GHi Ben,
With the help of somebody else (Dean Gaudet) I got to extract the
dmesg from my vm. He told me to redirect the output of the console to
a file. Here is my dmesg:
[ 0.000000] Linux version 2.6.22-3-generic ([EMAIL PROTECTED]) (gcc
version 4.1.3 20070429 (prerelease) (Ubuntu 4.1.2-5ubuntu3)) #1 SMP
Tue May 15 05:47:48 GMT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000
(reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
[ 0.000000] BIOS-e820: 000000000fef0000 - 000000000fefc000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000000fefc000 - 000000000ff00000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000
(reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6ce0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65536
[ 0.000000] HighMem 65536 -> 65536
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65536
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6C70, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 0FEF7C02, 0030 (r1 PTLTD RSDT 6040000
LTP 0)
[ 0.000000] ACPI: FACP 0FEFBF14, 0074 (r1 INTEL 440BX 6040000
PTL F4240)
[ 0.000000] ACPI: DSDT 0FEF7C32, 42E2 (r1 PTLTD Custom 6040000
MSFT 100000D)
[ 0.000000] ACPI: FACS 0FEFCFC0, 0040
[ 0.000000] ACPI: APIC 0FEFBF88, 0050 (r1 PTLTD APIC 6040000
LTP 0)
[ 0.000000] ACPI: BOOT 0FEFBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000
LTP 1)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 17
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high
edge)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
10000000:eec00000)
[ 0.000000] Built 1 zonelists. Total pages: 65024
[ 0.000000] Kernel command line:
root=UUID=faba4d18-e6e2-435b-b507-2663b6696949 ro single
console=ttyS0,115200
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 799.414 MHz processor.
[ 55.414907] Console: colour VGA+ 80x25
[ 55.415766] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 55.416603] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 55.417461] Memory: 249200k/262144k available (2036k kernel code,
12396k reserved, 927k data, 340k init, 0k highmem)
[ 55.417549] virtual kernel memory layout:
[ 55.417556] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 55.417560] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 55.417563] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 55.417566] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 55.417569] .init : 0xc03eb000 - 0xc0440000 ( 340 kB)
[ 55.417572] .data : 0xc02fd0ab - 0xc03e5074 ( 927 kB)
[ 55.417575] .text : 0xc0100000 - 0xc02fd0ab (2036 kB)
[ 55.417651] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 55.499632] Calibrating delay using timer specific routine..
1620.58 BogoMIPS (lpj=3241174)
[ 55.499694] Security Framework v1.0.0 initialized
[ 55.499757] SELinux: Disabled at boot.
[ 55.499819] Mount-cache hash table entries: 512
[ 55.499944] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 55.500007] CPU: L2 cache: 2048K
[ 55.500132] Compat vDSO mapped to ffffe000.
[ 55.500194] Checking 'hlt' instruction... OK.
[ 55.514666] SMP alternatives: switching to UP code
[ 55.514729] Freeing SMP alternatives: 11k freed
[ 55.514791] ACPI: Core revision 20070126
[ 55.515104] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz
stepping 08
[ 55.515229] Total of 1 processors activated (1620.58 BogoMIPS).
[ 55.515292] ENABLING IO-APIC IRQs
[ 55.515517] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 55.664864] APIC calibration not consistent with PM Timer: 101ms
instead of 100ms
[ 55.664920] APIC delta adjusted to PM-Timer: 412491 (420724)
[ 55.683063] Brought up 1 CPUs
[ 55.718850] Time: 9:35:27 Date: 04/17/107
[ 55.726329] NET: Registered protocol family 16
[ 55.759503] EISA bus registered
[ 55.762906] ACPI: bus type pci registered
[ 55.767091] PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
[ 55.767169] PCI: Using configuration type 1
[ 55.767232] Setting up standard PCI resources
[ 55.867061] ACPI: Interpreter enabled
[ 55.867119] ACPI: (supports S0 S1 S5)
[ 55.867542] ACPI: Using IOAPIC for interrupt routing
[ 56.095310] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 56.131385] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 56.131489] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 56.194614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11
14 15) *0, disabled.
[ 56.195205] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11
14 15)
[ 56.195496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11
14 15)
[ 56.198420] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11
14 15)
[ 56.199031] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 56.199109] pnp: PnP ACPI init
[ 56.199261] ACPI: bus type pnp registered
[ 56.506332] pnp: PnP ACPI: found 12 devices
[ 56.506435] ACPI: ACPI bus type pnp unregistered
[ 56.506541] PnPBIOS: Disabled by ACPI PNP
[ 56.507333] PCI: Using ACPI for IRQ routing
[ 56.507465] PCI: If a device doesn't work, try "pci=routeirq". If
it helps, post a report
[ 56.619032] NET: Registered protocol family 8
[ 56.619063] NET: Registered protocol family 20
[ 56.622538] Time: tsc clocksource has been installed.
[ 56.664517] PCI: Bridge: 0000:00:01.0
[ 56.664555] IO window: disabled.
[ 56.664617] MEM window: disabled.
[ 56.664680] PREFETCH window: disabled.
[ 56.664805] NET: Registered protocol family 2
[ 56.702343] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 56.702406] TCP established hash table entries: 8192 (order: 4, 98304
bytes)
[ 56.702468] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 56.702531] TCP: Hash tables configured (established 8192 bind 8192)
[ 56.702593] TCP reno registered
[ 56.730328] checking if image is initramfs... it is
[ 57.166408] Switched to high resolution mode on CPU 0
[ 57.485657] Freeing initrd memory: 6241k freed
[ 57.485777] Simple Boot Flag at 0x36 set to 0x1
[ 57.486625] audit: initializing netlink socket (disabled)
[ 57.486638] audit(1179394513.304:1): initialized
[ 57.487021] VFS: Disk quotas dquot_6.5.1
[ 57.487033] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 57.489627] io scheduler noop registered
[ 57.489639] io scheduler anticipatory registered
[ 57.489652] io scheduler deadline registered
[ 57.489664] io scheduler cfq registered (default)
[ 57.489677] Limiting direct PCI/PCI transfers.
[ 57.490078] isapnp: Scanning for PnP cards...
[ 57.850257] isapnp: No Plug & Play device found
[ 57.903605] Real Time Clock Driver v1.12ac
[ 57.903785] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 57.905388] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 58.025677] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 58.028019] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 58.033285] input: Macintosh mouse button emulation as
/class/input/input0
[ 58.034444] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 58.035524] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 58.037435] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at
0x60,0x64 irq 1,12
[ 58.552777] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 58.553637] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 58.554955] mice: PS/2 mouse device common for all mice
[ 58.557045] EISA: Probing bus 0 at eisa.0
[ 58.557736] Cannot allocate resource for EISA slot 1
[ 58.558583] EISA: Detected 0 cards.
[ 58.560786] TCP cubic registered
[ 58.561349] NET: Registered protocol family 1
[ 58.562093] Using IPI No-Shortcut mode
[ 58.562815] input: AT Translated Set 2 keyboard as
/class/input/input1
[ 58.564856] Magic number: 7:253:576
[ 58.565493] hash matches device ptyb8
[ 58.592753] Freeing unused kernel memory: 340k freed
Loading, please wait...
Begin: Loading essential drivers... ...
[ 58.956949] Capability LSM initialized
Done.
Begin: Running /scripts/init-premount ...
[ 58.996464] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 58.997549] ACPI Exception (processor_core-0781): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 58.999220] ACPI Exception (processor_core-0781): AE_NOT_FOUND,
Processor Device is not present [20070126]
[ 59.001083] ACPI Exception (processor_core-0781): AE_NOT_FOUND,
Processor Device is not present [20070126]
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[ 59.280205] SCSI subsystem initialized
[ 59.296274] scsi0 : ata_piix
[ 59.296882] scsi1 : ata_piix
[ 59.297418] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6
bmdma 0x00011050 irq 14
[ 59.298769] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376
bmdma 0x00011058 irq 15
[ 59.308407] usbcore: registered new interface driver usbfs
[ 59.309337] usbcore: registered new interface driver hub
[ 59.310343] usbcore: registered new device driver usb
[ 59.324251] USB Universal Host Controller Interface driver v3.0
[ 59.344279] Fusion MPT base driver 3.04.04
[ 59.344982] Copyright (c) 1999-2007 LSI Logic Corporation
[ 59.348394] Fusion MPT SPI Host driver 3.04.04
[ 59.364594] pcnet32.c:v1.33 27.Jun.2006 [EMAIL PROTECTED]
[ 59.548120] Floppy drive(s): fd0 is 1.44M
[ 59.568095] FDC 0 is a post-1991 82077
[ 59.632322] ata2.00: ATAPI, max UDMA/33
[ 59.792124] ata2.00: configured for UDMA/33
[ 59.840191] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW
TS-L632D DE03 PQ: 0 ANSI: 5
[ 59.843862] ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level,
low) -> IRQ 16
[ 59.845278] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 59.851772] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
[ 59.853158] uhci_hcd 0000:00:07.2: irq 16, io base 0x00001060
[ 59.859784] usb usb1: configuration #1 chosen from 1 choice
[ 59.860851] hub 1-0:1.0: USB hub found
[ 59.861574] hub 1-0:1.0: 2 ports detected
[ 59.963988] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 59.965404] mptbase: Initiating ioc0 bringup
[ 60.035648] ioc0: 53C1030: Capabilities={Initiator}
[ 60.111699] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
tray
[ 60.112976] Uniform CD-ROM driver Revision: 3.20
[ 60.131874] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 60.175623] scsi2 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1,
MaxQ=128, IRQ=17
[ 60.203647] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 60.204860] ata2.00: (BMDMA stat 0x26)
[ 60.205582] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 60.205594] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 60.291603] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level,
low) -> IRQ 18
[ 60.293020] pcnet32: PCnet/PCI II 79C970A at 0x1400, 00 0c 29 49 53
95 assigned IRQ 18.
[ 60.299415] eth0: registered as PCnet/PCI II 79C970A
[ 60.300368] pcnet32: 1 cards_found.
[ 60.519575] ata2.00: configured for UDMA/33
[ 60.520376] ata2: EH complete
[ 60.547254] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 60.548467] ata2.00: (BMDMA stat 0x26)
[ 60.549188] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 60.549199] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 60.863222] ata2.00: configured for UDMA/33
[ 60.864024] ata2: EH complete
[ 60.947749] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 60.948963] ata2.00: (BMDMA stat 0x26)
[ 60.949684] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 60.949695] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 61.262909] ata2.00: configured for UDMA/33
[ 61.263710] ata2: EH complete
[ 61.355782] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.356977] ata2.00: (BMDMA stat 0x26)
[ 61.357698] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 61.357709] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 61.670609] ata2.00: configured for UDMA/33
[ 61.671423] ata2: EH complete
[ 61.763351] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.764564] ata2.00: (BMDMA stat 0x26)
[ 61.765285] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 61.765296] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 62.078271] ata2.00: configured for UDMA/33
[ 62.079073] ata2: EH complete
[ 62.158100] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 62.159311] ata2.00: (BMDMA stat 0x26)
[ 62.160029] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 62.160040] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 62.474054] ata2.00: configured for UDMA/33
[ 62.474826] ata2: EH complete
[ 62.493770] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 62.494984] ata2.00: (BMDMA stat 0x26)
[ 62.495703] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 62.495714] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 62.809737] ata2.00: configured for UDMA/33
[ 62.810537] ata2: EH complete
[ 62.881418] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 62.882631] ata2.00: (BMDMA stat 0x26)
[ 62.883351] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 62.883363] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 63.197376] ata2.00: configured for UDMA/33
[ 63.198189] ata2: EH complete
[ 63.282223] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 63.283434] ata2.00: (BMDMA stat 0x26)
[ 63.284152] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 63.284162] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 63.597076] ata2.00: configured for UDMA/33
[ 63.597877] ata2: EH complete
[ 63.685287] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 63.686478] ata2.00: (BMDMA stat 0x26)
[ 63.687197] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 63.687208] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 64.000749] ata2.00: configured for UDMA/33
[ 64.001550] ata2: EH complete
[ 64.093620] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.094833] ata2.00: (BMDMA stat 0x26)
[ 64.095552] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 64.095563] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 64.408441] ata2.00: configured for UDMA/33
[ 64.409249] ata2: EH complete
[ 64.501243] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.502454] ata2.00: (BMDMA stat 0x26)
[ 64.503176] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 64.503187] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 64.816101] ata2.00: configured for UDMA/33
[ 64.816914] ata2: EH complete
[ 64.908956] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.910171] ata2.00: (BMDMA stat 0x26)
[ 64.912401] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 64.912413] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 65.223790] ata2.00: configured for UDMA/33
[ 65.224594] ata2: EH complete
[ 65.316673] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 65.317885] ata2.00: (BMDMA stat 0x26)
[ 65.318610] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 65.318622] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 65.631459] ata2.00: configured for UDMA/33
[ 65.632260] ata2: EH complete
[ 65.655291] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 65.656503] ata2.00: (BMDMA stat 0x26)
[ 65.657223] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 65.657233] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 65.971252] ata2.00: configured for UDMA/33
[ 65.972052] ata2: EH complete
[ 66.034931] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 66.036142] ata2.00: (BMDMA stat 0x26)
[ 66.036865] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 66.036876] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 66.350914] ata2.00: configured for UDMA/33
[ 66.351730] ata2: EH complete
[ 66.434609] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 66.435817] ata2.00: (BMDMA stat 0x26)
[ 66.436514] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 66.436525] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 66.750580] ata2.00: configured for UDMA/33
[ 66.751381] ata2: EH complete
[ 66.838285] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 66.839477] ata2.00: (BMDMA stat 0x26)
[ 66.840198] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 66.840209] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 67.154263] ata2.00: configured for UDMA/33
[ 67.155063] ata2: EH complete
[ 67.239151] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 67.240363] ata2.00: (BMDMA stat 0x26)
[ 67.241082] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 67.241093] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 67.553945] ata2.00: configured for UDMA/33
[ 67.554746] ata2: EH complete
[ 67.642569] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 67.643769] ata2.00: (BMDMA stat 0x26)
[ 67.644489] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 67.644500] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 67.957625] ata2.00: configured for UDMA/33
[ 67.958438] ata2: EH complete
[ 68.149249] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 68.150464] ata2.00: (BMDMA stat 0x26)
[ 68.151184] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 68.151195] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 68.465224] ata2.00: configured for UDMA/33
[ 68.466026] ata2: EH complete
[ 68.552918] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 68.554132] ata2.00: (BMDMA stat 0x26)
[ 68.554833] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 68.554843] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 68.868909] ata2.00: configured for UDMA/33
[ 68.869708] ata2: EH complete
[ 68.956614] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 68.957815] ata2.00: (BMDMA stat 0x26)
[ 68.958535] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 68.958546] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 69.284800] ata2.00: configured for UDMA/33
[ 69.294613] ata2: EH complete
[ 69.430100] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 69.443884] ata2.00: (BMDMA stat 0x26)
[ 69.453982] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 69.453990] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 69.809278] ata2.00: configured for UDMA/33
[ 69.818505] ata2: EH complete
[ 69.921645] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 69.936034] ata2.00: (BMDMA stat 0x26)
[ 69.945368] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 69.945376] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 70.318261] ata2.00: configured for UDMA/33
[ 70.329211] ata2: EH complete
[ 70.451591] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 70.466453] ata2.00: (BMDMA stat 0x26)
[ 70.473660] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 70.473668] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 70.819809] ata2.00: configured for UDMA/33
[ 70.829693] ata2: EH complete
[ 70.899358] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 70.914506] ata2.00: (BMDMA stat 0x26)
[ 70.921469] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 70.921476] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 71.272391] ata2.00: configured for UDMA/33
[ 71.284088] ata2: EH complete
[ 71.378804] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 71.393858] ata2.00: (BMDMA stat 0x26)
[ 71.401015] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x43 data 12 in
[ 71.401023] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 71.751105] ata2.00: configured for UDMA/33
[ 71.763831] ata2: EH complete
[ 71.880196] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 71.893876] ata2.00: (BMDMA stat 0x26)
[ 71.904282] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 71.904290] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 72.251512] ata2.00: configured for UDMA/33
[ 72.260586] ata2: EH complete
[ 72.370692] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 72.385734] ata2.00: (BMDMA stat 0x26)
[ 72.392384] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 72.392392] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 72.750220] ata2.00: configured for UDMA/33
[ 72.760160] ata2: EH complete
[ 72.882381] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 72.896766] ata2.00: (BMDMA stat 0x26)
[ 72.906741] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 72.906749] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 73.250965] ata2.00: configured for UDMA/33
[ 73.262546] ata2: EH complete
[ 73.353933] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 73.368337] ata2.00: (BMDMA stat 0x26)
[ 73.375389] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 73.375397] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 73.737591] ata2.00: configured for UDMA/33
[ 73.747240] ata2: EH complete
[ 73.874493] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 73.888906] ata2.00: (BMDMA stat 0x26)
[ 73.898049] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 73.898057] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 74.244881] ata2.00: configured for UDMA/33
[ 74.258079] ata2: EH complete
[ 74.383017] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 74.396325] ata2.00: (BMDMA stat 0x26)
[ 74.405824] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 74.405831] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 74.758452] ata2.00: configured for UDMA/33
[ 74.769571] ata2: EH complete
[ 74.856510] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 74.871285] ata2.00: (BMDMA stat 0x26)
[ 74.878271] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 74.878278] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 75.228323] ata2.00: configured for UDMA/33
[ 75.238159] ata2: EH complete
[ 75.350122] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 75.363850] ata2.00: (BMDMA stat 0x26)
[ 75.372938] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 75.372946] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 75.715811] ata2.00: configured for UDMA/33
[ 75.725685] ata2: EH complete
[ 75.824214] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 75.838712] ata2.00: (BMDMA stat 0x26)
[ 75.845641] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 75.845648] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 76.195444] ata2.00: configured for UDMA/33
[ 76.205305] ata2: EH complete
[ 76.319097] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 76.333980] ata2.00: (BMDMA stat 0x26)
[ 76.344104] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 76.344112] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 76.692255] ata2.00: configured for UDMA/33
[ 76.703854] ata2: EH complete
[ 76.803781] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 76.818131] ata2.00: (BMDMA stat 0x26)
[ 76.824832] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 76.824839] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 77.175281] ata2.00: configured for UDMA/33
[ 77.184704] ata2: EH complete
[ 77.298843] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 77.313638] ata2.00: (BMDMA stat 0x26)
[ 77.323150] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0
cdb 0x25 data 8 in
[ 77.323158] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask
0x20 (host bus error)
[ 77.663289] ata2.00: configured for UDMA/33
[ 77.675135] ata2: EH complete
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls /dev
ALERT! /dev/disk/by-uuid/faba4d18-e6e2-435b-b507-2663b6696949 does not
exist. Dropping to a shell!
BusyBox v1.1.3 (Debian 1:1.1.3-4ubuntu2) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
2007/5/16, Ben Collins <[EMAIL PROTECTED]>:
> Well, I tried to reproduce this, but I can't. Granted, I'm using
> Workstation 6, but I tried both the IDE and SCSI drives on this guest
> with latest kernel, and they just worked.
>
> Going t)o have to rely on you for that dmesg output.
>
> ** Summary changed:
>
> - drop to initramfs with linux-image-2.6.22-1.5
> + IDE drive not detected under VMware WS5
>
> --
> IDE drive not detected under VMware WS5
> https://bugs.launchpad.net/bugs/112860
> You received this bug notification because you are a direct subscriber
> of the bug.
>
--
IDE drive not detected under VMware WS5
https://bugs.launchpad.net/bugs/112860
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
