Tested on: ubu...@ubuntu:~$ uname -a Linux ubuntu 2.6.35-1008-linaro-omap #15-Ubuntu Fri Oct 22 11:56:29 UTC 2010 armv7l GNU/Linux
ubu...@ubuntu:/sys/class/leds$ ls /sys/class/leds/ gpio-led:green:d0 gpio-led:green:d1 gpio-led:red:d0 gpio-led:red:d1 r...@ubuntu:/sys/class/leds# echo 1 > gpio-led\:green\:d0/brightness r...@ubuntu:/sys/class/leds# echo 0 > gpio-led\:green\:d0/brightness r...@ubuntu:/sys/class/leds# echo 0 > gpio-led\:green\:d1/brightness r...@ubuntu:/sys/class/leds# echo 1 > gpio-led\:green\:d1/brightness r...@ubuntu:/sys/class/leds# echo 0 > gpio-led\:red\:d0/brightness r...@ubuntu:/sys/class/leds# echo 1 > gpio-led\:red\:d0/brightness r...@ubuntu:/sys/class/leds# echo 1 > gpio-led\:red\:d1/brightness r...@ubuntu:/sys/class/leds# echo 0 > gpio-led\:red\:d1/brightness 2010/11/8 Launchpad Bug Tracker <[email protected]>: > This bug was fixed in the package linux-linaro - 2.6.35-1008.15 > > --------------- > linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low > > [ Robert Nelson ] > > * SRU: Fix DVI for Beagle xM rev A3 > - LP: #663642 > > linux-linaro (2.6.35-1008.14) maverick-proposed; urgency=low > > [ Andy Whitcroft ] > > * reduce disk usage during buildd builds > - LP: #645653 > > [ Enric Balletbo i Serra ] > > * ARM: igepv2: Adding support for VBUS and overcurrent > - LP: #651589 > * ARM: igepv2: Fix and improve LED handling > - LP: #654582 > * ARM: igepv2: Introduce function to dectect HW version > - LP: #654586 > * ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo > - LP: #654590 > * ARM: igepv2: Add i2c eeprom driver to read EDID > - LP: #654594 > * ARM: igepv2: Remove VMMC2 regulator > - LP: #654595 > > [ Maurus Cuelenaere ] > > * SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board > - LP: #607250 > > [ Upstream Stable ] > * Linux 2.6.35.7 > > [ Upstream MMC updates ] > > * mmc: recognize CSD structure > * mmc: split mmc_sd_init_card() > * mmc: implement SD-combo (IO+mem) support > * sdhci: remove useless set_clock() check > * sdhci: 8-bit data transfer width support > * sdhci: don't assign mmc->caps at SDHCI directly > * mmc: only set blockaddressed for > 2GiB cards > * mmc: omap: fix for bus width which improves SD card's peformance. > * sdhci-pltfm: switch to module device table matching > * sdhci-pltfm: reorganize Makefile entries to support SoC devices > * sdhci-pltfm: add support for CNS3xxx SoC devices > * omap hsmmc: fix processing of all dma interrupts as block completion > * sdhci: add regulator support > * sdhci: add no hi-speed bit quirk support > * mmc: avoid getting CID on SDIO-only cards > * omap_hsmmc: remove unused local `state' > * omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend > * drivers/mmc/host/imxmmc.c: adjust confusing if indentation > * mmc: sdhci-pltfm: Add structure for host-specific data > * mmc: sdhci-pltfm: move .h file into appropriate subdir > * mmc: sdhci: introduce get_ro private write-protect hook > * mmc: sdhci_pltfm: pass more data on custom init call > * mmc: sdhci-of-esdhc: factor out common stuff > * mmc: sdhci-pltfm: add -pltfm driver for imx35/51 > * mmc: quirk fix for timeout problem > * babbage: esdhc device registration > * babbage: update mx51_defconfig > - LP: #656966 > > > [ Upstream ARM fixes ] > > * Make PTRACE_SINGLESTEP work with user helpers > * ARM: fix section mismatch warnings in Versatile Express > * ARM: use memblock to remove memory from available memory > * video: omap: vram: remove from normal memory > - LP: #627779 > > [ John Rigby ] > * LINARO: update configs > - LP: #659799 > > linux-linaro (2.6.35-1007.13) maverick; urgency=low > > [ Upstream Ubuntu ] > > * Ubuntu-2.6.35-22.33 > * Ubuntu-2.6.35-22.34 > > [ Upstream ARM Fixes ] > > * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile > * ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile > * ARM: add a vma entry for the user accessible vector page > * ARM: plug a race with the alignment trap handler > * arm: fix really nasty sigreturn bug > * ARM: prevent multiple syscall restarts > * ARM: 6387/1: errata: check primary part ID in proc-v7.S > * ARM: 6388/1: errata: DMB operation may be faulty > * ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to > data corruption > * ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM > * kconfig: delay symbol direct dependency initialization > * ARM: kprobes-decode: add support for MOVW instruction > * ARM: errata: check primary part ID in proc-v7.S > * ARM: errata: DMB operation may be faulty > * ARM: errata: incorrect hazard handling in the SCU may lead to data > corruption > * ARM: errata: faulty hazard checking in the Store Buffer may lead to > data corruption > * ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 > > [ Ricardo Salveti ] > * ARM: OMAP3: Add S-Video output to IGEPv2 board > - LP: #607250 > * ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board > - LP: #607250 > > [ Upstream Stable Releases ] > * 2.6.35.5 > * 2.6.35.6 > > [ Upstream ftrace support ] > > * ARM: 6312/1: ftrace: allow building without frame pointers > * ARM: 6314/1: ftrace: allow build without frame pointers on ARM > * ARM: 6315/1: ftrace: add ENDPROC annotations > * ARM: 6316/1: ftrace: add Thumb-2 support > * ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl > * ARM: 6318/1: ftrace: fix and update dynamic ftrace > * ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace > * ARM: 6320/1: ftrace: enable dynamic ftrace > > [ Nicolas Pitre ] > > * ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via > /dev/mem > * ARM: bring SECCOMP behavior in sync with the version in mainline > * ARM: do not define VMALLOC_END relative to PAGE_OFFSET > > [ John Rigby ] > > * LINARO: Start new release > * LINARO: Bump ABI > * LINARO: update configs > -- John Rigby <[email protected]> Thu, 21 Oct 2010 11:01:14 -0600 > > ** Changed in: linux-linaro (Ubuntu Maverick) > Status: Fix Committed => Fix Released > > -- > 4 LEDs on IGEPv2 board are not initialized/working > https://bugs.launchpad.net/bugs/654582 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux-linaro” package in Ubuntu: New > Status in “linux-linaro” source package in Maverick: Fix Released > > Bug description: > The LEDs on the IGEPv2 board are not working. > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/linux-linaro/+bug/654582/+subscribe > -- 4 LEDs on IGEPv2 board are not initialized/working https://bugs.launchpad.net/bugs/654582 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
