Hello. I got a Huawei E620 and using Natty '11.04', and I still got this issue :(
modem-manager[5728]: <info> [1296952772.346647] [mm-serial-port.c:702] mm_serial_port_open(): (ttyUSB0) opening serial port... modem-manager[5728]: <debug> [1296952772.349365] [mm-serial-port.c:764] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open) modem-manager[5728]: <debug> [1296952772.349644] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CPIN="1111"<CR>' modem-manager[5728]: <debug> [1296952772.444560] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952772.444750] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CPIN?<CR>' modem-manager[5728]: <debug> [1296952772.464425] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>+CPIN: READY<CR><LF><CR><LF>OK<CR><LF>' modem-manager[5728]: <info> [1296952772.464723] [mm-modem-base.c:299] mm_modem_base_set_unlock_required(): Modem /org/freedesktop/ModemManager/Modems/3: unlock no longer required modem-manager[5728]: <info> [1296952772.464991] [mm-modem-base.c:338] mm_modem_base_set_unlock_retries(): Modem /org/freedesktop/ModemManager/Modems/3: # unlock retries is 0 modem-manager[5728]: <debug> [1296952772.465645] [mm-serial-port.c:798] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close) modem-manager[5728]: <info> [1296952772.465867] [mm-serial-port.c:811] mm_serial_port_close(): (ttyUSB0) closing serial port... modem-manager[5728]: <info> [1296952772.467261] [mm-serial-port.c:834] mm_serial_port_close(): (ttyUSB0) serial port closed modem-manager[5728]: <info> [1296952772.468592] [mm-serial-port.c:702] mm_serial_port_open(): (ttyUSB0) opening serial port... modem-manager[5728]: <debug> [1296952772.471366] [mm-serial-port.c:764] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open) modem-manager[5728]: <info> [1296952772.471606] [mm-modem.c:761] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/3: state changed (disabled -> enabling) modem-manager[5728]: <debug> [1296952772.573247] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'ATZ E0 V1<CR>' modem-manager[5728]: <debug> [1296952772.604424] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952772.604639] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'ATE0<CR>' modem-manager[5728]: <debug> [1296952772.614445] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' As you can see it sends the PIN correctly, but it can't connect. Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.317720] [mm-generic-gsm.c:4250] simple_state_machine(): (ttyUSB0): simple connect state 0 Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.317913] [mm-generic-gsm.c:4250] simple_state_machine(): (ttyUSB0): simple connect state 2 Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.324422] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>+CGREG: 2,2,00,0<CR><LF><CR><LF>OK<CR><LF>' Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.324669] [mm-generic-gsm.c:2352] mm_generic_gsm_set_reg_status(): PS registration state changed: 2 Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.324934] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CREG?<CR>' Feb 6 01:49:22 laptop-jl modem-manager[5728]: <debug> [1296953362.344640] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>+CREG: 2,2,00,0<CR><LF><CR><LF>OK<CR><LF>' Feb 6 01:49:23 laptop-jl modem-manager[5728]: <debug> [1296953363.765634] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CREG?<CR>' Feb 6 01:49:23 laptop-jl modem-manager[5728]: <debug> [1296953363.784424] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>+CREG: 2,2,00,0<CR><LF><CR><LF>OK<CR><LF>' Feb 6 01:49:25 laptop-jl modem-manager[5728]: <debug> [1296953365.766741] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CREG?<CR>' Feb 6 01:49:28 laptop-jl modem-manager[5728]: <debug> [1296953368.991789] [mm-serial-port.c:798] mm_serial_port_close(): (ttyUSB0) device open count is 0 (close) Feb 6 01:49:28 laptop-jl modem-manager[5728]: <info> [1296953368.991859] [mm-serial-port.c:811] mm_serial_port_close(): (ttyUSB0) closing serial port... Feb 6 01:49:28 laptop-jl modem-manager[5728]: <info> [1296953368.991932] [mm-serial-port.c:834] mm_serial_port_close(): (ttyUSB0) serial port closed Then we use wvdial magic: --> WvDial: Internet dialer version 1.61 --> Cannot set information for serial port. --> Initializing modem. --> Sending: ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CPIN=1111 AT+CPIN=1111 OK --> Modem initialized. And guess what, it connects without issues: modem-manager[5728]: <info> [1296952925.235386] [mm-serial-port.c:702] mm_serial_port_open(): (ttyUSB0) opening serial port... modem-manager[5728]: <debug> [1296952925.237993] [mm-serial-port.c:764] mm_serial_port_open(): (ttyUSB0) device open count is 1 (open) modem-manager[5728]: <info> [1296952925.238210] [mm-modem.c:761] mm_modem_set_state(): Modem /org/freedesktop/ModemManager/Modems/5: state changed (disabled -> enabling) modem-manager[5728]: <debug> [1296952925.339739] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'ATZ E0 V1<CR>' modem-manager[5728]: <debug> [1296952925.350835] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- 'ATZ E0 V' modem-manager[5728]: <debug> [1296952925.354414] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '1<CR>' modem-manager[5728]: <debug> [1296952925.364423] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952925.364628] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'ATE0<CR>' modem-manager[5728]: <debug> [1296952925.374417] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952925.374623] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CMEE=1<CR>' modem-manager[5728]: <debug> [1296952925.394418] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952925.394611] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'ATX4 &C1<CR>' modem-manager[5728]: <debug> [1296952925.414409] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952925.414637] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): --> 'AT+CFUN=1<CR>' modem-manager[5728]: <debug> [1296952925.434526] [mm-at-serial-port.c:298] debug_log(): (ttyUSB0): <-- '<CR><LF>OK<CR><LF>' modem-manager[5728]: <debug> [1296952925.434744] [mm-serial-port.c:764] mm_serial_port_open(): (ttyUSB0) device open count is 2 (open) Maby it would be cool if this quite old bug gets fixed ? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/290177 Title: [huawei/option] NM 0.7: GSM connections won't work with PIN code protected modems - despite having supplied the correct PIN for the connection in nm-connection-editor -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
