Public bug reported:
Ubuntu 11.04, i386. Notebook HP NC6000 with Pentium M @1700MHz
I observe that Broadcom Corporation NetXtreme Ethernet adapter is not
reliable under heavy load. When I copy data to my notebook it is OK (but
I am not sure, maybe I am just lucky...). When I try to upload data from
my notebook to the server in LAN, I observe that network hands after few
seconds. I have to unplug and plug network cable to fix the problem but
it is a fix for several seconds and communication hangs again in a
minute. I found it is better for me to use external USB network adapter
that is slower than fast on board NetXtreme adaptor that hangs...
Details about HW:
Kernel module for Broadcom NetXtreme is tg3.
# lsmod | grep tg3
tg3 131476 0
# lspci | grep Ethernet
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit
Ethernet (rev 03)
# lspci | grep Ethernet
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit
Ethernet (rev 03)
# lspci -n | grep 0e
02:0e.0 0200: 14e4:165e (rev 03)
# ethtool eth2
Settings for eth2:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
drv probe link timer ifdown ifup rx_err tx_err
Link detected: yes
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/784460
Title:
Broadcom Corporation NetXtreme Ethernet adaptor is not reliable
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
