Public bug reported:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-28-generic (buildd@rothera) (gcc version
4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #50-Ubuntu SMP Fri Mar 18 19:00:26 UTC
2011 (Ubuntu 2.6.35-28.50-generic 2.6.35.11)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:
non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] modified: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] modified: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f4920] f4920
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 2f52d000 - 2ff74000
[ 0.000000] ACPI: RSDP 000f8840 00014 (v00 HP-CPC)
[ 0.000000] ACPI: RSDT 3fef3040 00038 (v01 HP-CPC AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: FACP 3fef30c0 00084 (v02 HP-CPC AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: DSDT 3fef31c0 03A8F (v01 HP-CPC AWRDACPI 00001000 MSFT
0100000E)
[ 0.000000] ACPI: FACS 3fef0000 00040
[ 0.000000] ACPI: SSDT 3fef6d80 00188 (v01 HP-CPC POWERNOW 00000001 LTP
00000001)
[ 0.000000] ACPI: SRAT 3fef6f80 000A0 (v01 HP-CPC HAMMER 00000001 AMD
00000001)
[ 0.000000] ACPI: MCFG 3fef7080 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: APIC 3fef6cc0 00068 (v01 HP-CPC AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fef0
[ 0.000000] On node 0 totalpages: 261759
[ 0.000000] free_area_init_node: node 0, pgdat c0801fc0, node_mem_map
c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 270 pages used for memmap
[ 0.000000] HighMem zone: 34276 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x11
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap:
3ff00000:a0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 259713
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic
root=UUID=19f7c337-55ab-4407-b1ae-09539a119467 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5237120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Subtract (46 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a4adc] TEXT DATA BSS
[ 0.000000] #3 [002f52d000 - 002ff74000] RAMDISK
[ 0.000000] #4 [00009a5000 - 00009a82c4] BRK
[ 0.000000] #5 [00000f4930 - 0000100000] BIOS reserved
[ 0.000000] #6 [00000f4920 - 00000f4930] MP-table mpf
[ 0.000000] #7 [000009f400 - 00000f2914] BIOS reserved
[ 0.000000] #8 [00000f2a30 - 00000f4920] BIOS reserved
[ 0.000000] #9 [00000f2914 - 00000f2a30] MP-table mpc
[ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #14 [0001001000 - 0001801000] BOOTMEM
[ 0.000000] #15 [0001801000 - 0001801004] BOOTMEM
[ 0.000000] #16 [0001801040 - 0001801100] BOOTMEM
[ 0.000000] #17 [0001801100 - 0001801154] BOOTMEM
[ 0.000000] #18 [0001801180 - 0001804180] BOOTMEM
[ 0.000000] #19 [0001804180 - 0001804190] BOOTMEM
[ 0.000000] #20 [00018041c0 - 0001804dc0] BOOTMEM
[ 0.000000] #21 [0001804dc0 - 0001804de7] BOOTMEM
[ 0.000000] #22 [0001804e00 - 0001804efc] BOOTMEM
[ 0.000000] #23 [0001804f00 - 0001804f40] BOOTMEM
[ 0.000000] #24 [0001804f40 - 0001804f80] BOOTMEM
[ 0.000000] #25 [0001804f80 - 0001804fc0] BOOTMEM
[ 0.000000] #26 [0001804fc0 - 0001805000] BOOTMEM
[ 0.000000] #27 [0001805000 - 0001805040] BOOTMEM
[ 0.000000] #28 [0001805040 - 0001805080] BOOTMEM
[ 0.000000] #29 [0001805080 - 00018050c0] BOOTMEM
[ 0.000000] #30 [00018050c0 - 0001805100] BOOTMEM
[ 0.000000] #31 [0001805100 - 0001805110] BOOTMEM
[ 0.000000] #32 [0001805140 - 00018051aa] BOOTMEM
[ 0.000000] #33 [00018051c0 - 000180522a] BOOTMEM
[ 0.000000] #34 [0001c00000 - 0001c0e000] BOOTMEM
[ 0.000000] #35 [0001e00000 - 0001e0e000] BOOTMEM
[ 0.000000] #36 [0001807240 - 0001807244] BOOTMEM
[ 0.000000] #37 [0001807280 - 0001807284] BOOTMEM
[ 0.000000] #38 [00018072c0 - 00018072c8] BOOTMEM
[ 0.000000] #39 [0001807300 - 0001807308] BOOTMEM
[ 0.000000] #40 [0001807340 - 00018073e8] BOOTMEM
[ 0.000000] #41 [0001807400 - 0001807468] BOOTMEM
[ 0.000000] #42 [0001807480 - 000180b480] BOOTMEM
[ 0.000000] #43 [000180b480 - 000188b480] BOOTMEM
[ 0.000000] #44 [000188b480 - 00018cb480] BOOTMEM
[ 0.000000] #45 [0001e0e000 - 000230c980] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fef0)
[ 0.000000] Memory: 1013388k/1047488k available (4936k kernel code, 33648k
reserved, 2337k data, 688k init, 138184k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB)
[ 0.000000] .data : 0xc05d20ae - 0xc081a7a8 (2337 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d20ae (4936 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1989.867 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3979.73 BogoMIPS (lpj=7959468)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004037] Security Framework initialized
[ 0.004065] AppArmor: AppArmor initialized
[ 0.004068] Yama: becoming mindful.
[ 0.004141] Mount-cache hash table entries: 512
[ 0.004302] Initializing cgroup subsys ns
[ 0.004307] Initializing cgroup subsys cpuacct
[ 0.004313] Initializing cgroup subsys memory
[ 0.004325] Initializing cgroup subsys devices
[ 0.004328] Initializing cgroup subsys freezer
[ 0.004332] Initializing cgroup subsys net_cls
[ 0.004362] CPU: Physical Processor ID: 0
[ 0.004365] CPU: Processor Core ID: 0
[ 0.004369] mce: CPU supports 5 MCE banks
[ 0.004387] Performance Events: AMD PMU driver.
[ 0.004396] ... version: 0
[ 0.004399] ... bit width: 48
[ 0.004402] ... generic registers: 4
[ 0.004405] ... value mask: 0000ffffffffffff
[ 0.004408] ... max period: 00007fffffffffff
[ 0.004411] ... fixed-purpose events: 0
[ 0.004414] ... event mask: 000000000000000f
[ 0.009132] ACPI: Core revision 20100428
[ 0.016029] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.016041] ftrace: allocating 21762 entries in 43 pages
[ 0.020091] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020453] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.061878] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 0.064000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.148088] Brought up 2 CPUs
[ 0.148092] Total of 2 processors activated (7959.56 BogoMIPS).
[ 0.148314] devtmpfs: initialized
[ 0.149067] regulator: core version 0.5
[ 0.149103] Time: 20:18:13 Date: 05/22/11
[ 0.149152] NET: Registered protocol family 16
[ 0.149293] EISA bus registered
[ 0.149299] node 0 link 0: io port [d000, ffff]
[ 0.149303] TOM: 0000000040000000 aka 1024M
[ 0.149307] node 0 link 0: mmio [a0000, bffff]
[ 0.149311] node 0 link 0: mmio [40000000, dfffffff]
[ 0.149315] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.149319] node 0 link 0: mmio [e0000000, e02fffff]
[ 0.149323] bus: [00, 02] on node 0 link 0
[ 0.149326] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.149329] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.149331] bus: 00 index 2 [mem 0x40000000-0xefffffff]
[ 0.149334] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.149342] ACPI: bus type pci registered
[ 0.149420] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.149425] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.149427] PCI: Using MMCONFIG for extended config space
[ 0.149429] PCI: Using configuration type 1 for base access
[ 0.150483] Trying to unpack rootfs image as initramfs...
[ 0.150483] bio: create slab <bio-0> at 0
[ 0.152190] ACPI: EC: Look up EC in DSDT
[ 0.156133] ACPI: Interpreter enabled
[ 0.156137] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.156161] ACPI: Using IOAPIC for interrupt routing
[ 0.160183] ACPI: No dock devices found.
[ 0.160187] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.160299] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.160508] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
(ignored)
[ 0.160511] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
(ignored)
[ 0.160514] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.160517] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff] (ignored)
[ 0.160521] pci_root PNP0A03:00: host bridge window [mem
0x40000000-0xfebfffff] (ignored)
[ 0.160542] pci 0000:00:00.0: reg 18: [io 0x4100-0x411f]
[ 0.160548] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.160595] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.160598] pci 0000:00:02.0: PME# disabled
[ 0.160666] pci 0000:00:12.0: reg 10: [io 0xfe00-0xfe07]
[ 0.160675] pci 0000:00:12.0: reg 14: [io 0xfd00-0xfd03]
[ 0.160684] pci 0000:00:12.0: reg 18: [io 0xfc00-0xfc07]
[ 0.160692] pci 0000:00:12.0: reg 1c: [io 0xfb00-0xfb03]
[ 0.160701] pci 0000:00:12.0: reg 20: [io 0xfa00-0xfa0f]
[ 0.160710] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f1ff]
[ 0.160719] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.160752] pci 0000:00:12.0: supports D1 D2
[ 0.160795] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.160894] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.160999] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.161067] pci 0000:00:13.2: supports D1 D2
[ 0.161070] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.161076] pci 0000:00:13.2: PME# disabled
[ 0.161123] pci 0000:00:14.0: reg 10: [io 0x0400-0x040f]
[ 0.161132] pci 0000:00:14.0: reg 14: [mem 0xfe02b000-0xfe02b3ff]
[ 0.161168] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.161225] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.161234] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.161243] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.161251] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.161260] pci 0000:00:14.1: reg 20: [io 0xf800-0xf80f]
[ 0.161442] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02a0ff]
[ 0.161601] PCI: peer root bus 00 res updated from pci conf
[ 0.161646] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf7ffffff]
[ 0.161656] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.161665] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfaffffff 64bit]
[ 0.161674] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.161705] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.161713] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.161718] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.161722] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.161727] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.161767] pci 0000:02:00.0: reg 10: [mem 0xfdeff000-0xfdeff1ff]
[ 0.161867] pci 0000:02:03.0: reg 10: [io 0xdf00-0xdfff]
[ 0.161878] pci 0000:02:03.0: reg 14: [mem 0xfdefe000-0xfdefe0ff]
[ 0.161919] pci 0000:02:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.161950] pci 0000:02:03.0: supports D1 D2
[ 0.161952] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
[ 0.161959] pci 0000:02:03.0: PME# disabled
[ 0.162007] pci 0000:02:04.0: reg 10: [mem 0xfdefd000-0xfdefd7ff]
[ 0.162018] pci 0000:02:04.0: reg 14: [io 0xde00-0xde7f]
[ 0.162089] pci 0000:02:04.0: supports D2
[ 0.162092] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.162098] pci 0000:02:04.0: PME# disabled
[ 0.162162] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.162171] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.162177] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.162183] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff
pref]
[ 0.162187] pci 0000:00:14.4: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.162190] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.162193] pci 0000:00:14.4: bridge window [mem 0x40000000-0xefffffff]
(subtractive decode)
[ 0.162197] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff]
(subtractive decode)
[ 0.162210] pci_bus 0000:00: on NUMA node 0
[ 0.162214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.177034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.177123] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.177211] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.177299] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.177386] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
[ 0.177474] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11)
[ 0.177561] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
[ 0.177647] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0,
disabled.
[ 0.177688] HEST: Table is not found!
[ 0.177786] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.177790] vgaarb: loaded
[ 0.177974] SCSI subsystem initialized
[ 0.184226] libata version 3.00 loaded.
[ 0.184226] usbcore: registered new interface driver usbfs
[ 0.184226] usbcore: registered new interface driver hub
[ 0.184226] usbcore: registered new device driver usb
[ 0.184299] ACPI: WMI: Mapper loaded
[ 0.184301] PCI: Using ACPI for IRQ routing
[ 0.184304] PCI: pci_cache_line_size set to 64 bytes
[ 0.184313] pci 0000:00:00.0: no compatible bridge window for [mem
0xe0000000-0xffffffff 64bit]
[ 0.184392] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.184396] reserve RAM buffer: 000000003fef0000 - 000000003fffffff
[ 0.184512] NetLabel: Initializing
[ 0.184514] NetLabel: domain hash size = 128
[ 0.184516] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.184531] NetLabel: unlabeled traffic allowed by default
[ 0.195303] AppArmor: AppArmor Filesystem Enabled
[ 0.195324] pnp: PnP ACPI init
[ 0.195344] ACPI: bus type pnp registered
[ 0.195948] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because
it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.195959] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled]
because it overlaps 0000:00:12.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.195969] pnp 00:01: disabling [io 0x040b] because it overlaps
0000:00:14.0 BAR 0 [io 0x0400-0x040f]
[ 0.195989] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled]
because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.196015] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled]
because it overlaps 0000:02:03.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
[ 0.197971] pnp 00:0b: disabling [mem 0x000cf000-0x000cffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.197976] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.197980] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.197985] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.197990] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.197994] pnp 00:0b: disabling [mem 0x00100000-0x3feeffff] because it
overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.198056] pnp: PnP ACPI: found 12 devices
[ 0.198058] ACPI: ACPI bus type pnp unregistered
[ 0.198062] PnPBIOS: Disabled by ACPI PNP
[ 0.198075] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.198078] system 00:01: [io 0x04d6] has been reserved
[ 0.198081] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.198084] system 00:01: [io 0x0c14] has been reserved
[ 0.198087] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.198090] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.198094] system 00:01: [io 0x0c6f] has been reserved
[ 0.198097] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.198100] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.198103] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.198108] system 00:01: [mem 0xfee00400-0xfee00fff window] has been
reserved
[ 0.198115] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.198118] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.198124] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.198130] system 00:0b: [mem 0x3ff00000-0x3fffffff] could not be reserved
[ 0.198134] system 00:0b: [mem 0x3fef0000-0x3fefffff] could not be reserved
[ 0.198137] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.198141] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.198145] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.198148] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.234249] Switching to clocksource acpi_pm
[ 0.234312] pci 0000:00:12.0: BAR 6: assigned [mem 0x40000000-0x4007ffff
pref]
[ 0.234316] pci 0000:01:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff
pref]
[ 0.234320] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.234323] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.234327] pci 0000:00:02.0: bridge window [mem 0xf4000000-0xfbffffff]
[ 0.234331] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 0.234337] pci 0000:02:03.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff
pref]
[ 0.234339] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.234344] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.234351] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.234357] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff
pref]
[ 0.234372] pci 0000:00:02.0: setting latency timer to 64
[ 0.234382] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.234384] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.234387] pci_bus 0000:00: resource 6 [mem 0x40000000-0xefffffff]
[ 0.234390] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.234393] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.234396] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbffffff]
[ 0.234399] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.234402] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.234405] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.234408] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.234411] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.234414] pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.234417] pci_bus 0000:02: resource 6 [mem 0x40000000-0xefffffff]
[ 0.234420] pci_bus 0000:02: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.234463] NET: Registered protocol family 2
[ 0.234533] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.234835] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.235591] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.235996] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.235996] TCP reno registered
[ 0.235996] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235996] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.235996] NET: Registered protocol family 1
[ 0.235996] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.235996] pci 0000:01:00.0: Boot video device
[ 0.235996] PCI: CLS 32 bytes, default 64
[ 0.235996] cpufreq-nforce2: No nForce2 chipset.
[ 0.235996] Scanning for low memory corruption every 60 seconds
[ 0.235996] audit: initializing netlink socket (disabled)
[ 0.235996] type=2000 audit(1306095493.232:1): initialized
[ 0.245899] highmem bounce pool size: 64 pages
[ 0.245905] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.247371] VFS: Disk quotas dquot_6.5.2
[ 0.247440] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.248040] fuse init (API version 7.14)
[ 0.248129] msgmni has been set to 1709
[ 0.458617] Freeing initrd memory: 10524k freed
[ 0.468520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.468525] io scheduler noop registered
[ 0.468527] io scheduler deadline registered
[ 0.468544] io scheduler cfq registered (default)
[ 0.468660] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.468738] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.468767] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.468973] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.468979] ACPI: Power Button [PWRB]
[ 0.469040] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.469044] ACPI: Power Button [PWRF]
[ 0.469231] ACPI: acpi_idle registered with cpuidle
[ 0.471104] ERST: Table is not found!
[ 0.471132] isapnp: Scanning for PnP cards...
[ 0.471266] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.472812] brd: module loaded
[ 0.473397] loop: module loaded
[ 0.473646] alloc irq_desc for 22 on node -1
[ 0.473649] alloc kstat_irqs on node -1
[ 0.473658] pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 0.473717] alloc irq_desc for 16 on node -1
[ 0.473719] alloc kstat_irqs on node -1
[ 0.473724] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 0.474100] Fixed MDIO Bus: probed
[ 0.474138] PPP generic driver version 2.4.2
[ 0.474176] tun: Universal TUN/TAP device driver, 1.6
[ 0.474179] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 0.474270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.474288] alloc irq_desc for 19 on node -1
[ 0.474290] alloc kstat_irqs on node -1
[ 0.474295] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.474316] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.474351] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 1
[ 0.474415] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
[ 0.485022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.485164] hub 1-0:1.0: USB hub found
[ 0.485170] hub 1-0:1.0: 8 ports detected
[ 0.485265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.485279] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.485290] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.485326] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 2
[ 0.485343] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
[ 0.545103] hub 2-0:1.0: USB hub found
[ 0.545112] hub 2-0:1.0: 4 ports detected
[ 0.545186] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.545196] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.545231] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 3
[ 0.545246] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
[ 0.605101] hub 3-0:1.0: USB hub found
[ 0.605109] hub 3-0:1.0: 4 ports detected
[ 0.605179] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.605264] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 0.608479] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.608486] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.608594] mice: PS/2 mouse device common for all mice
[ 0.608731] rtc_cmos 00:03: RTC can wake from S4
[ 0.608770] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.608799] rtc0: alarms up to one month, 242 bytes nvram
[ 0.608904] device-mapper: uevent: version 1.0.3
[ 0.609046] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-de...@redhat.com
[ 0.609120] device-mapper: multipath: version 1.1.1 loaded
[ 0.609123] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.609241] EISA: Probing bus 0 at eisa.0
[ 0.609246] EISA: Cannot allocate resource for mainboard
[ 0.609249] Cannot allocate resource for EISA slot 1
[ 0.609251] Cannot allocate resource for EISA slot 2
[ 0.609254] Cannot allocate resource for EISA slot 3
[ 0.609256] Cannot allocate resource for EISA slot 4
[ 0.609259] Cannot allocate resource for EISA slot 5
[ 0.609261] Cannot allocate resource for EISA slot 6
[ 0.609264] Cannot allocate resource for EISA slot 7
[ 0.609266] Cannot allocate resource for EISA slot 8
[ 0.609268] EISA: Detected 0 cards.
[ 0.609348] cpuidle: using governor ladder
[ 0.609350] cpuidle: using governor menu
[ 0.609718] TCP cubic registered
[ 0.609850] NET: Registered protocol family 10
[ 0.610258] lo: Disabled Privacy Extensions
[ 0.610529] NET: Registered protocol family 17
[ 0.610563] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor
3800+ (2 cpu cores) (version 2.20.00)
[ 0.610610] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
[ 0.610612] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
[ 0.610615] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 0.637848] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 0.651245] Using IPI No-Shortcut mode
[ 0.651352] PM: Resume from disk failed.
[ 0.651365] registered taskstats version 1
[ 0.651594] Magic number: 11:41:347
[ 0.651639] pci0000:00: hash matches
[ 0.651693] rtc_cmos 00:03: setting system clock to 2011-05-22 20:18:14 UTC
(1306095494)
[ 0.651696] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.651698] EDD information not available.
[ 0.825505] isapnp: No Plug & Play device found
[ 0.825539] Freeing unused kernel memory: 688k freed
[ 0.826049] Write protecting the kernel text: 4940k
[ 0.826092] Write protecting the kernel read-only data: 1976k
[ 0.833049] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 0.846537] udev[74]: starting version 163
[ 0.960863] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.960893] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+
compatible chip, use 8139too
[ 0.966940] hub 1-7:1.0: USB hub found
[ 0.967277] hub 1-7:1.0: 4 ports detected
[ 0.968871] scsi0 : pata_atiixp
[ 0.981105] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.981176] alloc irq_desc for 20 on node -1
[ 0.981179] alloc kstat_irqs on node -1
[ 0.981191] 8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.982713] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xdf00,
00:13:d3:52:79:5c, IRQ 20
[ 0.989335] firewire_ohci 0000:02:04.0: PCI INT A -> GSI 21 (level, low) ->
IRQ 9
[ 0.989422] scsi1 : pata_atiixp
[ 0.990513] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[ 0.990518] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[ 0.990646] sata_sil 0000:00:12.0: version 2.4
[ 0.995144] scsi2 : sata_sil
[ 0.995376] scsi3 : sata_sil
[ 0.995513] ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
[ 0.995519] ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
[ 1.085024] firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI v1.10, 4
IR + 8 IT contexts, quirks 0x1
[ 1.172682] ata2.00: ATAPI: HL-DT-STDVDRRW GWA-4164B, 1.80, max UDMA/33
[ 1.172715] ata2.01: ATAPI: ASUS DVD-E616P3H, 1.04, max UDMA/33
[ 1.188638] ata2.00: configured for UDMA/33
[ 1.204547] ata2.01: configured for UDMA/33
[ 1.208053] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRRW GWA-4164B 1.80
PQ: 0 ANSI: 5
[ 1.213348] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.213352] Uniform CD-ROM driver Revision: 3.20
[ 1.213480] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.213560] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.220787] scsi 1:0:1:0: CD-ROM ASUS DVD-E616P3H 1.04
PQ: 0 ANSI: 5
[ 1.224093] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 1.224181] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.224314] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.312062] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.320333] ata3.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E01, max UDMA/100
[ 1.320338] ata3.00: 488397168 sectors, multi 16: LBA48
[ 1.328350] ata3.00: configured for UDMA/100
[ 1.328462] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0
PQ: 0 ANSI: 5
[ 1.328618] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 1.328661] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.328674] sd 2:0:0:0: [sda] Write Protect is off
[ 1.328678] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.328703] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.328901] sda: sda1 sda2 <
[ 1.384030] usb 3-4: new full speed USB device using ohci_hcd and address 2
[ 1.394307] sda5 >
[ 1.394639] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.576118] firewire_core: created device fw0: GUID 0010dc0000b60ade, S400
[ 1.603410] Initializing USB Mass Storage driver...
[ 1.603562] scsi4 : usb-storage 3-4:1.0
[ 1.603668] usbcore: registered new interface driver usb-storage
[ 1.603671] USB Mass Storage support registered.
[ 1.648061] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.669265] usb 1-7.4: new high speed USB device using ehci_hcd and address 4
[ 1.763210] hub 1-7.4:1.0: USB hub found
[ 1.763522] hub 1-7.4:1.0: 4 ports detected
[ 1.957622] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.957628] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.036337] usb 1-7.4.3: new high speed USB device using ehci_hcd and
address 5
[ 2.201361] usb 1-7.4.4: new full speed USB device using ehci_hcd and
address 6
[ 2.216794] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 2.216807] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode
14418162
[ 2.216973] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode
14418161
[ 2.217032] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode
2621473
[ 2.217051] EXT4-fs (sda1): 3 orphan inodes deleted
[ 2.217055] EXT4-fs (sda1): recovery complete
[ 2.596225] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 2.609487] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 2.615123] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 2.621103] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 2.627098] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 2.627644] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.627810] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 2.627960] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 2.628125] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 2.657101] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2.667097] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 2.697089] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 2.707096] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 12.634730] Adding 3068924k swap on /dev/sda5. Priority:-1 extents:1
across:3068924k
[ 12.725873] udev[396]: starting version 163
[ 12.758328] lp: driver loaded but no devices found
[ 12.885494] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.885545] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 12.886934] Linux agpgart interface v0.103
[ 12.962781] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x400,
revision 0
[ 13.041611] lp0: using parport0 (interrupt-driven).
[ 13.057168] ppdev: user-space parallel port driver
[ 13.110251] nvidia: module license 'NVIDIA' taints kernel.
[ 13.110256] Disabling lock debugging due to kernel taint
[ 13.131442] cfg80211: Calling CRDA to update world regulatory domain
[ 13.136569] Linux video capture interface: v2.00
[ 13.199303] saa7146: register extension 'budget_av'.
[ 13.199342] budget_av 0000:02:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 13.199399] saa7146: found saa7146 @ mem f825c000 (revision 1, irq 20)
(0x153b,0x1154).
[ 13.199407] saa7146 (0): dma buffer size 192512
[ 13.199411] DVB: registering new adapter (TerraTec Cinergy 1200 DVB-S)
[ 13.229489] psmouse serio1: ID: 10 00 64
[ 13.233507] cfg80211: World regulatory domain updated:
[ 13.233518] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 13.233524] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.233528] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.233531] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.233534] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.233537] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.234658] adapter failed MAC signature check
[ 13.234663] encoded MAC from EEPROM was
ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
[ 13.301088] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.325349] usb 1-7.4.3: reset high speed USB device using ehci_hcd and
address 5
[ 13.363368] 6:1:1: endpoint lacks sample rate attribute bit, cannot set.
[ 13.386723] usbcore: registered new interface driver snd-usb-audio
[ 13.456540] phy0: Selected rate control algorithm 'minstrel'
[ 13.457282] zd1211rw 1-7.4.3:1.0: phy0
[ 13.457309] usbcore: registered new interface driver zd1211rw
[ 13.502899] KNC1-0: MAC addr = 00:0a:ac:01:ad:14
[ 13.510612] alloc irq_desc for 17 on node -1
[ 13.510616] alloc kstat_irqs on node -1
[ 13.510626] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17
(level, low) -> IRQ 17
[ 13.787218] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input3
[ 13.809227] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
[ 13.809565] budget-av: ci interface initialised.
[ 14.300345] type=1400 audit(1306088308.142:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient3" pid=658 comm="apparmor_parser"
[ 14.300659] type=1400 audit(1306088308.142:3): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=658 comm="apparmor_parser"
[ 14.300839] type=1400 audit(1306088308.142:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=658 comm="apparmor_parser"
[ 14.302361] type=1400 audit(1306088308.146:5): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=664
comm="apparmor_parser"
[ 14.302676] type=1400 audit(1306088308.146:6): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664
comm="apparmor_parser"
[ 14.302858] type=1400 audit(1306088308.146:7): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script"
pid=664 comm="apparmor_parser"
[ 14.304566] type=1400 audit(1306088308.146:8): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=760
comm="apparmor_parser"
[ 14.304882] type=1400 audit(1306088308.146:9): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760
comm="apparmor_parser"
[ 14.305065] type=1400 audit(1306088308.150:10): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script"
pid=760 comm="apparmor_parser"
[ 14.527709] alloc irq_desc for 18 on node -1
[ 14.527713] alloc kstat_irqs on node -1
[ 14.527723] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.527736] nvidia 0000:01:00.0: setting latency timer to 64
[ 14.527742] vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.528253] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep
13 06:35:06 PDT 2010
[ 14.844685] zd1211rw 1-7.4.3:1.0: firmware version 4725
[ 14.884694] zd1211rw 1-7.4.3:1.0: zd1211b chip 0586:3410 v4810 high 00-19-cb
AL2230_RF pa0 g--NS
[ 14.886951] cfg80211: Calling CRDA for country: DE
[ 14.890953] cfg80211: Regulatory domain changed to country: DE
[ 14.890958] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 14.890962] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.890965] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 14.890968] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 14.907291] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.925415] eth0: link down
[ 14.925710] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.017886] type=1400 audit(1306088308.862:11): apparmor="STATUS"
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=866
comm="apparmor_parser"
ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: gnome-system-log 2.31.1-0ubuntu1
ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11
Uname: Linux 2.6.35-28-generic i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Sun May 22 20:23:37 2011
ExecutablePath: /usr/bin/gnome-system-log
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
ProcEnviron:
LANG=de_DE.UTF-8
SHELL=/bin/bash
SourcePackage: gnome-utils
XsessionErrors:
(polkit-gnome-authentication-agent-1:1346): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
(nautilus:1349): GConf-CRITICAL **: gconf_value_free: assertion `value !=
NULL' failed
** Affects: ubuntu
Importance: Undecided
Status: New
** Tags: apport-bug i386 maverick
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/786664
Title:
Problems by starting the Ubuntu OS
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
