sudo hdparm -i /dev/sdb
Password:
/dev/sdb:
Model=SAMSUNG SP0802N , FwRev=TK100-24,
SerialNo=S00JJ10X390473
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=?16?
CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=156368016
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1 ATA/ATAPI-2
ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
* signifies the current active mode
I did a clean install recently, so this is the default udam2 but then
as given above in the comments my hdd supports ATAPI-5
I thought that was the way, but can do this way also.
--
poor performance hard disk IDE
https://bugs.launchpad.net/bugs/96693
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
