> Add to your boot params: libata.force=noncq > It's not a guarantee to work, just helps quite a bit. Reading the comments above I dont see this helping much.
> > Also are you running in any sort of RAID configuration? Yes, I am. I have four disks attached to the controller; on each pair of disks two partitions are in a RAID 1. > I found a new PSU > helped a little as well, had very few incidents up until yesterday... I dont see a reason to assume this is related to the PSU. This very thread more or less proves this is a either a bug in linux kernel or in firmware/hardware. > I still blame Seagate drives as being part of the problem. I just checked and it turns out I do actually have two Seagate Barracuda 7200.10 disks (I thought I had only Samsung). And it is indeed one of those that is causing problems. This is interesting. > > On Thu, Mar 31, 2011 at 14:36, Vasco <[email protected]> wrote: > >> I can confirm this bug as well. I also have a Gigabyte mainbord with the >> SB700/800 chipset. I have no option to disable NCQ. >> >> System is running Ubuntu kernel 2.6.32-30-generic >> >> -- >> You received this bug notification because you are a direct subscriber >> of the bug. >> https://bugs.launchpad.net/bugs/550559 >> >> Title: >> hdd problems, failed command: READ FPDMA QUEUED >> >> Status in Ubuntu: >> Confirmed >> >> Bug description: >> Hello! >> >> I have a brand new computer. With a SSD device and a SATA hard drive, >> a Seagate Barracuda XT specifically 6Gb / s of 2TB. The latter is >> connected to a Marvell 9123 controller that I set AHCI mode in BIOS. >> >> I have the OS installed on the SSD device, but when you try to read >> the disc 2TB gives several bugs. >> >> I tried to change the disk to another controller and gives the same >> problem, I even removed the disk partition table, having the same >> fate. >> >> I checked the disc for flaws from Windows with hd tune and >> verification tool official record, and does not give me any errors. >> >> I have tested with kernel version 2.6.34-rc2 and it works properly >> with this disc. >> >> The errors given are the following: >> >> [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 >> frozen >> [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED >> [ 9.115556] ata9.00: cmd 60/04:00:d4:82:85/00:00:1f:00:00/40 tag 0 ncq >> 2048 in >> [ 9.115557] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 >> (timeout) >> [ 9.115560] ata9.00: status: { DRDY } >> [ 9.115562] ata9.00: failed command: READ FPDMA QUEUED >> [ 9.115568] ata9.00: cmd 60/01:08:d1:82:85/00:00:1f:00:00/40 tag 1 ncq >> 512 in >> [ 9.115569] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 >> (timeout) >> [ 9.115572] ata9.00: status: { DRDY } >> [ 9.115574] ata9.00: failed command: READ FPDMA QUEUED >> [ 9.115579] ata9.00: cmd 60/01:10:d2:82:85/00:00:1f:00:00/40 tag 2 ncq >> 512 in >> [ 9.115581] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 >> (timeout) >> [ 9.115583] ata9.00: status: { DRDY } >> [ 9.115586] ata9.00: failed command: READ FPDMA QUEUED >> [ 9.115591] ata9.00: cmd 60/01:18:d3:82:85/00:00:1f:00:00/40 tag 3 ncq >> 512 in >> [ 9.115592] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 >> (timeout) >> [ 9.115595] ata9.00: status: { DRDY } >> [ 9.115609] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK >> driverbyte=DRIVER_SENSE >> [ 9.115612] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] >> [descriptor] >> [ 9.115616] Descriptor sense data with sense descriptors (in hex): >> [ 9.115618] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> [ 9.115626] 1f 85 82 d3 >> [ 9.115629] sd 8:0:0:0: [sdb] Add. Sense: No additional sense >> information >> [ 9.115633] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d4 00 00 04 >> 00 >> [ 9.115640] end_request: I/O error, dev sdb, sector 528843476 >> [ 9.115643] __ratelimit: 18 callbacks suppressed >> [ 9.115646] Buffer I/O error on device sdb2, logical block 317299556 >> [ 9.115649] Buffer I/O error on device sdb2, logical block 317299557 >> [ 9.115652] Buffer I/O error on device sdb2, logical block 317299558 >> [ 9.115655] Buffer I/O error on device sdb2, logical block 317299559 >> [ 9.115671] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK >> driverbyte=DRIVER_SENSE >> [ 9.115674] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] >> [descriptor] >> [ 9.115678] Descriptor sense data with sense descriptors (in hex): >> [ 9.115679] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> [ 9.115687] 1f 85 82 d3 >> [ 9.115690] sd 8:0:0:0: [sdb] Add. Sense: No additional sense >> information >> [ 9.115693] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d1 00 00 01 >> 00 >> [ 9.115700] end_request: I/O error, dev sdb, sector 528843473 >> [ 9.115702] Buffer I/O error on device sdb2, logical block 317299553 >> [ 9.115707] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK >> driverbyte=DRIVER_SENSE >> [ 9.115710] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] >> [descriptor] >> [ 9.115714] Descriptor sense data with sense descriptors (in hex): >> [ 9.115716] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> [ 9.115723] 1f 85 82 d3 >> [ 9.115726] sd 8:0:0:0: [sdb] Add. Sense: No additional sense >> information >> [ 9.115729] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d2 00 00 01 >> 00 >> [ 9.115736] end_request: I/O error, dev sdb, sector 528843474 >> [ 9.115738] Buffer I/O error on device sdb2, logical block 317299554 >> [ 9.115743] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK >> driverbyte=DRIVER_SENSE >> [ 9.115746] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] >> [descriptor] >> [ 9.115749] Descriptor sense data with sense descriptors (in hex): >> [ 9.115751] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 >> [ 9.115759] 1f 85 82 d3 >> [ 9.115762] sd 8:0:0:0: [sdb] Add. Sense: No additional sense >> information >> [ 9.115765] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d3 00 00 01 >> 00 >> [ 9.115771] end_request: I/O error, dev sdb, sector 528843475 >> [ 9.115774] Buffer I/O error on device sdb2, logical block 317299555 >> [ 16.243531] sd 8:0:0:0: timing out command, waited 7s >> [ 23.241557] sd 8:0:0:0: timing out command, waited 7s >> >> >> lsb_release -rd >> Description: Ubuntu lucid (development branch) >> Release: 10.04 >> ignasi@ignasi-desktop:~$ >> >> ProblemType: Bug >> DistroRelease: Ubuntu 10.04 >> Package: yelp 2.29.5-0ubuntu3 >> ProcVersionSignature: Ubuntu 2.6.32-17.26-generic 2.6.32.10+drm33.1 >> Uname: Linux 2.6.32-17-generic x86_64 >> NonfreeKernelModules: nvidia >> Architecture: amd64 >> Date: Mon Mar 29 01:06:27 2010 >> ExecutablePath: /usr/bin/yelp >> InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100318) >> ProcEnviron: >> LANG=ca_ES.utf8 >> SHELL=/bin/bash >> SourcePackage: yelp >> >> To unsubscribe from this bug, go to: >> https://bugs.launchpad.net/ubuntu/+bug/550559/+subscribe >> > > -- > You received this bug notification because you are a direct subscriber > of the bug. > https://bugs.launchpad.net/bugs/550559 > > Title: > hdd problems, failed command: READ FPDMA QUEUED > > Status in Ubuntu: > Confirmed > > Bug description: > Hello! > > I have a brand new computer. With a SSD device and a SATA hard drive, > a Seagate Barracuda XT specifically 6Gb / s of 2TB. The latter is > connected to a Marvell 9123 controller that I set AHCI mode in BIOS. > > I have the OS installed on the SSD device, but when you try to read > the disc 2TB gives several bugs. > > I tried to change the disk to another controller and gives the same > problem, I even removed the disk partition table, having the same > fate. > > I checked the disc for flaws from Windows with hd tune and > verification tool official record, and does not give me any errors. > > I have tested with kernel version 2.6.34-rc2 and it works properly > with this disc. > > The errors given are the following: > > [ 9.115544] ata9: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x10 frozen > [ 9.115550] ata9.00: failed command: READ FPDMA QUEUED > [ 9.115556] ata9.00: cmd 60/04:00:d4:82:85/00:00:1f:00:00/40 tag 0 ncq > 2048 in > [ 9.115557] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 > (timeout) > [ 9.115560] ata9.00: status: { DRDY } > [ 9.115562] ata9.00: failed command: READ FPDMA QUEUED > [ 9.115568] ata9.00: cmd 60/01:08:d1:82:85/00:00:1f:00:00/40 tag 1 ncq > 512 in > [ 9.115569] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 > (timeout) > [ 9.115572] ata9.00: status: { DRDY } > [ 9.115574] ata9.00: failed command: READ FPDMA QUEUED > [ 9.115579] ata9.00: cmd 60/01:10:d2:82:85/00:00:1f:00:00/40 tag 2 ncq > 512 in > [ 9.115581] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 > (timeout) > [ 9.115583] ata9.00: status: { DRDY } > [ 9.115586] ata9.00: failed command: READ FPDMA QUEUED > [ 9.115591] ata9.00: cmd 60/01:18:d3:82:85/00:00:1f:00:00/40 tag 3 ncq > 512 in > [ 9.115592] res 40/00:18:d3:82:85/00:00:1f:00:00/40 Emask 0x4 > (timeout) > [ 9.115595] ata9.00: status: { DRDY } > [ 9.115609] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 9.115612] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] > [descriptor] > [ 9.115616] Descriptor sense data with sense descriptors (in hex): > [ 9.115618] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > [ 9.115626] 1f 85 82 d3 > [ 9.115629] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information > [ 9.115633] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d4 00 00 04 00 > [ 9.115640] end_request: I/O error, dev sdb, sector 528843476 > [ 9.115643] __ratelimit: 18 callbacks suppressed > [ 9.115646] Buffer I/O error on device sdb2, logical block 317299556 > [ 9.115649] Buffer I/O error on device sdb2, logical block 317299557 > [ 9.115652] Buffer I/O error on device sdb2, logical block 317299558 > [ 9.115655] Buffer I/O error on device sdb2, logical block 317299559 > [ 9.115671] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 9.115674] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] > [descriptor] > [ 9.115678] Descriptor sense data with sense descriptors (in hex): > [ 9.115679] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > [ 9.115687] 1f 85 82 d3 > [ 9.115690] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information > [ 9.115693] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d1 00 00 01 00 > [ 9.115700] end_request: I/O error, dev sdb, sector 528843473 > [ 9.115702] Buffer I/O error on device sdb2, logical block 317299553 > [ 9.115707] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 9.115710] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] > [descriptor] > [ 9.115714] Descriptor sense data with sense descriptors (in hex): > [ 9.115716] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > [ 9.115723] 1f 85 82 d3 > [ 9.115726] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information > [ 9.115729] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d2 00 00 01 00 > [ 9.115736] end_request: I/O error, dev sdb, sector 528843474 > [ 9.115738] Buffer I/O error on device sdb2, logical block 317299554 > [ 9.115743] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK > driverbyte=DRIVER_SENSE > [ 9.115746] sd 8:0:0:0: [sdb] Sense Key : Aborted Command [current] > [descriptor] > [ 9.115749] Descriptor sense data with sense descriptors (in hex): > [ 9.115751] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 > [ 9.115759] 1f 85 82 d3 > [ 9.115762] sd 8:0:0:0: [sdb] Add. Sense: No additional sense information > [ 9.115765] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 1f 85 82 d3 00 00 01 00 > [ 9.115771] end_request: I/O error, dev sdb, sector 528843475 > [ 9.115774] Buffer I/O error on device sdb2, logical block 317299555 > [ 16.243531] sd 8:0:0:0: timing out command, waited 7s > [ 23.241557] sd 8:0:0:0: timing out command, waited 7s > > > lsb_release -rd > Description: Ubuntu lucid (development branch) > Release: 10.04 > ignasi@ignasi-desktop:~$ > > ProblemType: Bug > DistroRelease: Ubuntu 10.04 > Package: yelp 2.29.5-0ubuntu3 > ProcVersionSignature: Ubuntu 2.6.32-17.26-generic 2.6.32.10+drm33.1 > Uname: Linux 2.6.32-17-generic x86_64 > NonfreeKernelModules: nvidia > Architecture: amd64 > Date: Mon Mar 29 01:06:27 2010 > ExecutablePath: /usr/bin/yelp > InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100318) > ProcEnviron: > LANG=ca_ES.utf8 > SHELL=/bin/bash > SourcePackage: yelp > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+bug/550559/+subscribe > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/550559 Title: hdd problems, failed command: READ FPDMA QUEUED -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
