Public bug reported:
This appears to be the same issue as noted at this link.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/177166
I have a new usbuirt that I want to use as an IR transmitter/receiver
for mythbuntu 11.04. From a fresh boot, I do the following.
$ sudo /etc/init.d/lirc start
* Starting remote control daemon(s) : LIRC
R3 start-stop-daemon --start
--quiet --oknodo --exec /usr/sbin/lircd -- --output=/var/run/lirc/lircd
--driver=usb_uirt_raw --device=/dev/ttyUSB0 -l --listen
[ OK ]
lircd: could not assign address to socket
lircd: Address already in use
R4 /usr/sbin/lircd --output=/var/run/lirc/lircd1 --driver=usb_uirt_raw
--device=/dev/ttyUSB0 -l --connect=localhost:8765
--pidfile=/var/run/lirc/lircd1.pid
$ irw
$ mode2 --driver=usb_uirt_raw
mode2: WARNING: uirt2_raw: Old UIRT hardware
mode2: uirt2_raw: checksum error
space 754500
pulse 1000
space 700
pulse 1800
space 1600
pulse 950
space 700
pulse 950
space 700
pulse 950
space 750
pulse 1800
space 750
pulse 950
space 750
pulse 950
space 700
pulse 950
space 750
pulse 950
space 750
pulse 950
space 750
pulse 950
space 87300
pulse 950
space 700
pulse 1800
space 1600
pulse 950
space 750
pulse 950
space 700
pulse 950
space 750
pulse 1800
space 750
pulse 950
space 750
pulse 950
space 750
pulse 950
space 750
pulse 950
space 750
pulse 950
space 750
pulse 950
^C
$ irsend LIST "" ""
irsend: Hauppauge
irsend: dish
irsend: dish1
irsend: dish2
irsend: dish3
irsend: dish4
irsend: dish5
irsend: dish6
irsend: dish7
irsend: dish8
irsend: dish9
irsend: dish10
irsend: dish11
irsend: dish12
irsend: dish13
irsend: dish14
irsend: dish15
irsend: dish16
$ sudo irrecord -H usb_uirt_raw -d /dev/ttyUSB0 blah_usb_uirt_raw.conf
BLAH BLAH
Please enter the name for the next button (press <ENTER> to finish recording)
KEY_0
Now hold down button "KEY_0".
Something went wrong. irrecord: uirt2_raw: checksum error
irrecord: uirt2_raw: UIRT version 0905 ok
Please try again. (9 retries left)
I modified the initscript to echo the start stop daemon commands. That is where
the R3 and R4 lines noted above came from. The init script claims it launched
OK, but notes that there was a problem. Before running the script, there was no
file under /var/run/lircd so I don't know why it has a problem with getting the
socket. Then irw failed to produce anything when I pushed buttons on the
remote, while I watch the LED on the uirt blink. I then ran mode2, which
verifies that LIRC is connected to the uirt device via USB and it's passing
bits to LIRC. My current understanding of problem is that the driver for
ttyUSB0 has changed and it doesn't communicate correctly with LIRC. The last
thing I did was to verify that my config files loaded correctly, with irsend
LIST. The haupauge note is the remote, the dish's are for transmitting to the
dish receiver. Thinking that perhaps the config files might be broken, I tried
making my own with once seemed to work, but typically fails on that error
message. I once got KEY_0 to come through as 00, KEY_1 as 01. Which worked, and
was much different than 0x0000000000001001 noted in lircd.conf.hauppauge.
I believe the key issue is that I need an updated config file, however I
can't create it with irrecord, as it appears that program fails because
of the checksum complaint.
Here's my hardware.conf file.
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Hauppauge TV card"
REMOTE_MODULES=""
REMOTE_DRIVER="usb_uirt_raw"
REMOTE_DEVICE="/dev/ttyUSB0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="hauppauge/lircd.conf.hauppauge"
REMOTE_LIRCD_ARGS="-l"
#Chosen IR Transmitter
TRANSMITTER="USB-UIRT2 : Dish Receiver"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER="usb_uirt_raw"
TRANSMITTER_DEVICE="/dev/ttyUSB0"
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF="dish/general.conf"
TRANSMITTER_LIRCD_ARGS="-l"
#TRANSMITTER="USB-UIRT2 : Dish Receiver"
#TRANSMITTER_MODULES=""
#TRANSMITTER_DRIVER="uirt2_raw"
#TRANSMITTER_DEVICE=""
#TRANSMITTER_SOCKET=""
#TRANSMITTER_LIRCD_CONF="dish/general.conf"
#TRANSMITTER_LIRCD_ARGS="-d /dev/ttyUSB0"
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
#LOAD_MODULES="true"
LOAD_MODULES="false"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
#START_LIRCMD=""
START_LIRCMD=""
My /etc/lirc/lirc.conf has several comments, and one line
include "/usr/share/lirc/extras/transmitters/dish/general.conf"
According to synaptic
lirc (0.8.7-0ubuntu4.1)
mythbuntu-control-centre (0.63-0ubuntu1)
some syslog notes that might be of interest include
ul 3 16:22:27 jharvey-Latitude-D620 lircd-0.8.7[1080]: accepted new client on
/var/run/lirc/lircd
Jul 3 16:22:28 jharvey-Latitude-D620 lircd-0.8.7[1080]: uirt2_raw: checksum
error
Jul 3 16:22:28 jharvey-Latitude-D620 lircd-0.8.7[1080]: uirt2_raw: UIRT
version 0905 ok
Jul 3 16:22:36 jharvey-Latitude-D620 lircd-0.8.7[1080]: removed client
Also I expect to be using the driver usb_uirt_raw, not uirt2_raw which
is a valid driver, just not the expected driver.
I'm new to this bug reporting, so feel free to contact me at
[email protected] for more information if there is something I
can do to help with resolving this problem.
ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: linux-image-2.6.38-8-generic 2.6.38-8.42
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: jharvey 1786 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xefebc000 irq 44'
Mixer name : 'SigmaTel STAC9200'
Components : 'HDA:83847690,102801c2,00102201
HDA:14f12bfa,14f100c3,00090000'
Controls : 12
Simple ctrls : 7
Date: Sun Jul 3 21:35:21 2011
HibernationDevice: RESUME=UUID=26c5a0aa-16db-4431-a1a2-bee2c37e9778
InstallationMedia: Mythbuntu 11.04 "Natty Narwhal" - Release amd64 (20110426)
MachineType: Dell Inc. Latitude D620
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcEnviron:
LANGUAGE=en_US:en
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic
root=UUID=5b6c6922-d87a-4c90-aebf-21fee4ee9e6d ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-2.6.38-8-generic N/A
linux-backports-modules-2.6.38-8-generic N/A
linux-firmware 1.52
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/16/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A10
dmi.board.name: 0FT292
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA10:bd05/16/2008:svnDellInc.:pnLatitudeD620:pvr:rvnDellInc.:rn0FT292:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Latitude D620
dmi.sys.vendor: Dell Inc.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug natty
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/805299
Title:
uirt2_raw: checksum error
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/805299/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
