Public bug reported: Binary package hint: konqueror
When I switching from eth1 (wi-fi/dhcp) to eth0 (wire/dhcp), konqueror stops working with network. Everything other works just fine (firefox, ping, traceroute, apt-get etc). ifconfig looks ok (only eth0 presents) and route -n show normal table: (I'm using openvpn/tun0 to access my office network) [EMAIL PROTECTED]:~$ route -n Kernel IP routeing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.4.0.6 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 10.4.0.1 10.4.0.6 255.255.255.255 UGH 0 0 0 tun0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.45.0 10.4.0.6 255.255.255.0 UG 0 0 0 tun0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Ping works just fine: [EMAIL PROTECTED]:~$ ping kubuntu.com PING kubuntu.com (82.211.81.158) 56(84) bytes of data. 64 bytes from arctowski.ubuntu.com (82.211.81.158): icmp_seq=1 ttl=46 time=87.9 ms etc.. Firefox is ok too (i'm using it right now) But konqueror does not want to browse net: An error occurred while loading http://kubuntu.com: Could not connect to host http://kubuntu.com/. or An error occurred while loading http://82.211.81.158: Could not connect to host http://82.211.81.158/. As far as I remember It will start working whe i'll switch to eth1 again. ** Affects: kdebase (Ubuntu) Importance: Undecided Status: Unconfirmed -- Feisty: Konqueror stops working when switching network interfaces https://bugs.launchpad.net/bugs/112068 You received this bug notification because you are a member of Kubuntu Team, which is a bug contact for kdebase in ubuntu. -- kubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
