If cuurentdmesg.txt is a continuation of bootdmesg.txt, then it looks like sdb and sdc come up after the boot process gives up. Where are you installed to. I see you have the following on what appears to be an onboard sata: scsi 2:0:0:0: Direct-Access ATA ST3120026AS 8.05 PQ: 0 ANSI: 5
And then on the lsi card you have two of the following: scsi 6:0:0:0: Direct-Access SEAGATE ST3300657SS ES62 PQ: 0 ANSI: 5 If you're installed to the sata drive, you're drive came up ~3seconds so it should have been fine. The LSI ones came up ~34seconds which is a little long but not horrible. Could you describe what the two logs are from? What would be helpful is to have on that shows the boot process of a failed boot. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/611474 Title: Boot fails with busybox prompt using LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08) SAS Disk Controller -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
