apport information
** Tags added: apport-collected natty staging
** Description changed:
Sometimes its so bad that i can't get a stable connection.
Description: Ubuntu 11.04
Release: 11.04
Ubuntu 2.6.38-10.46-generic 2.6.38.7
My Card:
Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at f0200000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
The Problem occurs when I try to connect to my WPA secured wireless network.
Sometimes it reconnects every few seconds sometimes after some minutes and
sometimes only for a few times right after i logged on.
excerpt from dmesg:
[ 36.563661] wlan0: authenticate with 00:26:5a:26:63:12 (try 1)
[ 36.567514] wlan0: authenticated
[ 36.568503] wlan0: associate with 00:26:5a:26:63:12 (try 1)
[ 36.571074] wlan0: RX AssocResp from 00:26:5a:26:63:12 (capab=0xc31
status=0 aid=1)
[ 36.571078] wlan0: associated
[ 36.578080] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.578127] cfg80211: Calling CRDA for country: GB
[ 36.579190] wlan0: deauthenticating from 00:26:5a:26:63:12 by local choice
(reason=3)
[ 36.630141] cfg80211: All devices are disconnected, going to restore
regulatory settings
[ 36.630148] cfg80211: Restoring regulatory settings
[ 36.630160] cfg80211: Calling CRDA to update world regulatory domain
[ 36.635214] cfg80211: Ignoring regulatory request Set by core since the
driver uses its own custom regulatory domain
[ 36.635220] cfg80211: World regulatory domain updated:
[ 36.635222] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 36.635225] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 36.635229] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 36.635232] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 36.635235] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 36.635238] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 40.311123] wlan0: authenticate with 00:26:5a:26:63:12 (try 1)
[ 40.343979] wlan0: authenticated
[ 40.344027] wlan0: associate with 00:26:5a:26:63:12 (try 1)
[ 40.346785] wlan0: RX AssocResp from 00:26:5a:26:63:12 (capab=0xc31
status=0 aid=1)
[ 40.346790] wlan0: associated
[ 40.353726] cfg80211: Calling CRDA for country: GB
[ 40.355802] wlan0: deauthenticating from 00:26:5a:26:63:12 by local choice
(reason=3)
[ 40.390152] cfg80211: All devices are disconnected, going to restore
regulatory settings
[ 40.390160] cfg80211: Restoring regulatory settings
[ 40.390196] cfg80211: Calling CRDA to update world regulatory domain
[ 40.394433] cfg80211: Ignoring regulatory request Set by core since the
driver uses its own custom regulatory domain
[ 40.394438] cfg80211: World regulatory domain updated:
[ 40.394440] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 40.394444] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 40.394447] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 40.394450] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 40.394453] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 40.394455] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 44.052506] wlan0: authenticate with 00:26:5a:26:63:12 (try 1)
[ 44.054385] wlan0: authenticated
[ 44.054428] wlan0: associate with 00:26:5a:26:63:12 (try 1)
[ 44.057112] wlan0: RX AssocResp from 00:26:5a:26:63:12 (capab=0xc31
status=0 aid=1)
[ 44.057116] wlan0: associated
[ 44.064059] cfg80211: Calling CRDA for country: GB
[ 44.067686] wlan0: deauthenticating from 00:26:5a:26:63:12 by local choice
(reason=3)
[ 44.103119] cfg80211: All devices are disconnected, going to restore
regulatory settings
[ 44.103125] cfg80211: Restoring regulatory settings
[ 44.103152] cfg80211: Calling CRDA to update world regulatory domain
[ 44.107389] cfg80211: Ignoring regulatory request Set by core since the
driver uses its own custom regulatory domain
[ 44.107393] cfg80211: World regulatory domain updated:
[ 44.107395] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 44.107399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 44.107402] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 44.107405] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300
mBi, 2000 mBm)
[ 44.107408] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 44.107411] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
+ ---
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
+ Architecture: amd64
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: samy 1588 F.... pulseaudio
+ CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
+ Card0.Amixer.info:
+ Card hw:0 'Intel'/'HDA Intel at 0xf0400000 irq 47'
+ Mixer name : 'Realtek ALC883'
+ Components : 'HDA:10573055,10573055,00100700
HDA:10ec0883,17341234,00100002'
+ Controls : 28
+ Simple ctrls : 17
+ DistroRelease: Ubuntu 11.04
+ HibernationDevice: RESUME=UUID=81804f21-9513-499b-b253-6f2b66beb94d
+ InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release amd64 (20101007)
+ MachineType: FUJITSU SIEMENS AMILO Pi 2530
+ Package: linux (not installed)
+ ProcEnviron:
+ LANGUAGE=de_DE:en
+ LANG=de_DE.UTF-8
+ SHELL=/bin/bash
+ ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic
root=UUID=c39506cd-fd7d-4800-ac8b-6ac0211bfee1 ro quiet splash vt.handoff=7
+ ProcVersionSignature: Ubuntu 2.6.38-10.46-generic 2.6.38.7
+ RelatedPackageVersions:
+ linux-restricted-modules-2.6.38-10-generic N/A
+ linux-backports-modules-2.6.38-10-generic N/A
+ linux-firmware 1.52
+ RfKill:
+ 0: phy0: Wireless LAN
+ Soft blocked: no
+ Hard blocked: no
+ StagingDrivers: lirc_ite8709
+ Tags: natty staging
+ Uname: Linux 2.6.38-10-generic x86_64
+ UpgradeStatus: Upgraded to natty on 2011-04-29 (80 days ago)
+ UserGroups: adm admin cdrom dialout lpadmin netdev plugdev sambashare
+ dmi.bios.date: 08/03/2007
+ dmi.bios.vendor: Phoenix
+ dmi.bios.version: 1.04C
+ dmi.board.name: F42
+ dmi.board.vendor: FUJITSU SIEMENS
+ dmi.board.version: 00030D0000000001
+ dmi.chassis.type: 10
+ dmi.chassis.vendor: FUJITSU SIEMENS
+ dmi.modalias:
dmi:bvnPhoenix:bvr1.04C:bd08/03/2007:svnFUJITSUSIEMENS:pnAMILOPi2530:pvr:rvnFUJITSUSIEMENS:rnF42:rvr00030D0000000001:cvnFUJITSUSIEMENS:ct10:cvr:
+ dmi.product.name: AMILO Pi 2530
+ dmi.sys.vendor: FUJITSU SIEMENS
** Attachment added: "AcpiTables.txt"
https://bugs.launchpad.net/bugs/811715/+attachment/2216712/+files/AcpiTables.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/811715
Title:
Wireless disconnects and reconnects all the time.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/811715/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
