This bug is still present in linux-image-2.6.28-11-generic-pae (2.6.38-11.50)... I'm running Natty 11.04 on a Lenovo Thinkpad Edge 420 (e420)
Paterno's fix (comment #13 here) worked for me, SD card immediately mounted with no trouble. How can I fix this? Here's just a snippet of the errors produced upon inserting an SD card before using the comment #13 fix: 17207.043719] mmc0: new SD card at address e624 [17207.044093] mmcblk0: mmc0:e624 SD02G 1.89 GiB [17207.045072] mmcblk0: retrying using single block read [17207.045546] mmcblk0: error -84 transferring data, sector 0, nr 8, card status 0x900 [17207.045557] end_request: I/O error, dev mmcblk0, sector 0 [17207.046411] mmcblk0: error -84 transferring data, sector 2, nr 6, card status 0x900 [17207.046418] end_request: I/O error, dev mmcblk0, sector 2 [17207.048327] quiet_error: 1201 callbacks suppressed [17207.048335] Buffer I/O error on device mmcblk0, logical block 0 [17207.049118] ldm_validate_partition_table(): Disk read failed. [17207.049263] Dev mmcblk0: unable to read RDB block 0 [17207.049990] mmcblk0: retrying using single block read [17207.053198] mmcblk0: unable to read partition table [17207.059826] mmcblk0: retrying using single block read [17207.059935] mmcblk0: error -84 sending read/write command, response 0x0, card status 0xb00 [17207.059943] end_request: I/O error, dev mmcblk0, sector 0 [17207.060041] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x400b00 [17207.060047] end_request: I/O error, dev mmcblk0, sector 1 [17207.060166] mmcblk0: error -84 sending status command [17207.060172] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x0 [17207.060177] end_request: I/O error, dev mmcblk0, sector 2 [17207.060241] mmc0: Got data interrupt 0x00600000 even though no data operation was in progress. [17207.060246] sdhci: =========== REGISTER DUMP (mmc0)=========== [17207.060259] sdhci: Sys addr: 0x2a900200 | Version: 0x00000502 [17207.060271] sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000001 [17207.060283] sdhci: Argument: 0x00000600 | Trn mode: 0x00000013 [17207.060296] sdhci: Present: 0x01ff0000 | Host ctl: 0x00000003 [17207.060308] sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [17207.060320] sdhci: Wake-up: 0x00000000 | Clock: 0x00000107 [17207.060332] sdhci: Timeout: 0x00000009 | Int stat: 0x00000000 [17207.060344] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [17207.060356] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [17207.060367] sdhci: Caps: 0x21e8c8b2 | Caps_1: 0x00008073 [17207.060380] sdhci: Cmd: 0x0000113a | Max curr: 0x00000040 [17207.060383] sdhci: =========================================== -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/773524 Title: [Toshiba Tecra R850] SD card reader doesn't work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/773524/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
