My wireless channel is 9.
Here is the output of the commands you asked for:
$ lspci -k | grep -A3 Network
07:01.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01)
Subsystem: Linksys Device 0060
Kernel driver in use: wl
Kernel modules: wl, ssb
$ nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sky2
State: unavailable
Default: no
HW Address: 00:1F:BC:08:4C:0A
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: eth1 -----------------------------------------------------------------
Type: Wired
Driver: sky2
State: unavailable
Default: no
HW Address: 00:1F:BC:08:4C:09
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
State: disconnected
Default: no
HW Address: 00:18:39:15:74:1A
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: sky2
State: unavailable
Default: no
HW Address: 00:1F:BC:08:4C:0A
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: eth1 -----------------------------------------------------------------
Type: Wired
Driver: sky2
State: unavailable
Default: no
HW Address: 00:1F:BC:08:4C:09
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: wl
State: disconnected
Default: no
HW Address: 00:18:39:15:74:1A
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
$ lsmod | grep brcm
No modules with the letters brcm in them were loaded. I also ran this:
$ lsmod | grep 80211
lib80211_crypt_tkip 17387 0
lib80211 14991 2 lib80211_crypt_tkip,wl
In further testing that I've done, I've also found that I can get the
same behavior when I load the 2.6.37 kernel into Maverick. Let me know
if you need any further information. Thanks.
** Changed in: bcmwl (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/795819
Title:
bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu4 not associating itself
with BCM4321 based wi-fi card
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/795819/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
