Public bug reported:
Issue:
The current jme driver module distributed in the Linux kernel is
outdated, resulting in non-functioning gigabit capabilities for JMC2x0
series Gigabit NICs by JMicron. The current driver version in Ubuntu's
distributed kernel is 1.0.7. The driver version in the upstream Linux
kernel is 1.0.8. The latest driver version by the OEM is 1.0.8.3, listed
as 1.0.8.2-jmmod in the source code.
The reason I do not use the ubuntu-bug utility to report this bug is
that I have already updated my driver manually from source, so the
information reported would be incorrect.
Kernel version: Ubuntu 2.6.38-11.48-generic 2.6.38.8
Device:
description: Ethernet interface
product: JMC250 PCI Express Gigabit Ethernet Controller
vendor: JMicron Technology Corp.
physical id: 0.5
bus info: pci@0000:04:00.5
logical name: eth0
version: 03
serial: [REMOVED]
size: 1Gbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msix msi bus_master cap_list ethernet
physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=jme
driverversion=1.0.8.2-jmmod duplex=full ip=[REMOVED] latency=0 link=yes
multicast=yes port=MII speed=1Gbit/s
resources: irq:50 memory:f2400000-f2403fff ioport:4400(size=128)
ioport:4000(size=256)
Driver currently distributed:
filename: /lib/modules/2.6.38-8-generic-pae/kernel/drivers/net/jme.ko
version: 1.0.7
license: GPL
description: JMicron JMC2x0 PCI Express Ethernet driver
author: Guo-Fu Tseng <[email protected]>
srcversion: 7CAAF5987A12491BEB1B682
alias: pci:v0000197Bd00000260sv*sd*bc*sc*i*
alias: pci:v0000197Bd00000250sv*sd*bc*sc*i*
depends:
vermagic: 2.6.38-8-generic-pae SMP mod_unload modversions 686
parm: force_pseudohp:Enable pseudo hot-plug feature manually by
driver instead of BIOS. (int)
parm: no_pseudohp:Disable pseudo hot-plug feature. (int)
parm: no_extplug:Do not use external plug signal for pseudo hot-plug.
(int)
Latest driver:
filename: /lib/modules/2.6.38-11-generic/kernel/drivers/net/jme.ko
version: 1.0.8.2-jmmod
license: GPL
description: JMicron JMC2x0 PCI Express Ethernet driver
author: Guo-Fu Tseng <[email protected]>
srcversion: 7F0B9DD2C7FADBD58F36090
alias: pci:v0000197Bd00000260sv*sd*bc*sc*i*
alias: pci:v0000197Bd00000250sv*sd*bc*sc*i*
depends:
vermagic: 2.6.38-11-generic SMP mod_unload modversions 686
parm: force_pseudohp:Enable pseudo hot-plug feature manually by
driver instead of BIOS. (int)
parm: no_pseudohp:Disable pseudo hot-plug feature. (int)
parm: no_extplug:Do not use external plug signal for pseudo hot-plug.
(int)
Latest driver location: ftp://driver.jmicron.com.tw/Ethernet/Linux/
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/851070
Title:
jme driver module outdated
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/851070/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
