I think I may have the same problem, I have a HP Compaq nc8430 laptop (precise hw config at the end). I've been running 6.10 ok, but trying clean 7.04 install crashes with the following message:
------------------------------------------ BusyBox v1.1.3 (Deian 1:1.1.3-3ubuntu3) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs) [ 24.808000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action .... 0x2 frozen [ 24.808000] ata5.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 .... ata 36 in [ 30.804000] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 30.804000] ata5.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 .... ata 36 in ------------------------------------------ No matter what resolutions I try or parameters added. ISOs've been md5 checked. I've tried also the Alternate ISO: it installs (weird) but then it doesn't boot at all. Carlos ------------------------------------------ Laptop hw config: - ATI Mobility Radeon X1600 PCI-Express x16 - 2GB RAM DDR2 dual-channel 2 x 1Gb PC2-5300 (333 MHz) 5-5-5-15-20 - Seagate Momentus 7200.1 ST 980825AS harddisk - 80 GB - SATA-150 - Intel Core Duo T2400 - Intel i945PM motherboard -- Crash from ide_pci from generic.ko for jmicron controllers https://bugs.launchpad.net/bugs/84964 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
