** Summary changed:

- usb3 thumb drive only connected as usb2 device 
+ usb3 thumb drive only detected as usb2 device

** Description changed:

  Binary package hint: linux-image
  
  If I connect a ADATA N005 USB3 thumb drive to a ASUS motherboard (model
- M4A88TD-V EVO/USB3) the thumb drive is only connected as a USB2 device.
+ M4A88TD-V EVO/USB3) the thumb drive is only detected as a USB2 device.
  
  The USB3 host controller is a NEC uPD720200 USB 3.0 onboard chip (usb
  bus 8). The thumb drive is connected as "Port 2: Dev 5" (please see the
  "lsusb -t" output below) and not under "bus 8".
  
  Some output:
  #lsb_release -rd
  Description:  Ubuntu 10.10
  Release:      10.10
  
  #linux-image
  linux-image-2.6.35-25-generic, version 2.6.35-25.44
  
  #lsusb -t
  /:  Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
  /:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/4p, 12M
  /:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
  /:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/5p, 12M
  /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/5p, 12M
  /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/4p, 480M
  /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/5p, 480M
-     |__ Port 3: Dev 2, If 0, Class=stor., Driver=usb-storage, 480M
+     |__ Port 3: Dev 2, If 0, Class=stor., Driver=usb-storage, 480M
  /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/5p, 480M
-     |__ Port 2: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M
+     |__ Port 2: Dev 5, If 0, Class=stor., Driver=usb-storage, 480M
  
  #kern.log output while connecting USB3 thumb drive
  kernel: [ 2453.870091] usb 1-2: new high speed USB device using ehci_hcd and 
address 6
  kernel: [ 2454.027728] scsi13 : usb-storage 1-2:1.0
  
  #some more kern.log output
  kernel: [    4.059528] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 18 (level, 
low) -> IRQ 18
  kernel: [    4.059563] xhci_hcd 0000:03:00.0: setting latency timer to 64
  kernel: [    4.059565] xhci_hcd 0000:03:00.0: xHCI Host Controller
  kernel: [    4.059633] xhci_hcd 0000:03:00.0: new USB bus registered, 
assigned bus number 8
  kernel: [    4.059743] xhci_hcd 0000:03:00.0: irq 18, io mem 0xfebfa000
  kernel: [    4.060541] EDAC amd64_edac:  Ver: 3.3.0 Jan 21 2011
  kernel: [    4.063472] lp: driver loaded but no devices found
  kernel: [    4.072533] usb usb8: No SuperSpeed endpoint companion for config 
1  interface 0 alt
  setting 0 ep 129: using minimum values
  kernel: [    4.072640] xHCI xhci_add_endpoint called for root hub
  kernel: [    4.072642] xHCI xhci_check_bandwidth called for root hub
  kernel: [    4.072678] hub 8-0:1.0: USB hub found
  kernel: [    4.072681] hub 8-0:1.0: 4 ports detected
  kernel: [    4.072858] shpchp: Standard Hot Plug PCI Controller Driver 
version: 0.4
  
  ProblemType: Bug
  DistroRelease: Ubuntu 10.10
  Package: linux-image (not installed)
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.35-25.44-generic 2.6.35.10
  Uname: Linux 2.6.35-25-generic x86_64
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
  Architecture: amd64
  ArecordDevices:
-  **** List of CAPTURE Hardware Devices ****
-  card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
-    Subdevices: 1/1
-    Subdevice #0: subdevice #0
+  **** List of CAPTURE Hardware Devices ****
+  card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
+    Subdevices: 1/1
+    Subdevice #0: subdevice #0
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC0:  sp         2304 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC0:  sp         2304 F.... pulseaudio
  CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
  Card0.Amixer.info:
-  Card hw:0 'SB'/'HDA ATI SB at 0xfe7f4000 irq 16'
-    Mixer name : 'Realtek ALC892'
-    Components : 'HDA:10ec0892,1043841b,00100302'
-    Controls      : 32
-    Simple ctrls  : 18
+  Card hw:0 'SB'/'HDA ATI SB at 0xfe7f4000 irq 16'
+    Mixer name : 'Realtek ALC892'
+    Components : 'HDA:10ec0892,1043841b,00100302'
+    Controls      : 32
+    Simple ctrls  : 18
  Card1.Amixer.info:
-  Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfe9e8000 irq 19'
-    Mixer name : 'ATI RS690/780 HDMI'
-    Components : 'HDA:1002791a,00791a00,00100000'
-    Controls      : 4
-    Simple ctrls  : 1
+  Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfe9e8000 irq 19'
+    Mixer name : 'ATI RS690/780 HDMI'
+    Components : 'HDA:1002791a,00791a00,00100000'
+    Controls      : 4
+    Simple ctrls  : 1
  Card1.Amixer.values:
-  Simple mixer control 'IEC958',0
-    Capabilities: pswitch pswitch-joined penum
-    Playback channels: Mono
-    Mono: Playback [on]
+  Simple mixer control 'IEC958',0
+    Capabilities: pswitch pswitch-joined penum
+    Playback channels: Mono
+    Mono: Playback [on]
  Date: Sun Jan 30 13:58:55 2011
  EcryptfsInUse: Yes
  HibernationDevice: RESUME=UUID=d9e43095-112a-4ae7-a2a0-5f5b2f59a09b
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
  IwConfig:
-  lo        no wireless extensions.
-  
-  eth0      no wireless extensions.
-  
-  vboxnet0  no wireless extensions.
+  lo        no wireless extensions.
+ 
+  eth0      no wireless extensions.
+ 
+  vboxnet0  no wireless extensions.
  MachineType: System manufacturer System Product Name
  ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.35-25-generic 
root=UUID=5c5c08b3-d9d2-4349-b3f5-ef28b2fd1f1c ro quiet usernamelash
  ProcEnviron:
-  PATH=(custom, user)
-  LANG=de_DE.utf8
-  SHELL=/bin/bash
+  PATH=(custom, user)
+  LANG=de_DE.utf8
+  SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.38.3
  RfKill:
-  
+ 
  SourcePackage: linux
  dmi.bios.date: 09/08/2010
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1601
  dmi.board.asset.tag: To Be Filled By O.E.M.
  dmi.board.name: M4A88TD-V EVO/USB3
  dmi.board.vendor: ASUSTeK Computer INC.
  dmi.board.version: Rev X.0x
  dmi.chassis.asset.tag: Asset-1234567890
  dmi.chassis.type: 3
  dmi.chassis.vendor: Chassis Manufacture
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr1601:bd09/08/2010:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnM4A88TD-VEVO/USB3:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
  dmi.product.name: System Product Name
  dmi.product.version: System Version
  dmi.sys.vendor: System manufacturer

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/710153

Title:
  usb3 thumb drive only detected as usb2 device

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to