. -- eGalax touchscreen configured as tablet https://bugs.launchpad.net/bugs/549447 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
