I am experiencing the same problems. Keboard input is frequently dropped in Libreoffice and also the first letter in a "search field" such as google.
Dmesg output: [ 1.178396] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 1.178398] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff] [ 1.178400] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff] [ 1.178402] pci 0000:00:03.0: PCI bridge to [bus 01-01] [ 1.178404] pci 0000:00:03.0: bridge window [io 0xb000-0xbfff] [ 1.178408] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbbfffff] [ 1.178411] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.178415] pci 0000:00:1c.0: PCI bridge to [bus 06-06] [ 1.178417] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.178421] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 1.178425] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.178429] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 1.178432] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 1.178436] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff] [ 1.178439] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.178444] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 1.178446] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 1.178451] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff] [ 1.178454] pci 0000:00:1c.5: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref] [ 1.178459] pci 0000:00:1c.6: PCI bridge to [bus 03-03] [ 1.178461] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff] [ 1.178465] pci 0000:00:1c.6: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.178469] pci 0000:00:1c.6: bridge window [mem 0xc0c00000-0xc0dfffff 64bit pref] [ 1.178474] pci 0000:00:1c.7: PCI bridge to [bus 02-02] [ 1.178476] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff] [ 1.178480] pci 0000:00:1c.7: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.178484] pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 1.178489] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 1.178491] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 1.178495] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.178498] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.178511] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.178514] pci 0000:00:03.0: setting latency timer to 64 [ 1.178519] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 1.178525] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.178528] pci 0000:00:1c.0: setting latency timer to 64 [ 1.178532] pci 0000:00:1c.4: enabling device (0104 -> 0107) [ 1.178535] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.178538] pci 0000:00:1c.4: setting latency timer to 64 [ 1.178542] pci 0000:00:1c.5: enabling device (0104 -> 0107) [ 1.178545] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.178548] pci 0000:00:1c.5: setting latency timer to 64 [ 1.178556] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.178559] pci 0000:00:1c.6: setting latency timer to 64 [ 1.178567] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.178570] pci 0000:00:1c.7: setting latency timer to 64 [ 1.178575] pci 0000:00:1e.0: setting latency timer to 64 [ 1.178578] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.178580] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.178581] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.178583] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.178585] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.178586] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.178588] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 1.178590] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbbfffff] [ 1.178592] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.178594] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 1.178595] pci_bus 0000:06: resource 1 [mem 0xc0000000-0xc01fffff] [ 1.178597] pci_bus 0000:06: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.178599] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 1.178600] pci_bus 0000:05: resource 1 [mem 0xc0400000-0xc05fffff] [ 1.178602] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.178604] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 1.178606] pci_bus 0000:04: resource 1 [mem 0xc0800000-0xc09fffff] [ 1.178607] pci_bus 0000:04: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref] [ 1.178609] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.178611] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 1.178613] pci_bus 0000:03: resource 2 [mem 0xc0c00000-0xc0dfffff 64bit pref] [ 1.178615] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.178616] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.178618] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 1.178620] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 1.178621] pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.178623] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7] [ 1.178625] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff] [ 1.178627] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff] [ 1.178628] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff] [ 1.178630] pci_bus 0000:07: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.178632] pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.178654] NET: Registered protocol family 2 [ 1.178771] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.179540] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.181841] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.182118] TCP: Hash tables configured (established 524288 bind 65536) [ 1.182120] TCP reno registered [ 1.182129] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.182160] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.182274] NET: Registered protocol family 1 [ 1.182363] pci 0000:01:00.0: Boot video device [ 1.182375] PCI: CLS 32 bytes, default 64 [ 1.182377] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.182379] Placing 64MB software IO TLB between ffff8800bb400000 - ffff8800bf400000 [ 1.182380] software IO TLB at phys 0xbb400000 - 0xbf400000 [ 1.182735] audit: initializing netlink socket (disabled) [ 1.182743] type=2000 audit(1307612328.940:1): initialized [ 1.193608] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.194973] VFS: Disk quotas dquot_6.5.2 [ 1.195018] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.195500] fuse init (API version 7.16) [ 1.195567] msgmni has been set to 7903 [ 1.195725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.195742] io scheduler noop registered [ 1.195744] io scheduler deadline registered [ 1.195773] io scheduler cfq registered (default) [ 1.196050] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.196068] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.196101] intel_idle: MWAIT substates: 0x1120 [ 1.196107] intel_idle: v0.4 model 0x1E [ 1.196108] intel_idle: lapic_timer_reliable_states 0x2 [ 1.196206] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.196210] ACPI: Power Button [PWRB] [ 1.196257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.196259] ACPI: Power Button [PWRF] [ 1.196410] ACPI: acpi_idle yielding to intel_idle [ 1.197746] ERST: Table is not found! [ 1.197784] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.218284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.467464] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.467677] Linux agpgart interface v0.103 [ 1.468522] brd: module loaded [ 1.468913] loop: module loaded [ 1.468972] i2c-core: driver [adp5520] using legacy suspend method [ 1.468974] i2c-core: driver [adp5520] using legacy resume method [ 1.469029] ata_piix 0000:00:1f.2: version 2.13 [ 1.469045] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.469049] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.469078] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.469280] scsi0 : ata_piix [ 1.469347] scsi1 : ata_piix [ 1.470137] ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21 [ 1.470141] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21 [ 1.470157] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.470161] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.470185] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.470333] scsi2 : ata_piix [ 1.470375] scsi3 : ata_piix [ 1.471067] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21 [ 1.471070] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21 [ 1.471103] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 1.471108] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.471129] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 1.471140] pata_acpi 0000:03:00.1: PCI INT B disabled [ 1.471337] Fixed MDIO Bus: probed [ 1.471356] PPP generic driver version 2.4.2 [ 1.471386] tun: Universal TUN/TAP device driver, 1.6 [ 1.471387] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.471448] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.471459] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.471474] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.471477] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.471502] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.545533] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.549398] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.549410] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7ffe000 [ 1.565457] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.565588] hub 1-0:1.0: USB hub found [ 1.565591] hub 1-0:1.0: 2 ports detected [ 1.565641] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.565652] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.565654] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.565681] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.565720] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.569586] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.569599] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7ffd000 [ 1.585414] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.585537] hub 2-0:1.0: USB hub found [ 1.585540] hub 2-0:1.0: 2 ports detected [ 1.585586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.585594] uhci_hcd: USB Universal Host Controller Interface driver [ 1.585668] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.588109] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.588114] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.588198] mousedev: PS/2 mouse device common for all mice [ 1.588282] rtc_cmos 00:03: RTC can wake from S4 [ 1.588327] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.588350] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.588426] device-mapper: uevent: version 1.0.3 [ 1.588485] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected] [ 1.588528] device-mapper: multipath: version 1.2.0 loaded [ 1.588530] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.588674] cpuidle: using governor ladder [ 1.588781] cpuidle: using governor menu [ 1.588954] TCP cubic registered [ 1.589045] NET: Registered protocol family 10 [ 1.589453] NET: Registered protocol family 17 [ 1.589465] Registering the dns_resolver key type [ 1.590444] PM: Hibernation image not present or could not be loaded. [ 1.590450] registered taskstats version 1 [ 1.590714] Magic number: 15:209:626 [ 1.590733] pci 0000:00:1b.0: hash matches [ 1.590891] rtc_cmos 00:03: setting system clock to 2011-06-09 09:38:50 UTC (1307612330) [ 1.590893] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.590894] EDD information not available. [ 1.825848] ata4: SATA link down (SStatus 0 SControl 300) [ 1.836717] ata3: SATA link down (SStatus 0 SControl 300) [ 1.884864] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.035299] hub 1-1:1.0: USB hub found [ 2.035503] hub 1-1:1.0: 6 ports detected [ 2.154355] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.174202] Refined TSC clocksource calibration: 2674.966 MHz. [ 2.174205] Switching to clocksource tsc [ 2.175152] ata2.00: SATA link down (SStatus 0 SControl 300) [ 2.175165] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.304616] hub 2-1:1.0: USB hub found [ 2.304818] hub 2-1:1.0: 8 ports detected [ 2.324043] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.324058] ata1.01: SATA link down (SStatus 0 SControl 300) [ 2.371525] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 2.371531] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.451353] ata1.00: configured for UDMA/133 [ 2.451779] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 2.451979] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.452191] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 2.452552] sd 0:0:0:0: [sda] Write Protect is off [ 2.452558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.452701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.499323] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 2.500328] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.502089] Freeing unused kernel memory: 956k freed [ 2.502213] Write protecting the kernel read-only data: 10240k [ 2.503280] Freeing unused kernel memory: 184k freed [ 2.507288] Freeing unused kernel memory: 1444k freed [ 2.523846] <30>udev[80]: starting version 167 [ 2.544463] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.544488] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.550667] scsi4 : pata_jmicron [ 2.551018] scsi5 : pata_jmicron [ 2.551341] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [ 2.551343] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [ 2.551475] ahci 0000:03:00.0: version 3.0 [ 2.551486] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.553284] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.553297] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.553326] r8169 0000:02:00.0: setting latency timer to 64 [ 2.556021] r8169 0000:02:00.0: irq 45 for MSI/MSI-X [ 2.556374] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000662000, e0:cb:4e:42:79:e0, XID 083000c0 IRQ 45 [ 2.563502] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.563505] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.563510] ahci 0000:03:00.0: setting latency timer to 64 [ 2.563836] scsi6 : ahci [ 2.564032] scsi7 : ahci [ 2.564113] ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 18 [ 2.564116] ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 18 [ 2.593698] usb 2-1.1: new full speed USB device using ehci_hcd and address 3 [ 2.725342] hub 2-1.1:1.0: USB hub found [ 2.725527] hub 2-1.1:1.0: 3 ports detected [ 2.743773] ata5.00: ATAPI: SONY DVD RW DRU-710A, BY03, max UDMA/66 [ 2.793674] ata5.00: configured for UDMA/66 [ 2.795992] scsi 4:0:0:0: CD-ROM SONY DVD RW DRU-710A BY03 PQ: 0 ANSI: 5 [ 2.798251] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.798255] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.798398] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.798438] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.813118] usb 2-1.5: new high speed USB device using ehci_hcd and address 4 [ 2.912823] ata8: SATA link down (SStatus 0 SControl 300) [ 2.912856] ata7: SATA link down (SStatus 0 SControl 300) [ 2.937328] usbcore: registered new interface driver uas [ 2.966313] firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.969825] Initializing USB Mass Storage driver... [ 2.969877] usb-storage 2-1.5:1.0: Quirks match for vid 1e68 pid 001b: 8020 [ 2.969894] scsi8 : usb-storage 2-1.5:1.0 [ 2.969967] usbcore: registered new interface driver usb-storage [ 2.969969] USB Mass Storage support registered. [ 3.012823] usb 2-1.7: new full speed USB device using ehci_hcd and address 5 [ 3.052592] firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 3.147284] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input2 [ 3.147341] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input0 [ 3.149253] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.1/input/input3 [ 3.149371] generic-usb 0003:046D:C526.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input1 [ 3.149380] usbcore: registered new interface driver usbhid [ 3.149381] usbhid: USB HID core driver [ 3.212313] usb 2-1.8: new full speed USB device using ehci_hcd and address 6 [ 3.244473] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 3.362007] input: Microsoft Microsoft�� Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input4 [ 3.362079] generic-usb 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Microsoft�� Nano Transceiver v1.0] on usb-0000:00:1d.0-1.8/input0 [ 3.367573] input: Microsoft Microsoft�� Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input5 [ 3.367709] generic-usb 0003:045E:0745.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft�� Nano Transceiver v1.0] on usb-0000:00:1d.0-1.8/input1 [ 3.384251] input: Microsoft Microsoft�� Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.2/input/input6 [ 3.384413] generic-usb 0003:045E:0745.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [Microsoft Microsoft�� Nano Transceiver v1.0] on usb-0000:00:1d.0-1.8/input2 [ 3.461839] usb 2-1.1.1: new full speed USB device using ehci_hcd and address 7 [ 3.551558] firewire_core: created device fw0: GUID 001e8c0000c41ddc, S400 [ 3.651269] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input7 [ 3.651333] generic-usb 0003:0A5C:4502.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.1.1/input0 [ 3.731153] usb 2-1.1.2: new full speed USB device using ehci_hcd and address 8 [ 3.847189] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/input/input8 [ 3.847248] generic-usb 0003:0A5C:4503.0007: input,hidraw6: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.1.2/input0 [ 3.920928] usb 2-1.1.3: new full speed USB device using ehci_hcd and address 9 [ 3.961557] scsi 8:0:0:0: Direct-Access TrekStor DS maxi g.u PQ: 0 ANSI: 2 CCS [ 3.962954] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 3.963745] sd 8:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 3.964707] sd 8:0:0:0: [sdb] Write Protect is off [ 3.964710] sd 8:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 3.966057] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.969333] sdb: sdb1 [ 3.972454] sd 8:0:0:0: [sdb] Attached SCSI disk [ 5.150361] Adding 4182012k swap on /dev/sda7. Priority:-1 extents:1 across:4182012k [ 5.378418] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr [ 5.788176] <30>udev[324]: starting version 167 [ 7.192046] Bluetooth: Core ver 2.15 [ 7.192065] NET: Registered protocol family 31 [ 7.192066] Bluetooth: HCI device and connection manager initialized [ 7.192068] Bluetooth: HCI socket layer initialized [ 7.199614] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.199748] usbcore: registered new interface driver btusb [ 7.386483] ATK0110 ATK0110:00: EC enabled [ 7.915619] lp: driver loaded but no devices found [ 8.227346] type=1400 audit(1307605137.137:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser" [ 8.227397] type=1400 audit(1307605137.137:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=504 comm="apparmor_parser" [ 8.227830] type=1400 audit(1307605137.137:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser" [ 8.227863] type=1400 audit(1307605137.137:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser" [ 8.228170] type=1400 audit(1307605137.137:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser" [ 8.228185] type=1400 audit(1307605137.137:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser" [ 9.396226] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9.396268] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 9.396287] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9.592315] hda-codec: no NID for mapping control Independent HP:0:0 [ 9.767501] nvidia: module license 'NVIDIA' taints kernel. [ 9.767504] Disabling lock debugging due to kernel taint [ 9.926451] Bluetooth: L2CAP ver 2.15 [ 9.926453] Bluetooth: L2CAP socket layer initialized [ 10.085144] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.085150] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.085153] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.085435] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011 [ 10.114592] type=1400 audit(1307605139.027:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=797 comm="apparmor_parser" [ 10.115044] type=1400 audit(1307605139.027:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser" [ 10.115331] type=1400 audit(1307605139.027:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=797 comm="apparmor_parser" [ 10.309873] type=1400 audit(1307605139.227:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=801 comm="apparmor_parser" [ 10.438996] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.438998] Bluetooth: BNEP filters: protocol multicast [ 11.142278] Bluetooth: SCO (Voice Link) ver 0.6 [ 11.142280] Bluetooth: SCO socket layer initialized [ 11.281342] usb 2-1.1.1: input irq status -75 received [ 11.305281] usb 2-1.1.1: input irq status -75 received [ 11.329246] usb 2-1.1.1: input irq status -75 received [ 11.612412] Bluetooth: RFCOMM TTY layer initialized [ 11.612416] Bluetooth: RFCOMM socket layer initialized [ 11.612418] Bluetooth: RFCOMM ver 1.11 [ 12.319649] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011880000, using 1216k, total 1216k [ 12.319652] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 12.319653] vesafb: scrolling: redraw [ 12.319655] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 12.319741] Console: switching to colour frame buffer device 80x30 [ 12.319750] fb0: VESA VGA frame buffer device [ 12.375825] ppdev: user-space parallel port driver [ 12.559635] r8169 0000:02:00.0: eth0: link down [ 12.559640] r8169 0000:02:00.0: eth0: link down [ 12.559932] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.337577] r8169 0000:02:00.0: eth0: link up [ 14.337906] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.326213] ioremap error for 0xbf770000-0xbf771000, requested 0x10, got 0x0 [ 17.943779] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 22.811884] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 24.507029] eth0: no IPv6 routers present [ 114.343386] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended [ 114.345086] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 122.529419] CE: hpet2 increased min_delta_ns to 7500 nsec [ 122.529428] CE: hpet2 increased min_delta_ns to 11250 nsec [ 122.529433] hrtimer: interrupt took 6310 ns [ 122.629177] CE: hpet3 increased min_delta_ns to 7500 nsec [ 122.629213] CE: hpet3 increased min_delta_ns to 11250 nsec [ 130.502588] CE: hpet5 increased min_delta_ns to 7500 nsec [ 130.502598] CE: hpet5 increased min_delta_ns to 11250 nsec [ 2117.746931] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 2239.091083] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 2239.978836] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 2240.197935] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 2310.308548] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 2422.622557] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3219.705345] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3219.803958] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3221.021691] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3221.969427] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3249.441733] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3249.611034] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3250.179933] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3280.446722] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3280.705317] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3312.319044] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3402.857604] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3402.976329] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3403.345436] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3403.496307] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3403.694800] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3433.541554] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3464.426137] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3586.777170] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3739.524487] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3740.232767] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 3892.789445] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 3894.535984] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 4107.206102] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 4199.311233] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 4321.872281] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 [ 4445.001383] generic-usb 0003:046D:C526.0001: can't reset device, 0000:00:1d.0-1.7/input0, status -32 [ 4689.672668] generic-usb 0003:046D:C526.0002: can't reset device, 0000:00:1d.0-1.7/input1, status -32 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/625461 Title: keyboard and mouse problems after bluetooth pairing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-evdev/+bug/625461/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
