Hi

I also have the bug in same N150 configuration running 11.10 (Oneiric
Ocelot). I did find the following link to a possible 'workaround'
(although I am not confident enough to implement change in case
it has knock on effects) :-
http://www.kickenhardware.net/showthread.php?19337-Fix-for-wireless- 
on-Samsung-N150-netbook

Thought I would leave note in case it is of value to whoever is
looking into bug.

John


On 16 Oct 2011, at 10:31, Richard Dawe wrote:

> In comment #19, I should have also said that I'm running 11.10  
> (Oneiric
> Ocelot).
>
> -- 
> You received this bug notification because you are subscribed to  
> the bug
> report.
> https://bugs.launchpad.net/bugs/708712
>
> Title:
>   Wireless Card RTL819Xe on a Samsung N150 netbook
>
> Status in NULL Project:
>   Invalid
> Status in “linux” package in Ubuntu:
>   Confirmed
>
> Bug description:
>   This card works intermittently and follows a set sequence.
>
>   1. On 1st boot the card comes up as disabled.
>   2. On second boot the card comes up as enabled but will not  
> connect to the wireless network, although it can see the network.
>   3. On third boot the card works O.K.
>
>    Here is the output of dmesg on first Boot.
>
>   =========================================
>   [   22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level,  
> low) -> IRQ 16
>   [   22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
>   [   23.000709] WARNING: at /build/buildd/linux-2.6.37/include/ 
> linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
>   [   23.000842]  [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   23.000870]  [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   23.000912]  [<f8648679>] rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   23.001158]  [<f83390a3>] rtl8192_pci_module_init+0xa3/0xb4  
> [r8192e_pci]
>   [   23.001197]  [<f8339000>] ? rtl8192_pci_module_init+0x0/0xb4  
> [r8192e_pci]
>   [   23.717668] rtllib_crypt: registered algorithm 'NULL'
>   [   23.717678] rtllib_crypt: registered algorithm 'TKIP'
>   [   23.717685] rtllib_crypt: registered algorithm 'CCMP'
>   [   23.717691] rtllib_crypt: registered algorithm 'WEP'
>   [   24.808336] rtl819xE:ERR in CPUcheck_firmware_ready()
>   [   24.808349] rtl819xE:ERR in init_firmware()
>   [   24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is  
> failed!
>
>   ===================================================
>
>   Here is output of dmesg on Second boot
>
>   =====================================================
>   [   22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level,  
> low) -> IRQ 16
>   [   22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
>   [   22.405211] WARNING: at /build/buildd/linux-2.6.37/include/ 
> linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
>   [   22.405349]  [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   22.405377]  [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   22.405414]  [<f8570679>] rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   22.405685]  [<f82750a3>] rtl8192_pci_module_init+0xa3/0xb4  
> [r8192e_pci]
>   [   22.405723]  [<f8275000>] ? rtl8192_pci_module_init+0x0/0xb4  
> [r8192e_pci]
>   [   22.907988] rtllib_crypt: registered algorithm 'NULL'
>   [   22.909972] rtllib_crypt: registered algorithm 'TKIP'
>   [   22.909982] rtllib_crypt: registered algorithm 'CCMP'
>   [   22.909989] rtllib_crypt: registered algorithm 'WEP'
>   [   52.276380] rtl819xE:ERR in CPUcheck_firmware_ready()
>   [   52.276391] rtl819xE:ERR in init_firmware()
>   [   52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization  
> is failed!
>   [   70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>   [   71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
>
>   =====================================================
>
>   Here is output of device in dmsg on third boot
>
>   ========================================================
>   [   20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level,  
> low) -> IRQ 16
>   [   20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
>   [   20.692093] WARNING: at /build/buildd/linux-2.6.37/include/ 
> linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
>   [   20.692220]  [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   20.692249]  [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   20.692290]  [<f85a6679>] rtl8192_pci_probe+0x2eb/0x3b9  
> [r8192e_pci]
>   [   20.692475]  [<f82740a3>] rtl8192_pci_module_init+0xa3/0xb4  
> [r8192e_pci]
>   [   20.692513]  [<f8274000>] ? rtl8192_pci_module_init+0x0/0xb4  
> [r8192e_pci]
>   [   21.427868] rtllib_crypt: registered algorithm 'NULL'
>   [   21.427880] rtllib_crypt: registered algorithm 'TKIP'
>   [   21.427886] rtllib_crypt: registered algorithm 'CCMP'
>   [   21.427892] rtllib_crypt: registered algorithm 'WEP'
>   [   25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>   [   25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82  
> qidx=6!!!
>
>   ========================================================
>   ---
>   Architecture: i386
>   DistroRelease: Ubuntu 11.04
>   InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" -  
> Release i386 (20101007)
>   Package: linux (not installed)
>   ProcEnviron:
>    LANGUAGE=en_GB:en
>    LANG=en_GB.UTF-8
>    LC_MESSAGES=en_GB.utf8
>    SHELL=/bin/bash
>   ProcVersionSignature: Ubuntu 2.6.38-1.28-generic 2.6.38-rc2
>   Regression: Yes
>   Tags: natty running-unity
>   Uname: Linux 2.6.38-1-generic i686
>   UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
>
>   ---
>   Architecture: i386
>   DistroRelease: Ubuntu 11.04
>   InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" -  
> Release i386 (20101007)
>   Package: linux (not installed)
>   ProcEnviron:
>    LANGUAGE=en_GB:en
>    LANG=en_GB.UTF-8
>    LC_MESSAGES=en_GB.utf8
>    SHELL=/bin/bash
>   ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4
>   Regression: Yes
>   Tags: natty running-unity
>   Uname: Linux 2.6.38-3-generic i686
>   UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/null/+bug/708712/+subscriptions

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/708712

Title:
  Wireless Card RTL819Xe on a Samsung N150 netbook

To manage notifications about this bug go to:
https://bugs.launchpad.net/null/+bug/708712/+subscriptions

-- 
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to