Nope its still the same Clock runing to fast and it gains 1 min on ervry minut now with or without NTP enabled..
I dont have a clue why it is like that... New Dmesg [ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000005fe90000 end: 000000005ff90000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000005ff90000 size: 000000000000e000 end: 000000005ff9e000 type: 3 [ 0.000000] copy_e820_map() start: 000000005ff9e000 size: 0000000000042000 end: 000000005ffe0000 type: 4 [ 0.000000] copy_e820_map() start: 000000005ffe0000 size: 0000000000020000 end: 0000000060000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff90000 (usable) [ 0.000000] BIOS-e820: 000000005ff90000 - 000000005ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000005ff9e000 - 000000005ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005ffe0000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 393104) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393104 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393104 [ 0.000000] On node 0 totalpages: 393104 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1279 pages used for memmap [ 0.000000] HighMem zone: 162449 pages, LIFO batch:31 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x000fa980 [ 0.000000] ACPI: XSDT (v001 KOZIRO FRONTIER 0x03000727 MSFT 0x00000097) @ 0x5ff90100 [ 0.000000] ACPI: FADT (v003 MSTEST OEMFACP 0x03000727 MSFT 0x00000097) @ 0x5ff90290 [ 0.000000] ACPI: MADT (v001 MSTEST OEMAPIC 0x03000727 MSFT 0x00000097) @ 0x5ff90390 [ 0.000000] ACPI: MCFG (v001 MSTEST OEMMCFG 0x03000727 MSFT 0x00000097) @ 0x5ff90400 [ 0.000000] ACPI: SLIC (v001 KOZIRO FRONTIER 0x03000727 MSFT 0x00000097) @ 0x5ff90440 [ 0.000000] ACPI: OEMB (v001 MSTEST AMI_OEM 0x03000727 MSFT 0x00000097) @ 0x5ff9e040 [ 0.000000] ACPI: HPET (v001 MSTEST OEMHPET 0x03000727 MSFT 0x00000097) @ 0x5ff99550 [ 0.000000] ACPI: DSDT (v001 A0545 A0545000 0x00000000 INTL 0x20060113) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ee00000) [ 0.000000] Detected 1868.255 MHz processor. [ 37.451789] Built 1 zonelists. Total pages: 390033 [ 37.451793] Kernel command line: root=UUID=3a7f829c-a6f2-47dd-9dab-1b522d678b22 ro quiet splash [ 37.451921] mapped APIC to ffffd000 (fee00000) [ 37.451923] mapped IOAPIC to ffffc000 (fec00000) [ 37.451926] Enabling fast FPU save and restore... done. [ 37.451928] Enabling unmasked SIMD FPU exception support... done. [ 37.451934] Initializing CPU#0 [ 37.451984] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 37.453157] Console: colour VGA+ 80x25 [ 37.453392] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 37.453652] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 37.498031] Memory: 1547600k/1572416k available (1992k kernel code, 23568k reserved, 893k data, 328k init, 654912k highmem) [ 37.498039] virtual kernel memory layout: [ 37.498040] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 37.498041] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 37.498042] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 37.498043] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 37.498044] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 37.498045] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB) [ 37.498046] .text : 0xc0100000 - 0xc02f2264 (1992 kB) [ 37.498049] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 37.498174] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 37.498179] hpet0: 3 64-bit timers, 14318180 Hz [ 37.499182] Using HPET for base-timer [ 37.578157] Calibrating delay using timer specific routine.. 3739.10 BogoMIPS (lpj=7478204) [ 37.578192] Security Framework v1.0.0 initialized [ 37.578199] SELinux: Disabled at boot. [ 37.578212] Mount-cache hash table entries: 512 [ 37.578335] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 37.578342] monitor/mwait feature present. [ 37.578344] using mwait in idle threads. [ 37.578348] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.578350] CPU: L2 cache: 2048K [ 37.578352] CPU: Physical Processor ID: 0 [ 37.578354] CPU: Processor Core ID: 0 [ 37.578355] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 37.578364] Compat vDSO mapped to ffffe000. [ 37.578368] Remapping vsyscall page to ffffe000 [ 37.578378] Checking 'hlt' instruction... OK. [ 37.594249] SMP alternatives: switching to UP code [ 37.594577] Early unpacking initramfs... done [ 37.874439] ACPI: Core revision 20060707 [ 37.874686] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 37.909545] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 37.909560] SMP alternatives: switching to SMP code [ 37.909619] Booting processor 1/1 eip 3000 [ 37.919986] Initializing CPU#1 [ 37.998055] Calibrating delay using timer specific routine.. 3736.41 BogoMIPS (lpj=7472832) [ 37.998061] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 [ 37.998065] monitor/mwait feature present. [ 37.998068] CPU: L1 I cache: 32K, L1 D cache: 32K [ 37.998070] CPU: L2 cache: 2048K [ 37.998072] CPU: Physical Processor ID: 0 [ 37.998073] CPU: Processor Core ID: 1 [ 37.998074] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 [ 37.998528] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 37.998544] Total of 2 processors activated (7475.51 BogoMIPS). [ 37.998684] ENABLING IO-APIC IRQs [ 37.998850] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 38.146022] checking TSC synchronization across 2 CPUs: passed. [ 0.003999] Brought up 2 CPUs [ 0.150386] migration_cost=64 [ 0.150615] Booting paravirtualized kernel on bare hardware [ 0.150679] Time: 14:35:53 Date: 03/18/107 [ 0.150702] NET: Registered protocol family 16 [ 0.150774] EISA bus registered [ 0.150778] ACPI: bus type pci registered [ 0.150903] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.150904] PCI: Using configuration type 1 [ 0.150906] Setting up standard PCI resources [ 0.166415] ACPI: Interpreter enabled [ 0.166418] ACPI: Using IOAPIC for interrupt routing [ 0.167064] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.167071] PCI: Probing PCI hardware (bus 00) [ 0.167815] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.167819] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.168008] Boot video device is 0000:01:00.0 [ 0.168582] PCI: Transparent bridge - 0000:00:1e.0 [ 0.168638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.189790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.190071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.194844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.195493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.195772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.198996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.199249] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.199499] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.199751] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.200015] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.200266] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.200516] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.200770] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.200874] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.200884] pnp: PnP ACPI init [ 0.205228] pnp: PnP ACPI: found 16 devices [ 0.205232] PnPBIOS: Disabled by ACPI PNP [ 0.205267] PCI: Using ACPI for IRQ routing [ 0.205269] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.216295] NET: Registered protocol family 8 [ 0.216297] NET: Registered protocol family 20 [ 0.216976] pnp: 00:08: ioport range 0x290-0x297 has been reserved [ 0.217238] PCI: Bridge: 0000:00:01.0 [ 0.217240] IO window: 8000-8fff [ 0.217243] MEM window: fa700000-fe7fffff [ 0.217246] PREFETCH window: bfe00000-dfdfffff [ 0.217250] PCI: Bridge: 0000:00:1c.0 [ 0.217251] IO window: disabled. [ 0.217254] MEM window: disabled. [ 0.217258] PREFETCH window: dfe00000-dfefffff [ 0.217262] PCI: Bridge: 0000:00:1c.3 [ 0.217264] IO window: a000-afff [ 0.217269] MEM window: fe900000-fe9fffff [ 0.217272] PREFETCH window: disabled. [ 0.217276] PCI: Bridge: 0000:00:1c.4 [ 0.217278] IO window: 9000-9fff [ 0.217282] MEM window: fe800000-fe8fffff [ 0.217285] PREFETCH window: disabled. [ 0.217290] PCI: Bridge: 0000:00:1e.0 [ 0.217292] IO window: b000-bfff [ 0.217296] MEM window: fea00000-feafffff [ 0.217300] PREFETCH window: 70000000-700fffff [ 0.217312] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.217317] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.217331] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.217336] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.217351] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 0.217355] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.217370] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.217374] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.217383] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.217404] NET: Registered protocol family 2 [ 0.267972] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.268056] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.268474] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.268700] TCP: Hash tables configured (established 131072 bind 65536) [ 0.268702] TCP reno registered [ 0.284030] checking if image is initramfs... it is [ 0.837286] Freeing initrd memory: 6747k freed [ 0.837831] audit: initializing netlink socket (disabled) [ 0.837845] audit(1176906953.540:1): initialized [ 0.837928] highmem bounce pool size: 64 pages [ 0.838000] VFS: Disk quotas dquot_6.5.1 [ 0.838017] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.838061] io scheduler noop registered [ 0.838063] io scheduler anticipatory registered [ 0.838065] io scheduler deadline registered [ 0.838074] io scheduler cfq registered (default) [ 0.993487] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.993517] assign_interrupt_mode Found MSI capability [ 0.993520] Allocate Port Service[0000:00:01.0:pcie00] [ 0.993592] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.993627] assign_interrupt_mode Found MSI capability [ 0.993629] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.993657] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.993736] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.993772] assign_interrupt_mode Found MSI capability [ 0.993774] Allocate Port Service[0000:00:1c.3:pcie00] [ 0.993800] Allocate Port Service[0000:00:1c.3:pcie02] [ 0.993880] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.993916] assign_interrupt_mode Found MSI capability [ 0.993918] Allocate Port Service[0000:00:1c.4:pcie00] [ 0.993944] Allocate Port Service[0000:00:1c.4:pcie02] [ 0.994074] isapnp: Scanning for PnP cards... [ 1.346896] isapnp: No Plug & Play device found [ 1.365016] Real Time Clock Driver v1.12ac [ 1.365163] hpet_resources: 0xfed00000 is busy [ 1.365183] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.365293] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.365782] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.365998] mice: PS/2 mouse device common for all mice [ 1.366485] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.366677] input: Macintosh mouse button emulation as /class/input/input0 [ 1.366707] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.366710] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.366876] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.366878] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 1.369497] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.369501] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.369601] EISA: Probing bus 0 at eisa.0 [ 1.369626] Cannot allocate resource for EISA slot 8 [ 1.369627] EISA: Detected 0 cards. [ 1.399768] TCP cubic registered [ 1.399776] NET: Registered protocol family 1 [ 1.399796] Starting balanced_irq [ 1.399801] Using IPI No-Shortcut mode [ 1.399891] ACPI: (supports S0 S1 S3 S4 S5) [ 1.399931] Magic number: 3:852:586 [ 1.399964] hash matches device ptyc4 [ 1.400150] Freeing unused kernel memory: 328k freed [ 1.403665] Time: tsc clocksource has been installed. [ 1.406504] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2.585658] Capability LSM initialized [ 2.620331] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] [ 2.620969] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] [ 2.621237] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 2.621243] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 2.912852] usbcore: registered new interface driver usbfs [ 2.912872] usbcore: registered new interface driver hub [ 2.912891] usbcore: registered new device driver usb [ 2.913585] USB Universal Host Controller Interface driver v3.0 [ 2.913620] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.913629] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 2.913633] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.913729] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.913754] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00 [ 2.913838] usb usb1: configuration #1 chosen from 1 choice [ 2.913858] hub 1-0:1.0: USB hub found [ 2.913863] hub 1-0:1.0: 2 ports detected [ 3.013419] SCSI subsystem initialized [ 3.017692] libata version 2.20 loaded. [ 3.019409] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 3.019419] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.019423] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.019444] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.019470] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e000 [ 3.019548] usb usb2: configuration #1 chosen from 1 choice [ 3.019571] hub 2-0:1.0: USB hub found [ 3.019576] hub 2-0:1.0: 2 ports detected [ 3.028111] Floppy drive(s): fd0 is 1.44M [ 3.050903] FDC 0 is a post-1991 82077 [ 3.127345] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.127354] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.127358] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.127380] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.127405] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000d480 [ 3.127480] usb usb3: configuration #1 chosen from 1 choice [ 3.127505] hub 3-0:1.0: USB hub found [ 3.127510] hub 3-0:1.0: 2 ports detected [ 3.235294] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 3.235302] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.235305] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.235325] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 3.235348] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d800 [ 3.235417] usb usb4: configuration #1 chosen from 1 choice [ 3.235440] hub 4-0:1.0: USB hub found [ 3.235445] hub 4-0:1.0: 2 ports detected [ 3.343248] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 3.343256] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.343259] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.343278] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 3.343301] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d880 [ 3.343371] usb usb5: configuration #1 chosen from 1 choice [ 3.343396] hub 5-0:1.0: USB hub found [ 3.343400] hub 5-0:1.0: 2 ports detected [ 3.451321] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20 [ 3.451332] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.451336] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.451550] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 3.451576] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.451581] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.451586] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfebffc00 [ 3.455473] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.455566] usb usb6: configuration #1 chosen from 1 choice [ 3.455593] hub 6-0:1.0: USB hub found [ 3.455598] hub 6-0:1.0: 4 ports detected [ 3.483160] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 3.563215] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.563229] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.563232] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.563254] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.563278] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.563284] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.563289] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebff800 [ 3.567172] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.567233] usb usb7: configuration #1 chosen from 1 choice [ 3.567258] hub 7-0:1.0: USB hub found [ 3.567263] hub 7-0:1.0: 6 ports detected [ 3.675196] pata_it821x: controller in pass through mode. [ 3.675199] r8169 Gigabit Ethernet driver 2.2LK loaded [ 3.675228] ACPI: PCI Interrupt 0000:03:00.0[A] -> <6>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 3.675233] GSI 19 (level, low) -> IRQ 17 [ 3.675249] PCI: Setting latency timer of device 0000:05:01.0 to 64 [ 3.675257] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 3.675293] ata1: PATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 21 [ 3.675317] ata2: PATA max UDMA/133 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 21 [ 3.675330] scsi0 : pata_it821x [ 3.675442] eth0: RTL8168b/8111b at 0xf8866000, 00:18:f3:08:02:8e, IRQ 17 [ 3.847967] ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480 [ 3.847970] ata1.00: ATA-6: HDS722580VLAT20, V32OA60A, max UDMA/100 [ 3.847972] ata1.00: 160836480 sectors, multi 0: LBA48 [ 3.859610] ata1.00: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480 [ 3.859612] ata1.00: configured for UDMA/100 [ 3.859617] scsi1 : pata_it821x [ 4.023017] usb 3-2: device not accepting address 2, error -71 [ 4.044411] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 4.044414] ata2.00: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100 [ 4.044416] ata2.00: 156301488 sectors, multi 0: LBA [ 4.044619] ata2.01: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 [ 4.044621] ata2.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133 [ 4.044623] ata2.01: 240121728 sectors, multi 0: LBA [ 4.056156] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488 [ 4.056158] ata2.00: configured for UDMA/100 [ 4.067437] ata2.01: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728 [ 4.067440] ata2.01: configured for UDMA/133 [ 4.067527] scsi 0:0:0:0: Direct-Access ATA HDS722580VLAT20 V32O PQ: 0 ANSI: 5 [ 4.067807] scsi 1:0:0:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5 [ 4.068058] scsi 1:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 [ 4.071090] PCI: Enabling device 0000:02:00.1 (0000 -> 0001) [ 4.071097] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 4.071117] PCI: Setting latency timer of device 0000:02:00.1 to 64 [ 4.072209] ata3: PATA max UDMA/100 cmd 0x00019c00 ctl 0x00019882 bmdma 0x00019400 irq 18 [ 4.072274] ata4: PATA max UDMA/100 cmd 0x00019800 ctl 0x00019482 bmdma 0x00019408 irq 18 [ 4.072285] scsi2 : pata_jmicron [ 4.088792] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.088809] sda: Write Protect is off [ 4.088811] sda: Mode Sense: 00 3a 00 00 [ 4.088824] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.088865] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.088872] sda: Write Protect is off [ 4.088874] sda: Mode Sense: 00 3a 00 00 [ 4.088886] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.088890] sda: sda1 [ 4.103424] sd 0:0:0:0: Attached scsi disk sda [ 4.103541] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 4.103549] sdb: Write Protect is off [ 4.103551] sdb: Mode Sense: 00 3a 00 00 [ 4.103563] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.103597] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) [ 4.103605] sdb: Write Protect is off [ 4.103606] sdb: Mode Sense: 00 3a 00 00 [ 4.103618] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.103621] sdb: sdb1 [ 4.126739] sd 1:0:0:0: Attached scsi disk sdb [ 4.126856] SCSI device sdc: 240121728 512-byte hdwr sectors (122942 MB) [ 4.126864] sdc: Write Protect is off [ 4.126866] sdc: Mode Sense: 00 3a 00 00 [ 4.126878] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.126907] SCSI device sdc: 240121728 512-byte hdwr sectors (122942 MB) [ 4.126914] sdc: Write Protect is off [ 4.126916] sdc: Mode Sense: 00 3a 00 00 [ 4.126928] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.126930] sdc: sdc1 [ 4.131839] sd 1:0:1:0: Attached scsi disk sdc [ 4.134965] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.134984] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.135004] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 4.403453] ata3.00: ATAPI, max UDMA/33 [ 4.575434] ata3.00: configured for UDMA/33 [ 4.575443] scsi3 : pata_jmicron [ 4.746259] ATA: abnormal status 0x7F on port 0x00019807 [ 4.747143] scsi 2:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16 PQ: 0 ANSI: 5 [ 4.747196] scsi 2:0:0:0: Attached scsi generic sg3 type 5 [ 4.747251] ata_piix 0000:00:1f.2: version 2.10ac1 [ 4.747256] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 4.747279] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 [ 4.747294] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 4.747321] ata5: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma 0x0001e400 irq 17 [ 4.747342] ata6: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma 0x0001e408 irq 17 [ 4.747349] scsi4 : ata_piix [ 4.755658] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 4.755661] Uniform CD-ROM driver Revision: 3.20 [ 4.755776] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.917454] ATA: abnormal status 0x7F on port 0x0001ec07 [ 4.917688] scsi5 : ata_piix [ 5.085410] ATA: abnormal status 0x7F on port 0x0001e807 [ 5.086580] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] [ 5.086600] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 17 [ 5.086614] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 5.086637] ata7: SATA max UDMA/133 cmd 0x0001d400 ctl 0x0001d082 bmdma 0x0001c880 irq 17 [ 5.086656] ata8: SATA max UDMA/133 cmd 0x0001d000 ctl 0x0001cc02 bmdma 0x0001c888 irq 17 [ 5.086662] scsi6 : ata_piix [ 5.158744] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 5.253342] ATA: abnormal status 0x7F on port 0x0001d407 [ 5.253350] scsi7 : ata_piix [ 5.340989] usb 4-1: configuration #1 chosen from 1 choice [ 5.422945] ata8.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 5.422950] ata8.00: ATA-7: SAMSUNG HD321KJ, CP100-06, max UDMA7 [ 5.422953] ata8.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 5.434934] ata8.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 5.434937] ata8.00: configured for UDMA/133 [ 5.435620] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 5.435679] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) [ 5.435689] sdd: Write Protect is off [ 5.435690] sdd: Mode Sense: 00 3a 00 00 [ 5.435703] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.435741] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) [ 5.435749] sdd: Write Protect is off [ 5.435750] sdd: Mode Sense: 00 3a 00 00 [ 5.435763] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.435765] sdd: sdd1 sdd2 < sdd5 > [ 5.461303] sd 7:0:0:0: Attached scsi disk sdd [ 5.461335] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 5.461941] ahci 0000:02:00.0: version 2.1 [ 5.461965] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 5.586648] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 5.624098] Attempting manual resume [ 5.624101] swsusp: Resume From Partition 8:53 [ 5.624102] PM: Checking swsusp image. [ 5.624242] PM: Resume from disk failed. [ 5.660492] kjournald starting. Commit interval 5 seconds [ 5.660497] EXT3-fs: mounted filesystem with ordered data mode. [ 5.851896] usb 4-2: configuration #1 chosen from 1 choice [ 5.856000] usbcore: registered new interface driver hiddev [ 6.098516] usb 3-2: new full speed USB device using uhci_hcd and address 4 [ 6.303828] usb 3-2: configuration #1 chosen from 1 choice [ 6.323801] input: Logitech USB Receiver as /class/input/input2 [ 6.323818] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1 [ 6.323830] usbcore: registered new interface driver usbhid [ 6.323833] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 6.466465] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 6.466474] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 6.466477] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 6.466540] ata9: SATA max UDMA/133 cmd 0xf8944100 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 6.466595] ata10: SATA max UDMA/133 cmd 0xf8944180 ctl 0x00000000 bmdma 0x00000000 irq 16 [ 6.466601] scsi8 : ahci [ 6.782356] ata9: SATA link down (SStatus 0 SControl 300) [ 6.782369] scsi9 : ahci [ 7.098278] ata10: SATA link down (SStatus 0 SControl 300) [ 12.444510] r8169: eth0: link up [ 12.444519] r8169: eth0: link up [ 13.393742] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.405934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.546418] iTCO_vendor_support: vendor-support=0 [ 13.553432] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 13.553522] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860) [ 13.553561] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.577959] Linux agpgart interface v0.102 (c) Dave Jones [ 13.669983] agpgart: Detected an Intel 965G Chipset. [ 13.683341] agpgart: AGP aperture is 256M @ 0x0 [ 13.728653] input: PC Speaker as /class/input/input3 [ 13.916933] parport: PnPBIOS parport detected. [ 13.917033] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 14.062287] Bluetooth: Core ver 2.11 [ 14.062340] NET: Registered protocol family 31 [ 14.062342] Bluetooth: HCI device and connection manager initialized [ 14.062345] Bluetooth: HCI socket layer initialized [ 14.071607] Bluetooth: HCI USB driver ver 2.9 [ 14.084502] Linux video capture interface: v2.00 [ 14.124225] usbcore: registered new interface driver hci_usb [ 14.275572] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX) [ 14.330641] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 [ 14.330655] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 14.417252] NET: Registered protocol family 10 [ 14.417330] lo: Disabled Privacy Extensions [ 14.638689] usbcore: registered new interface driver gspca [ 14.638693] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered [ 14.670711] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.05 [ 14.670749] usbcore: registered new interface driver zc0301 [ 14.828105] lp0: using parport0 (interrupt-driven). [ 14.874814] fuse init (API version 7.8) [ 14.903383] PCI: Enabling device 0000:00:1f.3 (0001 -> 0003) [ 14.903390] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20 [ 15.384688] Adding 4554388k swap on /dev/disk/by-uuid/e87b3180-c789-4cc9-912a-95f3f8b24723. Priority:-1 extents:1 across:4554388k [ 15.467404] EXT3 FS on sdd1, internal journal [ 15.604909] kjournald starting. Commit interval 5 seconds [ 15.605347] EXT3 FS on sdc1, internal journal [ 15.605351] EXT3-fs: mounted filesystem with ordered data mode. [ 16.953610] NET: Registered protocol family 17 [ 21.000355] input: Power Button (FF) as /class/input/input4 [ 21.000477] ACPI: Power Button (FF) [PWRF] [ 21.030919] input: Power Button (CM) as /class/input/input5 [ 21.030951] ACPI: Power Button (CM) [PWRB] [ 21.046953] Using specific hotkey driver [ 21.086959] No dock devices found. [ 21.121555] ibm_acpi: ec object not found [ 21.236082] pcc_acpi: loading... [ 24.749991] eth0: no IPv6 routers present [ 26.374662] ppdev: user-space parallel port driver [ 27.584103] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 27.584108] apm: disabled - APM is not SMP safe. [ 27.802840] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.919811] Netfilter messages via NETLINK v0.30. [ 27.933150] nf_conntrack version 0.5.0 (8192 buckets, 65536 max) [ 31.360406] Bluetooth: L2CAP ver 2.8 [ 31.360410] Bluetooth: L2CAP socket layer initialized [ 31.566637] Bluetooth: RFCOMM socket layer initialized [ 31.566646] Bluetooth: RFCOMM TTY layer initialized [ 31.566648] Bluetooth: RFCOMM ver 1.8 -- system Clock Time way to fast https://bugs.launchpad.net/bugs/107462 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
