Public bug reported:
Binary package hint: linux-image-2.6.38-7-generic
Following my upgrade from maverick to natty I discovered that my SATA
ExpressCard no longer works. Here's what shows up in dmesg when I plug
it in on maverick's kernel:
pciehp 0000:00:1c.3:pcie04: Card present on Slot(3)
pci 0000:05:00.0: reg 10: [mem 0x00000000-0x0000007f 64bit]
pci 0000:05:00.0: reg 18: [mem 0x00000000-0x00001fff 64bit]
pci 0000:05:00.0: reg 20: [io 0x0000-0x007f]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: BAR 2: assigned [mem 0xf0000000-0xf0001fff 64bit]
pci 0000:05:00.0: BAR 2: set to [mem 0xf0000000-0xf0001fff 64bit] (PCI
address [0xf0000000-0xf0001fff]
pci 0000:05:00.0: BAR 0: assigned [mem 0xf0002000-0xf000207f 64bit]
pci 0000:05:00.0: BAR 0: set to [mem 0xf0002000-0xf000207f 64bit] (PCI
address [0xf0002000-0xf000207f]
pci 0000:05:00.0: BAR 4: assigned [io 0x2000-0x207f]
pci 0000:05:00.0: BAR 4: set to [io 0x2000-0x207f] (PCI address
[0x2000-0x207f]
pcieport 0000:00:1c.3: PCI bridge to [bus 05-0c]
pcieport 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pcieport 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pcieport 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit
pref]
pcieport 0000:00:1c.3: setting latency timer to 64
pci 0000:05:00.0: no hotplug settings from platform
sata_sil24 0000:05:00.0: version 1.1
sata_sil24 0000:05:00.0: enabling device (0000 -> 0003)
sata_sil24 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sata_sil24 0000:05:00.0: setting latency timer to 64
scsi4 : sata_sil24
ata5: SATA max UDMA/100 host m128@0xf0002000 port 0xf0000000 irq 19
ata5: SATA link down (SStatus 0 SControl 0)
On natty's kernel nothing happens when I plug in the card, and when I
unplug it the system seems to freeze for a minute or so before
rebooting.
I encountered similar problems when running upstream 2.6.38.2, and
upstream 2.6.37 works fine.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/750042
Title:
inserting SATA expresscard has no effect, eject hangs the system
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
