Tested on linux-linaro-2.6.35-1008.
ubu...@ubuntu:~$ uname -a
Linux ubuntu 2.6.35-1008-linaro-omap #15-Ubuntu Fri Oct 22 11:56:29
UTC 2010 armv7l GNU/Linux
ubu...@ubuntu:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 4e:82:aa:8e:d2:0b
inet addr:192.168.2.165 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::4c82:aaff:fe8e:d20b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30 errors:0 dropped:0 overruns:0 frame:0
TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4284 (4.2 KB) TX bytes:7347 (7.3 KB)
Interrupt:80
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
Ethernet works.
Cheers,
Enric
2010/11/7 Enric Balletbò i Serra <[email protected]>:
> Hi,
>
> I can test. Exactly which package should I test ?
>
> With latest kernel build from maverick repository I can have access to
> the network interface on my IGEP v2 board.
>
> Cheers,
>
> Enric
>
> 2010/11/5 Ricardo Lameiro <[email protected]>:
>> I cant test it before !! November. Can someone else test it?
>>
>> --
>> linux-omap cant bring up eth0 on igepv2 board, no network
>> https://bugs.launchpad.net/bugs/645689
>> You received this bug notification because you are a direct subscriber
>> of the bug.
>>
>> Status in “linux” package in Ubuntu: Incomplete
>> Status in “linux” source package in Maverick: Fix Committed
>>
>> Bug description:
>> Using this kernel, i can't have access to the network interface on the
>> IGEPv2.
>> Also, if you look at the crash report, lspci brings an error.
>>
>> ProblemType: Bug
>> DistroRelease: Ubuntu 10.10
>> Package: linux-omap 2.6.35.22.23
>> Regression: No
>> Reproducible: Yes
>> ProcVersionSignature: Ubuntu 2.6.35-22.33-omap 2.6.35.4
>> Uname: Linux 2.6.35-22-omap armv7l
>> AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
>> AplayDevices:
>> **** List of PLAYBACK Hardware Devices ****
>> card 0: igep2 [igep2], device 0: TWL4030 twl4030-0 []
>> Subdevices: 1/1
>> Subdevice #0: subdevice #0
>> Architecture: armel
>> ArecordDevices:
>> **** List of CAPTURE Hardware Devices ****
>> card 0: igep2 [igep2], device 0: TWL4030 twl4030-0 []
>> Subdevices: 1/1
>> Subdevice #0: subdevice #0
>> CurrentDmesg:
>>
>> Date: Thu Sep 23 02:16:35 2010
>> Lspci:
>> Error: command ['lspci', '-vvnn'] failed with exit code 1: pcilib: Cannot
>> open /proc/bus/pci
>> lspci: Cannot find any working access method.
>> Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> ProcCmdLine: mem=512M console=tty0 console=ttyS2,115200n8
>> root=/dev/mmcblk0p2 rw rootwait vram=12M omapfb.mode=dvi:1280x720mr...@60
>> ProcEnviron:
>> SHELL=/bin/bash
>> LANG=pt_PT.UTF-8
>> SourcePackage: linux
>>
>> To unsubscribe from this bug, go to:
>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/645689/+subscribe
>>
>
--
linux-omap cant bring up eth0 on igepv2 board, no network
https://bugs.launchpad.net/bugs/645689
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
