apport information ** Tags added: apport-collected oneiric staging
** Description changed: Executed xrandr --output $display --rotate left Screen rotated properly, touchscreen coordinate system did not rotate with display. output from xrandr --verbose [displaying only Cando config] Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (0x47) normal (normal left inverted right x axis y axis) 256mm x 144mm Identifier: 0x41 Timestamp: 4098802 Subpixel: horizontal rgb Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: EDID: 00ffffffffffff0030e4bf0200000000 00140103801a0e780a05959559568c28 20505400000001010101010101010101 0101010101011c1b5684500007301214 130000901000001b0000000000000000 00000000000000000000000000fe004c 4720446973706c61790a2020000000fe 004c503131365748322d544c4e3100dd BACKLIGHT: 4 (0x00000004) range: (0,9) Backlight: 4 (0x00000004) range: (0,9) scaling mode: Full aspect supported: None Full Center Full aspect 1366x768 (0x47) 69.4MHz +HSync -VSync *current +preferred h: width 1366 start 1384 end 1404 total 1498 skew 0 clock 46.3KHz v: height 768 start 769 end 772 total 775 clock 59.8Hz 1360x768 (0x48) 84.8MHz -HSync +VSync h: width 1360 start 1432 end 1568 total 1776 skew 0 clock 47.7KHz v: height 768 start 771 end 781 total 798 clock 59.8Hz 1360x768 (0x49) 72.0MHz +HSync -VSync h: width 1360 start 1408 end 1440 total 1520 skew 0 clock 47.4KHz v: height 768 start 771 end 781 total 790 clock 60.0Hz 1024x768 (0x4a) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x4b) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x4c) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x4d) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. + ApportVersion: 1.23-0ubuntu3 + Architecture: amd64 + ArecordDevices: + **** List of CAPTURE Hardware Devices **** + card 0: Intel [HDA Intel], device 0: ALC269 Analog [ALC269 Analog] + Subdevices: 1/1 + Subdevice #0: subdevice #0 + AudioDevicesInUse: + USER PID ACCESS COMMAND + /dev/snd/controlC0: ananda 3529 F.... pulseaudio + CRDA: Error: [Errno 2] No such file or directory + Card0.Amixer.info: + Card hw:0 'Intel'/'HDA Intel at 0xbc400000 irq 43' + Mixer name : 'Intel IbexPeak HDMI' + Components : 'HDA:10ec0269,14581100,00100004 HDA:80862804,80860101,00100000' + Controls : 20 + Simple ctrls : 12 + DistroRelease: Ubuntu 11.10 + HibernationDevice: RESUME=UUID=90201017-cf44-452b-9b74-d5475ec5f0fc + InstallationMedia: Ubuntu 10.04.3 LTS "Lucid Lynx" - Release amd64 (20110720.1) + MachineType: GIGABYTE T1125 + Package: linux (not installed) + ProcEnviron: + PATH=(custom, no user) + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=caaa240a-ee8f-492f-8928-13ff1443639d ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 + PulseSinks: + Error: command ['pacmd', 'list-sinks'] failed with exit code 1: Home directory /home/ananda not ours. + No PulseAudio daemon running, or not running as session daemon. + PulseSources: + Error: command ['pacmd', 'list-sources'] failed with exit code 1: Home directory /home/ananda not ours. + No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-3.0.0-12-generic N/A + linux-backports-modules-3.0.0-12-generic N/A + linux-firmware 1.60 + StagingDrivers: mei + Tags: oneiric staging + Uname: Linux 3.0.0-12-generic x86_64 + UpgradeStatus: Upgraded to oneiric on 2011-10-27 (11 days ago) + UserGroups: + + dmi.bios.date: 05/18/2011 + dmi.bios.vendor: INSYDE + dmi.bios.version: F12 + dmi.board.asset.tag: Base Board Asset Tag + dmi.board.name: T1125 + dmi.board.vendor: GIGABYTE + dmi.board.version: Base Board Version + dmi.chassis.asset.tag: Chassis Asset Tag + dmi.chassis.type: 1 + dmi.chassis.vendor: Chassis Manufacturer + dmi.chassis.version: Chassis Version + dmi.modalias: dmi:bvnINSYDE:bvrF12:bd05/18/2011:svnGIGABYTE:pnT1125:pvrF12:rvnGIGABYTE:rnT1125:rvrBaseBoardVersion:cvnChassisManufacturer:ct1:cvrChassisVersion: + dmi.product.name: T1125 + dmi.product.version: F12 + dmi.sys.vendor: GIGABYTE ** Attachment added: "AcpiTables.txt" https://bugs.launchpad.net/bugs/882866/+attachment/2588912/+files/AcpiTables.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/882866 Title: Gigabyte T1125N Cando Touchscreen Rotation Coordinate Fail To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/882866/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs