Public bug reported:
I tryied it on all the usb ports. The device works ok on a Windows system.
Here is the log (maybe some first and the 2 last lines are not related):
[83447.558503] eth0: link down
[83533.426136] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[87293.192013] eth0: link down
[87309.659901] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[87542.168064] ipw2200: Failed to send ASSOCIATE: Command timed out.
[87543.896044] ipw2200: Failed to send SYSTEM_CONFIG: Command timed out.
[87545.444270] ipw2200: Failed to send ASSOCIATE: Command timed out.
[88773.981671] eth0: link down
[117819.328051] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[119531.172059] ipw2200: Failed to send ASSOCIATE: Command timed out.
[119576.840043] ipw2200: Failed to send ASSOCIATE: Command timed out.
[121057.208951] eth0: link down
[122508.652066] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[122550.869285] eth0: link down
[122603.736072] hub 1-0:1.0: unable to enumerate USB device on port 3
[122604.360111] hub 3-0:1.0: unable to enumerate USB device on port 1
[122605.412108] usb 3-1: new full speed USB device using uhci_hcd and address 3
[122606.344163] usb 3-1: USB disconnect, address 3
[122606.422978] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[122606.423054] usbcore: registered new interface driver rtl8150
[122606.584596] usb 3-1: new full speed USB device using uhci_hcd and address 4
[122606.783454] rtl8150 3-1:1.0: eth2: rtl8150 is detected
[122607.002204] net eth2: eth2: allmulti set
[122607.002227] net eth2: eth2: allmulti set
[122607.002361] net eth2: eth2: allmulti set
[122607.003104] net eth2: eth2: allmulti set
[122608.668431] net eth2: eth2: allmulti set
[122609.408909] net eth2: eth2: allmulti set
[122612.897234] usb 3-1: Rx status -75
[122612.898217] usb 3-1: Rx status -84
[122612.899220] usb 3-1: Rx status -84
[122612.900217] usb 3-1: Rx status -84
[122612.901217] usb 3-1: Rx status -84
[122612.902217] usb 3-1: Rx status -84
[122612.903222] usb 3-1: Rx status -84
[122612.904217] usb 3-1: Rx status -84
[122612.905219] usb 3-1: Rx status -84
[122612.906219] usb 3-1: Rx status -84
[122612.914236] usb 3-1: eth2: Tx status -71
[122613.057275] usb 3-1: eth2: intr status -84
[122613.104107] usb 3-1: USB disconnect, address 4
[122613.460121] usb 3-1: new full speed USB device using uhci_hcd and address 5
[122613.524107] hub 3-0:1.0: unable to enumerate USB device on port 1
[122616.124055] usb 3-1: new full speed USB device using uhci_hcd and address 6
[122616.244025] usb 3-1: device descriptor read/64, error -71
[122616.868048] usb 3-1: device not accepting address 6, error -71
[122616.924090] hub 3-0:1.0: unable to enumerate USB device on port 1
[122630.744060] usb 3-1: new full speed USB device using uhci_hcd and address 8
[122630.808098] hub 3-0:1.0: unable to enumerate USB device on port 1
[122631.760102] hub 1-0:1.0: unable to enumerate USB device on port 3
[122632.432093] hub 1-0:1.0: unable to enumerate USB device on port 3
[122634.440069] usb 3-1: new full speed USB device using uhci_hcd and address 9
[122634.634186] rtl8150 3-1:1.0: eth2: rtl8150 is detected
[122634.696645] net eth2: eth2: allmulti set
[122634.696661] net eth2: eth2: allmulti set
[122634.696692] net eth2: eth2: allmulti set
[122634.697075] net eth2: eth2: allmulti set
[122634.820701] read_bulk_callback: 199 callbacks suppressed
[122634.820715] usb 3-1: Rx status -75
[122634.821685] usb 3-1: Rx status -84
[122634.822687] usb 3-1: Rx status -84
[122634.823682] usb 3-1: Rx status -84
[122634.824684] usb 3-1: Rx status -84
[122634.825685] usb 3-1: Rx status -84
[122634.826681] usb 3-1: Rx status -84
[122634.827687] usb 3-1: Rx status -84
[122634.828684] usb 3-1: Rx status -84
[122634.829691] usb 3-1: Rx status -84
[122634.928116] usb 3-1: USB disconnect, address 9
[122654.264088] usb 4-1: new full speed USB device using uhci_hcd and address 2
[122654.457788] rtl8150 4-1:1.0: eth2: rtl8150 is detected
[122654.502504] read_bulk_callback: 100 callbacks suppressed
[122654.502511] usb 4-1: Rx status -84
[122654.503500] usb 4-1: Rx status -84
[122654.504501] usb 4-1: Rx status -84
[122654.505497] usb 4-1: Rx status -84
[122654.506497] usb 4-1: Rx status -84
[122654.507495] usb 4-1: Rx status -84
[122654.508498] usb 4-1: Rx status -84
[122654.509496] usb 4-1: Rx status -84
[122654.510502] usb 4-1: Rx status -84
[122654.511505] usb 4-1: Rx status -84
[122654.520075] usb 4-1: USB disconnect, address 2
[122654.520314] usb 4-1: device reset failed
[122654.520327] net eth2: eth2: allmulti set
[122654.520331] rtl8150: control request submission failed: -19
[122694.684070] usb 3-1: new full speed USB device using uhci_hcd and address 10
[122694.878745] rtl8150 3-1:1.0: eth2: rtl8150 is detected
[122694.939453] net eth2: eth2: allmulti set
[122694.939467] net eth2: eth2: allmulti set
[122694.939493] net eth2: eth2: allmulti set
[122694.939829] net eth2: eth2: allmulti set
[122696.932267] net eth2: eth2: allmulti set
[122697.381178] net eth2: eth2: allmulti set
[122701.085579] read_bulk_callback: 9 callbacks suppressed
[122701.085586] usb 3-1: Rx status -75
[122701.086568] usb 3-1: Rx status -84
[122701.086580] usb 3-1: eth2: Tx status -71
[122701.087570] usb 3-1: Rx status -84
[122701.087584] usb 3-1: eth2: Tx status -71
[122701.088566] usb 3-1: Rx status -84
[122701.088580] usb 3-1: eth2: Tx status -71
[122701.089570] usb 3-1: Rx status -84
[122701.090568] usb 3-1: Rx status -84
[122701.091572] usb 3-1: Rx status -84
[122701.092569] usb 3-1: Rx status -84
[122701.093569] usb 3-1: Rx status -84
[122701.094569] usb 3-1: Rx status -84
[122701.144114] usb 3-1: USB disconnect, address 10
[122703.356079] hub 1-0:1.0: unable to enumerate USB device on port 3
[122704.160092] hub 1-0:1.0: unable to enumerate USB device on port 3
[122736.564087] usb 3-1: new full speed USB device using uhci_hcd and address 11
[122736.628110] hub 3-0:1.0: unable to enumerate USB device on port 1
[122848.235832] ISO 9660 Extensions: Microsoft Joliet Level 3
[122848.273937] ISOFS: changing to secondary root
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: usbutils 0.87-4
Uname: Linux 2.6.35-02063511-generic i686
Architecture: i386
Date: Fri Apr 15 10:27:37 2011
EcryptfsInUse: Yes
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
ProcEnviron:
LANG=fr_FR.utf8
SHELL=/bin/bash
SourcePackage: usbutils
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: apport-bug i386 maverick
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/761508
Title:
Ethernet USB dongle rtl8150 does not work
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
