Hi Until this issue is resolved (access to this disk is critical to my work) I have temporarily returned to using Edgy, however the problem also exists when running Feisty from the Live DVD so I include the dmesg output from that. I hope that's sufficient. Do let me know please when this bug is fixed, I'm really looking forward to upgrading to Feisty!
On Mon, 2007-04-23 at 18:06 +0000, Brian Murray wrote: > Thanks for taking the time to report this bug and helping to make Ubuntu > better. Could you please add the full output of 'dmesg' as an > attachment after connecting your USD hard drive? Thanks in advance. > > ** Changed in: hal (Ubuntu) > Sourcepackagename: None => hal > Assignee: (unassigned) => Brian Murray > Status: Unconfirmed => Needs Info > $ dmesg [ 0.000000] Linux version 2.6.20-12-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu 2.6.20-12.20-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feda000 end: 000000003ffda000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003ffda000 size: 0000000000026000 end: 0000000040000000 type: 2 [ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010007000 end: 00000000f0007000 type: 2 [ 0.000000] copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000fed20000 size: 00000000000f0000 end: 00000000fee10000 type: 2 [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffda000 (usable) [ 0.000000] BIOS-e820: 000000003ffda000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262106) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262106 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262106 [ 0.000000] On node 0 totalpages: 262106 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32475 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc9b0 [ 0.000000] ACPI: RSDT (v001 DELL CPi R 0x27d50615 ASL 0x00000061) @ 0x3ffda7d3 [ 0.000000] ACPI: FADT (v001 DELL CPi R 0x27d50615 ASL 0x00000061) @ 0x3ffdb400 [ 0.000000] ACPI: MADT (v001 DELL CPi R 0x27d50615 ASL 0x00000047) @ 0x3ffdbc00 [ 0.000000] ACPI: MCFG (v016 DELL CPi R 0x27d50615 ASL 0x00000061) @ 0x3ffdbbc0 [ 0.000000] ACPI: BOOT (v001 DELL CPi R 0x27d50615 ASL 0x00000061) @ 0x3ffdb7c0 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x3ffdabe6 [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x3ffdaa0e [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030522) @ 0x3ffda813 [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Detected 1862.055 MHz processor. [ 20.518409] Built 1 zonelists. Total pages: 260059 [ 20.518413] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 20.518598] mapped APIC to ffffd000 (fee00000) [ 20.518601] mapped IOAPIC to ffffc000 (fec00000) [ 20.518604] Enabling fast FPU save and restore... done. [ 20.518606] Enabling unmasked SIMD FPU exception support... done. [ 20.518615] Initializing CPU#0 [ 20.518682] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 20.520810] Console: colour VGA+ 80x25 [ 20.521129] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 20.521528] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 20.548711] Memory: 1028104k/1048424k available (1990k kernel code, 19604k reserved, 890k data, 328k init, 130920k highmem) [ 20.548720] virtual kernel memory layout: [ 20.548721] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 20.548722] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 20.548723] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 20.548724] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 20.548725] .init : 0xc03d7000 - 0xc0429000 ( 328 kB) [ 20.548727] .data : 0xc02f1b04 - 0xc03d06d4 ( 890 kB) [ 20.548728] .text : 0xc0100000 - 0xc02f1b04 (1990 kB) [ 20.548731] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 20.626510] Calibrating delay using timer specific routine.. 3727.92 BogoMIPS (lpj=7455846) [ 20.626545] Security Framework v1.0.0 initialized [ 20.626552] SELinux: Disabled at boot. [ 20.626566] Mount-cache hash table entries: 512 [ 20.626686] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 [ 20.626696] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.626699] CPU: L2 cache: 2048K [ 20.626701] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 [ 20.626710] Compat vDSO mapped to ffffe000. [ 20.626713] Remapping vsyscall page to ffffe000 [ 20.626723] Checking 'hlt' instruction... OK. [ 20.642563] SMP alternatives: switching to UP code [ 20.642722] Freeing SMP alternatives: 11k freed [ 20.642878] Early unpacking initramfs... done [ 20.947364] ACPI: Core revision 20060707 [ 20.955867] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.959250] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 20.959272] Total of 1 processors activated (3727.92 BogoMIPS). [ 20.959461] ENABLING IO-APIC IRQs [ 20.959653] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 21.105746] Brought up 1 CPUs [ 21.105955] Booting paravirtualized kernel on bare hardware [ 21.106025] Time: 10:42:26 Date: 03/24/107 [ 21.106049] NET: Registered protocol family 16 [ 21.106116] EISA bus registered [ 21.106120] ACPI: bus type pci registered [ 21.143597] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10 [ 21.143599] PCI: Using configuration type 1 [ 21.143601] Setting up standard PCI resources [ 21.159865] ACPI: Interpreter enabled [ 21.159867] ACPI: Using IOAPIC for interrupt routing [ 21.161175] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.161182] PCI: Probing PCI hardware (bus 00) [ 21.161256] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 [ 21.172940] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 21.172945] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 21.173133] Boot video device is 0000:01:00.0 [ 21.173547] PCI: Transparent bridge - 0000:00:1e.0 [ 21.173609] PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses') [ 21.173612] Please report the result to linux-kernel to fix this permanently [ 21.173639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.188461] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 21.188678] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 21.188893] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) [ 21.189108] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11) [ 21.189313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 21.189520] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 21.189733] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 21.190090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 21.190592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 21.190898] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.190906] pnp: PnP ACPI init [ 21.216684] pnp: PnP ACPI: found 11 devices [ 21.216687] PnPBIOS: Disabled by ACPI PNP [ 21.216724] PCI: Using ACPI for IRQ routing [ 21.216726] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.242549] NET: Registered protocol family 8 [ 21.242551] NET: Registered protocol family 20 [ 21.256392] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 21.256395] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved [ 21.256398] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved [ 21.256402] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved [ 21.256405] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved [ 21.256407] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved [ 21.256410] pnp: 00:03: ioport range 0x1060-0x107f has been reserved [ 21.256413] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved [ 21.256415] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved [ 21.256421] pnp: 00:08: ioport range 0x900-0x90f has been reserved [ 21.256423] pnp: 00:08: ioport range 0x910-0x91f has been reserved [ 21.256426] pnp: 00:08: ioport range 0x920-0x92f has been reserved [ 21.256428] pnp: 00:08: ioport range 0x930-0x93f has been reserved [ 21.256431] pnp: 00:08: ioport range 0x940-0x97f has been reserved [ 21.256649] PCI: Bridge: 0000:00:01.0 [ 21.256650] IO window: disabled. [ 21.256654] MEM window: dd000000-dfefffff [ 21.256657] PREFETCH window: c0000000-cfffffff [ 21.256665] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 21.256668] IO window: 00002000-000020ff [ 21.256672] IO window: 00002400-000024ff [ 21.256676] PREFETCH window: 50000000-53ffffff [ 21.256681] MEM window: 54000000-57ffffff [ 21.256685] PCI: Bridge: 0000:00:1e.0 [ 21.256688] IO window: 2000-2fff [ 21.256693] MEM window: dcf00000-dcffffff [ 21.256698] PREFETCH window: 50000000-53ffffff [ 21.256713] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.256717] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.256729] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 21.256743] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 21.256747] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 21.256770] NET: Registered protocol family 2 [ 21.293447] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 21.293539] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.294266] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 21.294732] TCP: Hash tables configured (established 131072 bind 65536) [ 21.294736] TCP reno registered [ 21.305514] checking if image is initramfs... it is [ 21.905680] Freeing initrd memory: 6918k freed [ 21.905891] Simple Boot Flag at 0x79 set to 0x1 [ 21.906102] audit: initializing netlink socket (disabled) [ 21.906116] audit(1177411346.468:1): initialized [ 21.906182] highmem bounce pool size: 64 pages [ 21.906238] VFS: Disk quotas dquot_6.5.1 [ 21.906256] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.906305] io scheduler noop registered [ 21.906307] io scheduler anticipatory registered [ 21.906310] io scheduler deadline registered [ 21.906318] io scheduler cfq registered (default) [ 21.906561] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.906589] assign_interrupt_mode Found MSI capability [ 21.906592] Allocate Port Service[0000:00:01.0:pcie00] [ 21.906711] isapnp: Scanning for PnP cards... [ 22.260164] isapnp: No Plug & Play device found [ 22.281340] Real Time Clock Driver v1.12ac [ 22.281393] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.281966] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 22.281975] ACPI: PCI interrupt for device 0000:00:1e.3 disabled [ 22.282040] mice: PS/2 mouse device common for all mice [ 22.282508] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.282698] input: Macintosh mouse button emulation as /class/input/input0 [ 22.282727] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 22.282731] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 22.282949] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 22.288353] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.288358] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.288568] EISA: Probing bus 0 at eisa.0 [ 22.288575] Cannot allocate resource for EISA slot 1 [ 22.288578] Cannot allocate resource for EISA slot 2 [ 22.288601] EISA: Detected 0 cards. [ 22.318644] TCP cubic registered [ 22.318653] NET: Registered protocol family 1 [ 22.318672] Using IPI No-Shortcut mode [ 22.318737] ACPI: (supports S0 S3 S4 S5) [ 22.318779] Magic number: 3:534:730 [ 22.319045] Freeing unused kernel memory: 328k freed [ 22.319706] Time: tsc clocksource has been installed. [ 22.320520] input: AT Translated Set 2 keyboard as /class/input/input1 [ 23.515713] Capability LSM initialized [ 23.547426] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 23.547431] ACPI: Processor [CPU0] (supports 8 throttling states) [ 23.547438] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 23.550848] ACPI: Thermal Zone [THM] (50 C) [ 23.848021] usbcore: registered new interface driver usbfs [ 23.848042] usbcore: registered new interface driver hub [ 23.848059] usbcore: registered new device driver usb [ 23.848733] USB Universal Host Controller Interface driver v3.0 [ 23.848773] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.848784] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.848788] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.848921] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 23.848955] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80 [ 23.849040] usb usb1: configuration #1 chosen from 1 choice [ 23.849059] hub 1-0:1.0: USB hub found [ 23.849064] hub 1-0:1.0: 2 ports detected [ 23.935853] ieee1394: Initialized config rom entry `ip1394' [ 23.953275] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 23.953288] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.953292] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.953310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 23.953343] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000bf60 [ 23.953425] usb usb2: configuration #1 chosen from 1 choice [ 23.953445] hub 2-0:1.0: USB hub found [ 23.953450] hub 2-0:1.0: 2 ports detected [ 24.056904] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 24.056917] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 24.056921] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.056946] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 24.056978] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000bf40 [ 24.057062] usb usb3: configuration #1 chosen from 1 choice [ 24.057083] hub 3-0:1.0: USB hub found [ 24.057089] hub 3-0:1.0: 2 ports detected [ 3.500000] Time: acpi_pm clocksource has been installed. [ 3.544000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 3.544000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 3.544000] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.544000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 3.544000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bf20 [ 3.544000] usb usb4: configuration #1 chosen from 1 choice [ 3.544000] hub 4-0:1.0: USB hub found [ 3.544000] hub 4-0:1.0: 2 ports detected [ 3.576000] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 3.648000] b44.c:v1.01 (Jun 16, 2006) [ 3.648000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 3.652000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:12:3f:e6:4c:82 [ 3.652000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19 [ 3.704000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.704000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.704000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.704000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 3.704000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.704000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.704000] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800 [ 3.708000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.708000] usb usb5: configuration #1 chosen from 1 choice [ 3.708000] hub 5-0:1.0: USB hub found [ 3.708000] hub 5-0:1.0: 8 ports detected [ 3.708000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dcffc800-dcffcfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.724000] usb 1-1: device descriptor read/all, error -71 [ 3.816000] SCSI subsystem initialized [ 3.820000] libata version 2.20 loaded. [ 3.824000] ahci 0000:00:1f.2: version 2.1 [ 3.824000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 3.824000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 3.824000] ahci: probe of 0000:00:1f.2 failed with error -22 [ 3.824000] ata_piix 0000:00:1f.2: version 2.10ac1 [ 3.824000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.980000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18 [ 3.980000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.980000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 [ 3.980000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 [ 3.980000] scsi0 : ata_piix [ 4.144000] ata1.00: ATA-6: HTS726060M9AT00, MH4OA6EA, max UDMA/100 [ 4.144000] ata1.00: 117210240 sectors, multi 8: LBA48 [ 4.144000] ata1.00: applying bridge limits [ 4.156000] ata1.00: configured for UDMA/100 [ 4.156000] scsi1 : ata_piix [ 4.280000] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 4.412000] usb 5-1: configuration #1 chosen from 1 choice [ 4.492000] ata2.00: ATAPI, max UDMA/33 [ 4.672000] ata2.00: configured for UDMA/33 [ 4.672000] scsi 0:0:0:0: Direct-Access ATA HTS726060M9AT00 MH4O PQ: 0 ANSI: 5 [ 4.672000] scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462C DE01 PQ: 0 ANSI: 5 [ 4.684000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 4.684000] sda: Write Protect is off [ 4.684000] sda: Mode Sense: 00 3a 00 00 [ 4.684000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.684000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) [ 4.684000] sda: Write Protect is off [ 4.684000] sda: Mode Sense: 00 3a 00 00 [ 4.684000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.684000] sda:<6>usb 5-5: new high speed USB device using ehci_hcd and address 4 [ 4.968000] usb 5-5: configuration #1 chosen from 1 choice [ 4.968000] usbcore: registered new interface driver libusual [ 4.972000] Initializing USB Mass Storage driver... [ 4.988000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc000374e6430] [ 5.056000] sda1 sda2 < sda5 > [ 5.072000] sd 0:0:0:0: Attached scsi disk sda [ 5.076000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.076000] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.076000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.076000] Uniform CD-ROM driver Revision: 3.20 [ 5.076000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.208000] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 5.384000] usb 1-2: configuration #1 chosen from 1 choice [ 5.384000] scsi2 : SCSI emulation for USB Mass Storage devices [ 5.384000] usb-storage: device found at 2 [ 5.384000] usb-storage: waiting for device to settle before scanning [ 5.384000] scsi3 : SCSI emulation for USB Mass Storage devices [ 5.384000] usb-storage: device found at 4 [ 5.384000] usb-storage: waiting for device to settle before scanning [ 5.384000] usbcore: registered new interface driver usb-storage [ 5.384000] USB Mass Storage support registered. [ 5.396000] usbcore: registered new interface driver hiddev [ 5.408000] input: Microsoft Basic Optical Mouse as /class/input/input2 [ 5.408000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2 [ 5.408000] usbcore: registered new interface driver usbhid [ 5.408000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 6.080000] kjournald starting. Commit interval 5 seconds [ 6.080000] EXT3-fs: mounted filesystem with ordered data mode. [ 6.448000] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 6.536000] ISO 9660 Extensions: RRIP_1991A [ 6.592000] Registering unionfs 20060916-2203 [ 6.592000] unionfs: debugging is not enabled [ 6.604000] loop: loaded (max 8 devices) [ 6.680000] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher [ 10.384000] usb-storage: device scan complete [ 10.384000] usb-storage: device scan complete [ 10.384000] scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US03 PQ: 0 ANSI: 0 [ 10.384000] scsi 2:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0 [ 10.388000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [ 10.388000] sdb: Write Protect is off [ 10.388000] sdb: Mode Sense: 27 00 00 00 [ 10.388000] sdb: assuming drive cache: write through [ 10.388000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) [ 10.388000] sdb: Write Protect is off [ 10.388000] sdb: Mode Sense: 27 00 00 00 [ 10.388000] sdb: assuming drive cache: write through [ 10.388000] sdb: sdb1 [ 15.568000] sd 2:0:0:0: Attached scsi disk sdb [ 15.568000] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 15.584000] sr1: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 15.584000] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 15.584000] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 70.896000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 70.924000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 71.048000] iTCO_vendor_support: vendor-support=0 [ 71.164000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) [ 71.164000] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) [ 71.164000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 71.212000] intel_rng: FWH not detected [ 72.128000] Linux agpgart interface v0.101 (c) Dave Jones [ 72.168000] agpgart: Detected an Intel 915GM Chipset. [ 72.184000] agpgart: AGP aperture is 256M @ 0x0 [ 72.516000] input: PS/2 Mouse as /class/input/input3 [ 72.516000] input: PC Speaker as /class/input/input4 [ 72.536000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 [ 72.968000] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 72.968000] sdhci: Copyright(c) Pierre Ossman [ 72.968000] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17) [ 72.968000] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18 [ 72.968000] mmc0: SDHCI at 0xdcffc700 irq 18 DMA [ 73.068000] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189] [ 73.144000] ieee80211_crypt: registered algorithm 'NULL' [ 73.144000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 73.144000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 73.196000] Yenta: ISA IRQ mask 0x04b8, PCI irq 17 [ 73.196000] Socket status: 30000006 [ 73.196000] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 73.196000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 73.196000] cs: IO port probe 0x2000-0x2fff: clean. [ 73.196000] pcmcia: parent PCI bridge Memory window: 0xdcf00000 - 0xdcffffff [ 73.196000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 73.224000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 73.224000] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 73.224000] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 73.224000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 74.520000] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 74.576000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 74.576000] PCI: Setting latency timer of device 0000:00:1e.2 to 64 [ 74.992000] cs: IO port probe 0x100-0x3af: clean. [ 74.992000] cs: IO port probe 0x3e0-0x4ff: clean. [ 74.992000] cs: IO port probe 0x820-0x8ff: clean. [ 74.992000] cs: IO port probe 0xc00-0xcf7: clean. [ 74.996000] cs: IO port probe 0xa00-0xaff: clean. [ 75.396000] intel8x0_measure_ac97_clock: measured 55392 usecs [ 75.396000] intel8x0: clocking to 48000 [ 76.084000] NET: Registered protocol family 17 [ 76.176000] fuse init (API version 7.8) [ 81.412000] ACPI: AC Adapter [AC] (on-line) [ 81.792000] ACPI: Battery Slot [BAT0] (battery present) [ 81.864000] input: Lid Switch as /class/input/input6 [ 81.888000] ACPI: Lid Switch [LID] [ 81.944000] input: Power Button (CM) as /class/input/input7 [ 81.968000] ACPI: Power Button (CM) [PBTN] [ 82.028000] input: Sleep Button (CM) as /class/input/input8 [ 82.048000] ACPI: Sleep Button (CM) [SBTN] [ 82.084000] No dock devices found. [ 82.100000] Using specific hotkey driver [ 82.148000] ibm_acpi: ec object not found [ 82.224000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 82.300000] pcc_acpi: loading... [ 91.344000] lp: driver loaded but no devices found [ 91.760000] ppdev: user-space parallel port driver [ 99.188000] apm: BIOS not found. [ 102.352000] Bluetooth: Core ver 2.11 [ 102.352000] NET: Registered protocol family 31 [ 102.352000] Bluetooth: HCI device and connection manager initialized [ 102.352000] Bluetooth: HCI socket layer initialized [ 102.492000] Bluetooth: L2CAP ver 2.8 [ 102.492000] Bluetooth: L2CAP socket layer initialized [ 103.304000] Bluetooth: RFCOMM socket layer initialized [ 103.304000] Bluetooth: RFCOMM TTY layer initialized [ 103.304000] Bluetooth: RFCOMM ver 1.8 [ 109.992000] NET: Registered protocol family 10 [ 109.992000] lo: Disabled Privacy Extensions [ 109.992000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 109.992000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 173.464000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 173.508000] ieee80211_crypt: registered algorithm 'TKIP' [ 192.924000] eth1: no IPv6 routers present -- No Automount for FAT32 Seagate USB2 HDD (Feisty) https://bugs.launchpad.net/bugs/108715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
