Public bug reported:

Binary package hint: linux-source-2.6.20

There is no sound whatsoever in this toshiba laptop P105 S6024 here is some 
information:
tail -2 /proc/asound/oss/sndstat
Mixers:
0: Conexant CX20551 (Waikiki)

lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT 
Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML 
Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express 
Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition 
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 
02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 
02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 
02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 
02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge 
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA 
Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network 
Connection (rev 02)
0a:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 
1394 Host Controller
0a:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card 
Reader (SD/MMC/MS/MS PRO/xD)
0a:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA 
Standard Compliant SD Host Controller
0a:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection 
(rev 02)

$ amixer
Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 30
  Mono:
  Front Left: Playback 24 [80%] [on]
  Front Right: Playback 24 [80%] [on]
Simple mixer control 'PCM',0
  Capabilities: pvolume pswitch
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 255
  Mono:
  Front Left: Playback 255 [100%] [0.00dB] [on]
  Front Right: Playback 255 [100%] [0.00dB] [on]
Simple mixer control 'Line-In',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [on]
Simple mixer control 'Mic Bypass',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 30
  Front Left: Capture 0 [0%] [-34.50dB] [off]
  Front Right: Capture 0 [0%] [-34.50dB] [off]
Simple mixer control 'IEC958',0
  Capabilities: pswitch pswitch-joined
  Playback channels: Mono
  Mono: Playback [off]
Simple mixer control 'Capture',0
  Capabilities: cvolume cswitch
  Capture channels: Front Left - Front Right
  Limits: Capture 0 - 14
  Front Left: Capture 0 [0%] [0.00dB] [off]
  Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'ExtMic',0
  Capabilities: cswitch cswitch-joined cswitch-exclusive
  Capture exclusive group: 0
  Capture channels: Mono
  Mono: Capture [off]


lspci -nv
00:00.0 0600: 8086:27a0 (rev 03)
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0
        Capabilities: <access denied>

00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at d0200000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at 1800 [size=8]
        Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Memory at d0300000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <access denied>

00:02.1 0380: 8086:27a6 (rev 03)
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0
        Memory at d0280000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 02)
        Subsystem: 1179:ff31
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at d0340000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Capabilities: <access denied>

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: 54000000-540fffff
        Capabilities: <access denied>

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at 1820 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 20
        I/O ports at 1840 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at 1860 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at 1880 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0, IRQ 19
        Memory at d0544000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: d0000000-d00fffff
        Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff
        Capabilities: <access denied>

00:1f.0 0601: 8086:27b9 (rev 02)
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 0
        Capabilities: <access denied>

00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master])
        Subsystem: 1179:ff31
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4 [size=1]
        I/O ports at 0170 [size=8]
        I/O ports at 0374 [size=1]
        I/O ports at 18b0 [size=16]
        Capabilities: <access denied>

00:1f.3 0c05: 8086:27da (rev 02)
        Subsystem: 1179:ff31
        Flags: medium devsel, IRQ 11
        I/O ports at 18c0 [size=32]

03:00.0 0280: 8086:4222 (rev 02)
        Subsystem: 8086:1040
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at 54000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

0a:04.0 0607: 104c:8039
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 168, IRQ 16
        Memory at d0004000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 58000000-5bfff000
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002800-000028ff
        16-bit legacy interface ports at 0001

0a:04.1 0c00: 104c:803a (prog-if 10 [OHCI])
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at d0007000 (32-bit, non-prefetchable) [size=2K]
        Memory at d0000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

0a:04.2 0180: 104c:803b
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at d0005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

0a:04.3 0805: 104c:803c (prog-if 01)
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at d0007800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

0a:08.0 0200: 8086:1092 (rev 02)
        Subsystem: 1179:ff31
        Flags: bus master, medium devsel, latency 64, IRQ 21
        Memory at d0006000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at 2000 [size=64]
        Capabilities: <access denied>


asoundconf list
Names of available sound cards:
Intel


$ cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /home/sheppard/.asoundrc*: No such file or directory


dmesg
[   11.940000] usb usb2: configuration #1 chosen from 1 choice
[   11.940000] hub 2-0:1.0: USB hub found
[   11.940000] hub 2-0:1.0: 2 ports detected
[   11.940000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[   11.940000] e100: Copyright(c) 1999-2006 Intel Corporation
[   12.044000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 20
[   12.044000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   12.044000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.044000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 3
[   12.044000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[   12.044000] usb usb3: configuration #1 chosen from 1 choice
[   12.044000] hub 3-0:1.0: USB hub found
[   12.044000] hub 3-0:1.0: 2 ports detected
[   12.148000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[   12.148000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   12.148000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.148000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 4
[   12.148000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[   12.148000] usb usb4: configuration #1 chosen from 1 choice
[   12.148000] hub 4-0:1.0: USB hub found
[   12.148000] hub 4-0:1.0: 2 ports detected
[   12.252000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 17
[   12.252000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   12.252000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   12.252000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 5
[   12.252000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[   12.252000] usb usb5: configuration #1 chosen from 1 choice
[   12.252000] hub 5-0:1.0: USB hub found
[   12.252000] hub 5-0:1.0: 2 ports detected
[   12.356000] PCI: Enabling device 0000:0a:04.1 (0000 -> 0002)
[   12.356000] ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> 
IRQ 16
[   12.356000] PCI: Setting latency timer of device 0000:0a:04.1 to 64
[   12.388000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   12.408000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  
MMIO=[d0007000-d00077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   12.408000] ata_piix 0000:00:1f.2: version 2.10ac1
[   12.408000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   12.564000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 20
[   12.564000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   12.568000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 
0x000118b0 irq 14
[   12.568000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 
0x000118b8 irq 15
[   12.568000] scsi0 : ata_piix
[   12.572000] usb 3-2: configuration #1 chosen from 1 choice
[   12.588000] usbcore: registered new interface driver hiddev
[   12.600000] input: Acrox USB & PS/2 Mouse as /class/input/input2
[   12.600000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on 
usb-0000:00:1d.1-2
[   12.600000] usbcore: registered new interface driver usbhid
[   12.600000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   12.732000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[   12.732000] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60R, max UDMA/100
[   12.732000] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   12.740000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[   12.740000] ata1.00: configured for UDMA/100
[   12.740000] scsi1 : ata_piix
[   13.064000] ata2.00: ATAPI, max UDMA/33
[   13.228000] ata2.00: configured for UDMA/33
[   13.228000] scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9SA00  MBZO 
PQ: 0 ANSI: 5
[   13.232000] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HV02 
PQ: 0 ANSI: 5
[   13.232000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> 
IRQ 21
[   13.232000] PCI: Setting latency timer of device 0000:0a:08.0 to 64
[   13.260000] e100: eth0: e100_probe: addr 0xd0006000, irq 21, MAC addr 
00:16:36:6A:82:9E
[   13.260000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[   13.260000] sda: Write Protect is off
[   13.260000] sda: Mode Sense: 00 3a 00 00
[   13.260000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   13.260000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[   13.260000] sda: Write Protect is off
[   13.260000] sda: Mode Sense: 00 3a 00 00
[   13.260000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   13.260000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[   13.368000] sd 0:0:0:0: Attached scsi disk sda
[   13.372000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.372000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   13.384000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda 
tray
[   13.384000] Uniform CD-ROM driver Revision: 3.20
[   13.384000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   13.684000] Attempting manual resume
[   13.684000] swsusp: Resume From Partition 8:6
[   13.684000] PM: Checking swsusp image.
[   13.684000] PM: Resume from disk failed.
[   13.720000] kjournald starting.  Commit interval 5 seconds
[   13.720000] EXT3-fs: mounted filesystem with ordered data mode.
[   23.636000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   23.640000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.844000] Linux agpgart interface v0.102 (c) Dave Jones
[   23.876000] agpgart: Detected an Intel 945GM Chipset.
[   23.876000] agpgart: Detected 7932K stolen memory.
[   23.896000] agpgart: AGP aperture is 256M @ 0xc0000000
[   24.092000] Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31]
[   24.092000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   24.092000] Yenta: Routing CardBus interrupts to PCI
[   24.092000] Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66
[   24.144000] iTCO_vendor_support: vendor-support=0
[   24.144000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   24.172000] NET: Registered protocol family 17
[   24.244000] ieee80211_crypt: registered algorithm 'NULL'
[   24.252000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   24.252000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   24.276000] sdhci: Secure Digital Host Controller Interface driver
[   24.276000] sdhci: Copyright(c) Pierre Ossman
[   24.324000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   24.324000] Socket status: 30000006
[   24.324000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to 
#0e
[   24.324000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   24.324000] cs: IO port probe 0x2000-0x2fff: clean.
[   24.324000] pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd00fffff
[   24.324000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   24.324000] PCI: Enabling device 0000:0a:04.2 (0000 -> 0002)
[   24.324000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> 
IRQ 16
[   24.324000] PCI: Setting latency timer of device 0000:0a:04.2 to 64
[   24.324000] sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0)
[   24.324000] PCI: Enabling device 0000:0a:04.3 (0000 -> 0002)
[   24.324000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> 
IRQ 16
[   24.324000] PCI: Setting latency timer of device 0000:0a:04.3 to 64
[   24.324000] mmc0: SDHCI at 0xd0007800 irq 16 DMA
[   24.384000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.0mp
[   24.384000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   24.384000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[   24.384000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[   24.384000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   24.384000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   24.596000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[   24.596000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   24.644000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 
0xa04713/0x0
[   24.644000] synaptics: Toshiba Satellite P105 detected, limiting rate to 
40pps.
[   24.684000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   24.684000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   24.684000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   24.756000] cs: IO port probe 0x100-0x3af: clean.
[   24.756000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   24.760000] cs: IO port probe 0x820-0x8ff: clean.
[   24.760000] cs: IO port probe 0xc00-0xcf7: clean.
[   24.760000] cs: IO port probe 0xa00-0xaff: clean.
[   24.772000] intel_rng: FWH not detected
[   25.100000] fuse init (API version 7.8)
[   25.172000] lp: driver loaded but no devices found
[   25.224000] Adding 1028120k swap on 
/dev/disk/by-uuid/b9d4aeaa-1989-4b8e-ae4d-f82e266148b6.  Priority:-1 extents:1 
across:1028120k
[   25.252000] Adding 1020088k swap on 
/dev/disk/by-uuid/cf6681b8-5bcc-4f26-9195-5581774f065d.  Priority:-2 extents:1 
across:1020088k
[   25.408000] EXT3 FS on sda5, internal journal
[   25.740000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   25.816000] NTFS volume version 3.1.
[   25.860000] kjournald starting.  Commit interval 5 seconds
[   25.860000] EXT3 FS on sda8, internal journal
[   25.860000] EXT3-fs: mounted filesystem with ordered data mode.
[   26.252000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 
802.11a channels)
[   66.468000] NET: Registered protocol family 10
[   66.468000] lo: Disabled Privacy Extensions
[   66.468000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   68.780000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   85.592000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   85.608000] No dock devices found.
[   85.728000] input: Power Button (FF) as /class/input/input4
[   85.728000] ACPI: Power Button (FF) [PWRF]
[   85.728000] input: Lid Switch as /class/input/input5
[   85.728000] ACPI: Lid Switch [LID]
[   85.728000] input: Power Button (CM) as /class/input/input6
[   85.728000] ACPI: Power Button (CM) [PWRB]
[   85.800000] ibm_acpi: ec object not found
[   85.904000] ACPI: Battery Slot [BAT1] (battery present)
[   85.928000] ACPI: AC Adapter [ACAD] (on-line)
[   85.944000] Using specific hotkey driver
[   85.992000] wmi_add device=c19a5800
[   85.992000] calling WQBA
[   85.992000] wmi_add device=c19a5400
[   85.992000] calling WQBA
[   86.028000] pcc_acpi: loading...
[   93.036000] ppdev: user-space parallel port driver
[   93.644000] apm: BIOS not found.
[   93.848000] Bluetooth: Core ver 2.11
[   93.848000] NET: Registered protocol family 31
[   93.848000] Bluetooth: HCI device and connection manager initialized
[   93.848000] Bluetooth: HCI socket layer initialized
[   93.888000] Bluetooth: L2CAP ver 2.8
[   93.888000] Bluetooth: L2CAP socket layer initialized
[   93.984000] Bluetooth: RFCOMM socket layer initialized
[   93.984000] Bluetooth: RFCOMM TTY layer initialized
[   93.984000] Bluetooth: RFCOMM ver 1.8
[   94.980000] [drm] Initialized drm 1.1.0 20060810
[   94.988000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[   94.988000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  133.632000] ieee80211_crypt: registered algorithm 'WEP'
[  133.764000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  151.756000] eth1: no IPv6 routers present
[ 3415.240000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3415.764000] ACPI: PCI interrupt for device 0000:0a:08.0 disabled
[ 3415.964000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 3418.956000] PM: suspend-to-disk mode set to 'shutdown'
[ 3418.956000] Disabling non-boot CPUs ...
[ 3418.976000] Breaking affinity for irq 0
[ 3418.976000] Breaking affinity for irq 9
[ 3419.084000] CPU 1 is now offline
[ 3419.084000] SMP alternatives: switching to UP code
[ 3419.088000] CPU1 is down
[ 3419.088000] Stopping tasks ... done.
[ 3419.812000] Shrinking memory... done (23134 pages freed)
[ 3419.972000] Freed 92536 kbytes in 0.17 seconds (544.32 MB/s)
[ 3419.972000] Suspending console(s)
[ 3419.972000] platform bluetooth: freeze
[ 3419.972000] iTCO_wdt iTCO_wdt: freeze
[ 3419.972000] sr 1:0:0:0: freeze
[ 3419.972000] sd 0:0:0:0: freeze
[ 3419.972000] usbhid 3-2:1.0: freeze
[ 3419.972000] usb 3-2: freeze
[ 3419.988000]  usbdev5.1_ep81: PM: suspend 0->1, parent 5-0:1.0 already 2
[ 3419.988000] hub 5-0:1.0: PM: suspend 2-->1
[ 3419.988000] hub 5-0:1.0: PM: suspend 2->1, parent usb5 already 2
[ 3419.988000]  usbdev5.1_ep00: PM: suspend 0->1, parent usb5 already 2
[ 3419.988000] usb usb5: PM: suspend 2-->1
[ 3419.988000]  usbdev4.1_ep81: PM: suspend 0->1, parent 4-0:1.0 already 2
[ 3419.988000] hub 4-0:1.0: PM: suspend 2-->1
[ 3419.988000] hub 4-0:1.0: PM: suspend 2->1, parent usb4 already 2
[ 3419.988000]  usbdev4.1_ep00: PM: suspend 0->1, parent usb4 already 2
[ 3419.988000] usb usb4: PM: suspend 2-->1
[ 3419.988000] hub 3-0:1.0: freeze
[ 3419.988000] usb usb3: freeze
[ 3419.988000]  usbdev2.1_ep81: PM: suspend 0->1, parent 2-0:1.0 already 2
[ 3419.988000] hub 2-0:1.0: PM: suspend 2-->1
[ 3419.988000] hub 2-0:1.0: PM: suspend 2->1, parent usb2 already 2
[ 3419.988000]  usbdev2.1_ep00: PM: suspend 0->1, parent usb2 already 2
[ 3419.988000] usb usb2: PM: suspend 2-->1
[ 3419.988000]  usbdev1.1_ep81: PM: suspend 0->1, parent 1-0:1.0 already 2
[ 3419.988000] hub 1-0:1.0: PM: suspend 2-->1
[ 3419.988000] hub 1-0:1.0: PM: suspend 2->1, parent usb1 already 2
[ 3419.988000]  usbdev1.1_ep00: PM: suspend 0->1, parent usb1 already 2
[ 3419.988000] usb usb1: PM: suspend 2-->1
[ 3419.988000] platform vesafb.0: freeze
[ 3419.988000] platform eisa.0: freeze
[ 3419.988000] i8042 i8042: freeze
[ 3420.576000] serial8250 serial8250: freeze
[ 3420.576000] pci_express 0000:00:1c.2:pcie02: freeze
[ 3420.576000] pci_express 0000:00:1c.2:pcie00: freeze
[ 3420.576000] pci_express 0000:00:1c.1:pcie02: freeze
[ 3420.576000] pci_express 0000:00:1c.1:pcie00: freeze
[ 3420.576000] pci_express 0000:00:1c.0:pcie02: freeze
[ 3420.576000] pci_express 0000:00:1c.0:pcie00: freeze
[ 3420.576000] platform pcspkr: freeze
[ 3420.576000] i8042 aux 00:08: freeze
[ 3420.576000] i8042 kbd 00:07: freeze
[ 3420.576000] pnp 00:06: freeze
[ 3420.576000] system 00:05: freeze
[ 3420.576000] pnp 00:04: freeze
[ 3420.576000] system 00:03: freeze
[ 3420.576000] pnp 00:02: freeze
[ 3420.576000] system 00:01: freeze
[ 3420.576000] pnp 00:00: freeze
[ 3420.576000] pci 0000:0a:08.0: freeze
[ 3420.576000] sdhci 0000:0a:04.3: freeze
[ 3420.576000] ACPI: PCI interrupt for device 0000:0a:04.3 disabled
[ 3420.592000] tifm_7xx1 0000:0a:04.2: freeze
[ 3420.592000] ACPI: PCI interrupt for device 0000:0a:04.2 disabled
[ 3420.608000] ohci1394 0000:0a:04.1: freeze
[ 3420.608000] ohci1394 does not fully support suspend and resume yet
[ 3420.608000] ieee1394: hpsb_bus_reset called while bus reset already in 
progress
[ 3420.624000] yenta_cardbus 0000:0a:04.0: freeze
[ 3420.624000] pci 0000:03:00.0: freeze
[ 3420.624000] pci 0000:00:1f.3: freeze
[ 3420.624000] ata_piix 0000:00:1f.2: freeze
[ 3420.624000] ata2: ACPI get timing mode failed.
[ 3420.624000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 3420.624000] pci 0000:00:1f.0: freeze
[ 3420.624000] pci 0000:00:1e.0: freeze
[ 3420.624000] ehci_hcd 0000:00:1d.7: freeze
[ 3420.624000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 3420.640000] uhci_hcd 0000:00:1d.3: freeze
[ 3420.640000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 3420.640000] uhci_hcd 0000:00:1d.2: freeze
[ 3420.640000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 3420.640000] uhci_hcd 0000:00:1d.1: freeze
[ 3420.640000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 3420.640000] uhci_hcd 0000:00:1d.0: freeze
[ 3420.640000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 3420.640000] pcieport-driver 0000:00:1c.2: freeze
[ 3420.640000] pcieport-driver 0000:00:1c.1: freeze
[ 3420.640000] pcieport-driver 0000:00:1c.0: freeze
[ 3420.640000] HDA Intel 0000:00:1b.0: freeze
[ 3420.644000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 3420.660000] pci 0000:00:02.1: freeze
[ 3420.660000] pci 0000:00:02.0: freeze
[ 3420.660000] agpgart-intel 0000:00:00.0: freeze
[ 3420.660000] acpi acpi: freeze
[ 3420.660000] PM: snapshotting memory.
[ 3420.660000] platform bluetooth: LATE freeze
[ 3420.660000] iTCO_wdt iTCO_wdt: LATE freeze
[ 3420.660000] platform vesafb.0: LATE freeze
[ 3420.660000] platform eisa.0: LATE freeze
[ 3420.660000] i8042 i8042: LATE freeze
[ 3420.660000] serial8250 serial8250: LATE freeze
[ 3420.660000] platform pcspkr: LATE freeze
[ 3420.660000] pci 0000:0a:08.0: LATE freeze
[ 3420.660000] sdhci 0000:0a:04.3: LATE freeze
[ 3420.660000] tifm_7xx1 0000:0a:04.2: LATE freeze
[ 3420.660000] ohci1394 0000:0a:04.1: LATE freeze
[ 3420.660000] yenta_cardbus 0000:0a:04.0: LATE freeze
[ 3420.660000] pci 0000:03:00.0: LATE freeze
[ 3420.660000] pci 0000:00:1f.3: LATE freeze
[ 3420.660000] pci 0000:00:1f.0: LATE freeze
[ 3420.660000] pci 0000:00:1e.0: LATE freeze
[ 3420.660000] pcieport-driver 0000:00:1c.2: LATE freeze
[ 3420.660000] pcieport-driver 0000:00:1c.1: LATE freeze
[ 3420.660000] pcieport-driver 0000:00:1c.0: LATE freeze
[ 3420.660000] HDA Intel 0000:00:1b.0: LATE freeze
[ 3420.660000] pci 0000:00:02.1: LATE freeze
[ 3420.660000] pci 0000:00:02.0: LATE freeze
[ 3420.660000] agpgart-intel 0000:00:00.0: LATE freeze
[ 3420.660000] swsusp: critical section: 
[ 3420.660000] swsusp: Need to copy 124114 pages
[ 3420.660000] swsusp: Normal pages needed: 116711 + 1024 + 24, available 
pages: 128209
[ 3530.660000] agpgart-intel 0000:00:00.0: EARLY resume
[ 3530.660000] pci 0000:00:02.0: EARLY resume
[ 3530.660000] pci 0000:00:02.1: EARLY resume
[ 3530.660000] HDA Intel 0000:00:1b.0: EARLY resume
[ 3530.660000] pcieport-driver 0000:00:1c.0: EARLY resume
[ 3530.660000] pcieport-driver 0000:00:1c.1: EARLY resume
[ 3530.660000] pcieport-driver 0000:00:1c.2: EARLY resume
[ 3530.660000] uhci_hcd 0000:00:1d.0: EARLY resume
[ 3530.660000] uhci_hcd 0000:00:1d.1: EARLY resume
[ 3530.660000] uhci_hcd 0000:00:1d.2: EARLY resume
[ 3530.660000] uhci_hcd 0000:00:1d.3: EARLY resume
[ 3530.660000] ehci_hcd 0000:00:1d.7: EARLY resume
[ 3530.660000] pci 0000:00:1e.0: EARLY resume
[ 3530.660000] pci 0000:00:1f.0: EARLY resume
[ 3530.660000] ata_piix 0000:00:1f.2: EARLY resume
[ 3530.660000] pci 0000:00:1f.3: EARLY resume
[ 3530.660000] pci 0000:03:00.0: EARLY resume
[ 3530.660000] yenta_cardbus 0000:0a:04.0: EARLY resume
[ 3530.660000] ohci1394 0000:0a:04.1: EARLY resume
[ 3530.660000] tifm_7xx1 0000:0a:04.2: EARLY resume
[ 3530.660000] sdhci 0000:0a:04.3: EARLY resume
[ 3530.660000] pci 0000:0a:08.0: EARLY resume
[ 3530.660000] platform pcspkr: EARLY resume
[ 3530.660000] serial8250 serial8250: EARLY resume
[ 3530.660000] i8042 i8042: EARLY resume
[ 3530.660000] platform eisa.0: EARLY resume
[ 3530.660000] platform vesafb.0: EARLY resume
[ 3530.660000] iTCO_wdt iTCO_wdt: EARLY resume
[ 3530.660000] platform bluetooth: EARLY resume
[ 3530.660000] PM: Image restored successfully.
[ 3530.680000] acpi acpi: resuming
[ 3530.684000] agpgart-intel 0000:00:00.0: resuming
[ 3530.700000] pci 0000:00:02.0: resuming
[ 3530.700000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[ 3530.700000] pci 0000:00:02.1: resuming
[ 3530.700000] HDA Intel 0000:00:1b.0: resuming
[ 3530.716000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 
(was 100006, writing 100002)
[ 3530.716000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[ 3530.716000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 3530.768000] pcieport-driver 0000:00:1c.0: resuming
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 3530.768000] pcieport-driver 0000:00:1c.1: resuming
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 3530.768000] pcieport-driver 0000:00:1c.2: resuming
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 3530.768000] uhci_hcd 0000:00:1d.0: resuming
[ 3530.768000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 19
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3530.768000] usb usb2: root hub lost power or was reset
[ 3530.768000] uhci_hcd 0000:00:1d.1: resuming
[ 3530.768000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 20
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3530.768000] usb usb3: root hub lost power or was reset
[ 3530.768000] uhci_hcd 0000:00:1d.2: resuming
[ 3530.768000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3530.768000] usb usb4: root hub lost power or was reset
[ 3530.768000] uhci_hcd 0000:00:1d.3: resuming
[ 3530.768000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 17
[ 3530.768000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3530.768000] usb usb5: root hub lost power or was reset
[ 3530.768000] ehci_hcd 0000:00:1d.7: resuming
[ 3530.784000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 19
[ 3530.784000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3530.784000] usb usb1: root hub lost power or was reset
[ 3530.788000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3530.788000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[ 3530.788000] pci 0000:00:1e.0: resuming
[ 3530.788000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 
(was 200b0a00, writing 200e0a00)
[ 3530.788000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 3530.788000] pci 0000:00:1f.0: resuming
[ 3530.788000] ata_piix 0000:00:1f.2: resuming
[ 3530.788000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 
(was 2b80001, writing 2b80005)
[ 3530.788000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 20
[ 3530.788000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3530.788000] ata2: ACPI set timing mode failed.
[ 3530.788000] pci 0000:00:1f.3: resuming
[ 3530.788000] pci 0000:03:00.0: resuming
[ 3530.788000] PM: Writing back config space on device 0000:03:00.0 at offset 1 
(was 100000, writing 100002)
[ 3530.788000] yenta_cardbus 0000:0a:04.0: resuming
[ 3530.788000] PM: Writing back config space on device 0000:0a:04.0 at offset f 
(was 340010b, writing 5c0010b)
[ 3530.788000] PM: Writing back config space on device 0000:0a:04.0 at offset 3 
(was 824000, writing 82a820)
[ 3530.788000] ohci1394 0000:0a:04.1: resuming
[ 3530.804000] PM: Writing back config space on device 0000:0a:04.1 at offset f 
(was 4030100, writing 403010b)
[ 3530.804000] PM: Writing back config space on device 0000:0a:04.1 at offset 5 
(was 0, writing d0000000)
[ 3530.804000] PM: Writing back config space on device 0000:0a:04.1 at offset 4 
(was 0, writing d0007000)
[ 3530.804000] PM: Writing back config space on device 0000:0a:04.1 at offset 3 
(was 800000, writing 804000)
[ 3530.804000] PM: Writing back config space on device 0000:0a:04.1 at offset 1 
(was 2100000, writing 2100006)
[ 3530.852000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  
MMIO=[d0007000-d00077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[ 3530.852000] tifm_7xx1 0000:0a:04.2: resuming
[ 3530.868000] PM: Writing back config space on device 0000:0a:04.2 at offset 3 
(was 800000, writing 804000)
[ 3530.868000] PM: Writing back config space on device 0000:0a:04.2 at offset 1 
(was 2100000, writing 2100006)
[ 3530.868000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> 
IRQ 16
[ 3530.868000] sdhci 0000:0a:04.3: resuming
[ 3530.884000] PM: Writing back config space on device 0000:0a:04.3 at offset 3 
(was 800000, writing 804000)
[ 3530.884000] PM: Writing back config space on device 0000:0a:04.3 at offset 1 
(was 2100000, writing 2100006)
[ 3530.884000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> 
IRQ 16
[ 3530.888000] pci 0000:0a:08.0: resuming
[ 3530.888000] pnp 00:00: resuming
[ 3530.888000] system 00:01: resuming
[ 3530.888000] pnp 00:02: resuming
[ 3530.888000] system 00:03: resuming
[ 3530.888000] pnp 00:04: resuming
[ 3530.888000] system 00:05: resuming
[ 3530.888000] pnp 00:06: resuming
[ 3530.888000] i8042 kbd 00:07: resuming
[ 3530.888000] pnp: Device 00:07 does not support activation.
[ 3530.888000] i8042 aux 00:08: resuming
[ 3530.888000] pnp: Device 00:08 does not support activation.
[ 3530.888000] platform pcspkr: resuming
[ 3530.888000] pci_express 0000:00:1c.0:pcie00: resuming
[ 3530.888000] pci_express 0000:00:1c.0:pcie02: resuming
[ 3530.888000] pci_express 0000:00:1c.1:pcie00: resuming
[ 3530.888000] pci_express 0000:00:1c.1:pcie02: resuming
[ 3530.888000] pci_express 0000:00:1c.2:pcie00: resuming
[ 3530.888000] pci_express 0000:00:1c.2:pcie02: resuming
[ 3530.888000] serial8250 serial8250: resuming
[ 3530.888000] i8042 i8042: resuming
[ 3530.892000] atkbd serio0: resuming
[ 3530.936000] platform eisa.0: resuming
[ 3530.936000] psmouse serio1: resuming
[ 3531.484000] platform vesafb.0: resuming
[ 3531.484000] usb usb1: resuming
[ 3531.504000] usb usb2: resuming
[ 3531.544000] usb usb3: resuming
[ 3531.584000] hub 3-0:1.0: resuming
[ 3531.584000] usb usb4: resuming
[ 3531.624000] usb usb5: resuming
[ 3531.664000] usb 3-2: resuming
[ 3531.664000]  usbdev3.2_ep00: PM: resume from 0, parent 3-2 still 1
[ 3531.664000] usbhid 3-2:1.0: PM: resume from 1, parent 3-2 still 1
[ 3531.664000] usbhid 3-2:1.0: resuming
[ 3531.664000]  usbdev3.2_ep81: PM: resume from 0, parent 3-2:1.0 still 1
[ 3531.664000] sd 0:0:0:0: resuming
[ 3531.664000] sr 1:0:0:0: resuming
[ 3531.664000] iTCO_wdt iTCO_wdt: resuming
[ 3531.664000] platform bluetooth: resuming
[ 3531.664000] Restarting tasks ... <6>usb 3-2: USB disconnect, address 2
[ 3531.744000] done.
[ 3531.744000] Enabling non-boot CPUs ...
[ 3531.768000] SMP alternatives: switching to SMP code
[ 3531.768000] Booting processor 1/1 eip 3000
[ 3531.780000] Initializing CPU#1
[ 3531.860000] Calibrating delay using timer specific routine.. 3200.20 
BogoMIPS (lpj=6400408)
[ 3531.860000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 
00000000 0000c189 00000000 00000000
[ 3531.860000] monitor/mwait feature present.
[ 3531.860000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3531.860000] CPU: L2 cache: 2048K
[ 3531.860000] CPU: Physical Processor ID: 0
[ 3531.860000] CPU: Processor Core ID: 1
[ 3531.860000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 
0000c189 00000000 00000000
[ 3531.860000] CPU1: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz 
stepping 08
[ 3531.864000] CPU1 is up
[ 3532.024000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[ 3532.032000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[ 3532.032000] ata1.00: configured for UDMA/100
[ 3532.052000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 3532.052000] sda: Write Protect is off
[ 3532.052000] sda: Mode Sense: 00 3a 00 00
[ 3532.080000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[ 3532.332000] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 3532.348000] ata2.00: configured for UDMA/33
[ 3532.508000] usb 3-2: configuration #1 chosen from 1 choice
[ 3532.524000] input: Acrox USB & PS/2 Mouse as /class/input/input7
[ 3532.524000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on 
usb-0000:00:1d.1-2
[ 3532.924000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 3532.924000] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3532.924000] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003)
[ 3532.924000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> 
IRQ 21
[ 3532.924000] PCI: Setting latency timer of device 0000:0a:08.0 to 64
[ 3532.952000] e100: eth0: e100_probe: addr 0xd0006000, irq 21, MAC addr 
00:16:36:6A:82:9E
[ 3532.964000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 3532.964000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[ 3532.972000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.0mp
[ 3532.972000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 3532.972000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[ 3532.972000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 3532.972000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 3533.024000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3533.884000] input: Power Button (FF) as /class/input/input8
[ 3533.884000] ACPI: Power Button (FF) [PWRF]
[ 3533.888000] input: Lid Switch as /class/input/input9
[ 3533.888000] ACPI: Lid Switch [LID]
[ 3533.888000] input: Power Button (CM) as /class/input/input10
[ 3533.888000] ACPI: Power Button (CM) [PWRB]
[ 3534.136000] ACPI: Thermal Zone [THRM] (49 C)
[ 3534.240000] ACPI: AC Adapter [ACAD] (on-line)
[ 3534.268000] ACPI: Battery Slot [BAT1] (battery present)
[ 3534.812000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 
802.11a channels)
[ 3535.052000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3536.988000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 3547.868000] eth1: no IPv6 routers present
[ 3565.792000] eth1: no IPv6 routers present


 cat /proc/interrupts
           CPU0       CPU1       
  0:     604168     850948   IO-APIC-edge      timer
  1:       4229          0   IO-APIC-edge      i8042
  8:         14          0   IO-APIC-edge      rtc
  9:     242546     249410   IO-APIC-fasteoi   acpi
 12:       9246          0   IO-APIC-edge      i8042
 14:      13608          0   IO-APIC-edge      libata
 15:      62437          0   IO-APIC-edge      libata
 16:     224978          0   IO-APIC-fasteoi   ohci1394, yenta, tifm_7xx1, 
sdhci:slot0, ipw3945
 17:     341858          0   IO-APIC-fasteoi   uhci_hcd:usb5, [EMAIL 
PROTECTED]:0000:00:02.0
 18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
 19:          4          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 20:     102086          0   IO-APIC-fasteoi   uhci_hcd:usb3
 21:       2904          0   IO-APIC-fasteoi   eth0
 22:       8426          0   IO-APIC-fasteoi   HDA Intel
NMI:          0          0 
LOC:    1454517    1453820 
ERR:          0
MIS:          0

** Affects: linux-source-2.6.20 (Ubuntu)
     Importance: Undecided
         Status: Unconfirmed

-- 
No sound on Toshiba Laptop P105 S6024 (HDA intel ich7 rev 2)
https://bugs.launchpad.net/bugs/114306
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to