I appear to have the same issue on my HP DV6207tx
http://h10010.www1.hp.com/wwpc/au/en/ho/WF06b/1090709-1116637-1116665-1116665-1116665-12924872-78168553.html?jumpid=reg_R1002_AUEN
-----------------------------------------------------------------------------------------------------------------------------
[EMAIL PROTECTED]:~$ /usr/lib/nautilus-cd-burner/list_cddrives
Drive:
name: DVDRAM GSA-4084N
device: /dev/scd0
door: closed
type: CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+R DL,
DVD+RW, CD, DVD
is mounted: FALSE
max read speed: 4234 KiB/s (CD 28.2x, DVD 3.1x)
max write speed: 4234 KiB/s (CD 28.2x, DVD 3.1x)
write speeds: 4234 KiB/s (CD 28.2x, DVD 3.1x)
2822 KiB/s (CD 18.8x, DVD 2.0x)
1764 KiB/s (CD 11.7x, DVD 1.3x)
706 KiB/s (CD 4.7x, DVD 0.5x)
Media:
label: ''
type: CD-R (blank)
is writable: TRUE
is appendable: FALSE
capacity: 701.00 MiB approx. or 80 mins 0 secs
size: 0.00 MiB approx. or 0 mins 0 secs
-----------------------------------------------------------------------------------------------------------------------------
A typical gnomebaker/wodim session gives:
-----------------------------------------------------------------------------------------------------------------------------
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '4,0,0'
scsibus: 4 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4084N'
Revision : 'KQ09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 9268 kB/s 52x CD 6x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 2822 KB/s
4 seconds. 3 seconds. 2
seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 02 2E 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 40s
wodim: The current problem looks like a buffer underrun.
wodim: It looks like 'driveropts=burnfree' does not work for this drive.
wodim: Please report.
wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 1142784 bytes
Writing time: 12.100s
Average write speed 204.9x.
Min drive buffer fill was 98%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 28.572s
-----------------------------------------------------------------------------------------------------------------------------
At present I cannot burn on any media.
--
Burner not working in 7,04
https://bugs.launchpad.net/bugs/114122
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
