Bcm43xx with belkin54g is buggy and all the people with my card suggest to use
bcmwl5.inf for best result, with Edgy I used bcmwl5.inf and it is perfect, so I
prefer bcmwl5.
I can install bcmwl5.inf in Feisty. (driver present, hardware present), but
the main problem is that I can't see eth1 when I remove bcm43xx, and I can't
load eth1 also I added "ndiswrapper" in "etc/modules" but it doesn't load
nothing.
This is a step by step about what I did (with "sudo"):
lsmod | grep bcm43xx
rmmod bcm43xx
sudo gedit /etc/modprobe.d/blacklist
I added : blacklist bcm43xx
ndiswrapper -i bcmwl5.inf
ndiswrapper -m
I edited "/etc/modprobe.d/ndiswrapper" with gedit, I deleted alias wlan0
ndiswrapper
I changed it in "alias eth1 ndiswrapper"
I edited "/etc/network/interfaces:"
auto eth1
iface eth1 inet static
address 192.168.2.2
gateway 192.168.2.1
netmask 255.255.255.0
network 192.168.2.0
wireless-essid belkin54g
wireless-channel 11
wireless-mode managed
sudo iwlist eth1 scan (I can't do this 'cause eht1 is not present) (IN
FEISTY FAWN I CAN'T CONTINUE THIS TUTORIAL, IN EDGY 6.10 IT WORKS)
eth1 Scan completed :
Cell 01 - Address: 00:11:50:41:A5:69
ESSID:"belkin54g"
Protocol:IEEE 802.11b
Mode:Managed
Frequency:2.462 GHz (Channel 11)
Quality:0/100 Signal level:-52 dBm Noise level:-256 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:bcn_int=100
Extra:atim=0
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
iwconfig eth1 mode managed channel 11 essid belkin54g
Andare su System/Ammin./Network
configuration has to be:
Network Name (ESSID): belkin54g
Password Type: Hexadecimal
Network password: password
Connection settings
Configuration: Static IP address
IP address: 192.168.2.2
Subnet mask: 255.255.255.0
Gateway address: 192.168.2.1
Add DNS
62.211.69.150
212.48.4.15
Make file "/etc/wpa_supplicant.conf" and add:
network={
ssid="belkin54g"
psk="password"
key_mgmt=WPA-PSK
proto=WPA
}
Then
ifconfig eth1 up
sudo wpa_supplicant -Dwext -ieth1 -c /etc/wpa_supplicant.conf -dd -B
In edgy this worked, In feisty It doesn't :/
PLS help!
--
belkin wireless card eth1 disappear if I install bcmwl5.inf driver
https://bugs.launchpad.net/bugs/108352
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
