Ok for completeness I removed the tifm modules and switched over to the
sdhci module with
setpci -s 02:06.3 4c.b=0x02 (only for my laptop check lspci for yours)
inserting card gives
[ 8354.956000] mmcblk0: mmc2:0001 SDMMC 508800KiB
[ 8354.956000] mmcblk0: p1
fdisk -l
Disk /dev/sda: 60.0 GB, 60011642880 bytes
240 heads, 63 sectors/track, 7752 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 250 1889968+ 82 Linux swap / Solaris
/dev/sda2 251 7752 56715120 83 Linux
Disk /dev/mmcblk0: 521 MB, 521011200 bytes
9 heads, 24 sectors/track, 4711 cylinders
Units = cylinders of 216 * 512 = 110592 bytes
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2 4712 508685+ 6 FAT16
But Hal does not recognize card insertion at all ????
But Manual mounting works fine.
Conclusion Both the sdhci AND tifm modules work BUT
1 with tifm modules hal events function but no auto mount, manual mount works
2 with sdhci modules hal doesn't function, manual mount still works
Hopefully this will clear up the confusion with the two different
drivers and these bugs can be traced prior to feisty
so I think there are 2 bugs but need someone smarter than me to say
which package they are in.
--
tifm: Texas Instruments Card reader not working
https://bugs.launchpad.net/bugs/53923
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
