Im sorry neither kernel 3.1rc9 nor 3.1.daily (3.1.0-999.201110171146) did solve the problem
As I've written I've tried too latest v4l git. So either the problem is in v4l itself - wrong frontend selected - or somewhere else. As I've googled in the meanwhile i2c errors are serious, and are not related to udev (which was my faulty guess). So - as the usb id's for the device are correct - I believe now that something inside v4l goes wrong. I investigate further to find out the mystery. BTW. another user is affected see : http://forum.ubuntuusers.de/topic/dvb-t-stick-wird-von-kaffeine-nicht- mehr-erkannt/ (regards, german only) dmesg ouputs: 3.1 rc9 196.420024] usb 1-7: new high speed USB device number 6 using ehci_hcd [ 196.553236] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware [ 196.555478] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 196.757006] dib0700: firmware started successfully. [ 197.260148] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. [ 197.260220] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 197.260268] DVB: registering new adapter (Hauppauge Nova-T Stick) [ 197.313106] dib0700: stk7070p_frontend_attach: dib7000p_i2c_enumeration failed. Cannot continue [ 197.313109] [ 197.313114] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick' [ 197.313122] Registered IR keymap rc-dib0700-rc5 [ 197.313280] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1/input7 [ 197.313351] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1 [ 197.313479] dvb-usb: schedule remote query interval to 50 msecs. [ 197.313483] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. 3.1 daily [ 61.092040] usb 1-7: new high speed USB device number 6 using ehci_hcd [ 61.225319] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware [ 61.230325] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw' [ 61.432167] dib0700: firmware started successfully. [ 61.936187] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. [ 61.936259] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 61.936430] DVB: registering new adapter (Hauppauge Nova-T Stick) [ 61.986123] dib0700: stk7070p_frontend_attach: dib7000p_i2c_enumeration failed. Cannot continue [ 61.986126] [ 61.986131] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick' [ 61.986140] Registered IR keymap rc-dib0700-rc5 [ 61.986314] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1/input7 [ 61.986376] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1 [ 61.986574] dvb-usb: schedule remote query interval to 50 msecs. [ 61.986578] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. ** Tags removed: apport-collected needs-upstream-testing oneiric regression-release running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/873247 Title: 11.10 wintv-nova t regression To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/873247/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
