@Aneesh
Thanks for looking into this. I can reproduce this bug on my A1 ES2.1 8-layer
750-2152-010(D) board. H ere are the details:
<snip>
$ for gpio in 171 101 182; do read gpio${gpio} <
/sys/class/gpio/gpio${gpio}/value; done && echo "Revision: ${gpio171}
${gpio101} ${gpio182}"
Revision: 0 1 1
$ sudo ./devmem2 0x4A002204
/dev/mem opened.
Memory mapped at address 0x40155000.
Value at address 0x4A002204 (0x40155204): 0x3B95C02F
</snip>
I'm using the following PSU:
http://search.digikey.com/scripts/DkSearch/dksus.dll?KeyWords=T951-P5P-ND
I've tried several linaro-n snapshots on this board - all showed the same
behavior. Also the alpha-2 doesn't work for me. These are the files used for
the image creation:
* linaro-natty-headless-tar-20110203-1.tar.gz
* hwpack_linaro-panda_20110203-0_armel_supported.tar.gz
I'm using l-m-c from lp:linaro-image-tools rev 287 with the qemu-kvm-
extras-static from Natty (0.13.0+noroms-0ubuntu11_i386.deb) on a i686
Maverick installation.
Please let me know if you need further details.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/708883
Title:
Panda board shuts down during boot
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
