Public bug reported:
Well maybe it is supported but I'm getting errors on my hardware. 6.06
or 6.06.1 won't boot after a HDD install from either a live or
alternative disc.
6.06 and 6.06.1 live disc HDD install - messages at boot after an install:
ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
Buffer I/O error on device sda, logical block 0
ALERT! /dev/sda3 does not exist. Dropping to a shell!
BusyBox ... Built-in shell (ash)
#
6.06.1 text HDD install - messages at boot after an install:
buffer i/o error on device sda, logical block 0
...
driver sd needs updating please use bus_type methods
Edgy's kernel in 6.06.1 doesn't boot either - gets a kernel panic.
Edgy live disc after install to HDD and messages at boot:
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG
open: No such file or directory (constant spam during boot and shutdown)
I was able to login at GDM and apply all the updates. A bit better and
decent if you can ignore the "open: No such file or directory" spam.
Also direct rendering wasn't working but likely due to AIGLX.
lspci for the controller in Edgy Knot1 is:
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA
Storage Controller IDE (rev 02)
In Knoppix 5.02 its:
0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial
ATA Storage Controller IDE cc=IDE (rev 02)
** Affects: Ubuntu
Importance: Untriaged
Status: Unconfirmed
--
(s)ata_piix - ich7 rev2 sata controller not supported?
https://launchpad.net/bugs/56727
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
