My dmesg output: [ 0.000000] Linux version 2.6.20-15-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic) [ 0.000000] Command line: root=UUID=5840460c-8b00-4977-a58e-725a2ded6e0c ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7f80 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3040 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee94c0 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee9400 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 1 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fee0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 524000) 1 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Using node hash shift of 63 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524000 [ 0.000000] On node 0 totalpages: 523903 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1101 pages reserved [ 0.000000] DMA zone: 2842 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7108 pages used for memmap [ 0.000000] DMA32 zone: 512796 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000 [ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515638 [ 0.000000] Kernel command line: root=UUID=5840460c-8b00-4977-a58e-725a2ded6e0c ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 29.055279] Console: colour VGA+ 80x25 [ 29.056980] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 29.059910] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 29.060906] Checking aperture... [ 29.060911] CPU 0: aperture @ a706000000 size 32 MB [ 29.060913] Aperture too small (32 MB) [ 29.065606] No AGP bridge found [ 29.089747] Memory: 2052052k/2096000k available (2217k kernel code, 43560k reserved, 1162k data, 304k init) [ 29.167929] Calibrating delay using timer specific routine.. 5203.83 BogoMIPS (lpj=10407669) [ 29.167980] Security Framework v1.0.0 initialized [ 29.167988] SELinux: Disabled at boot. [ 29.168009] Mount-cache hash table entries: 256 [ 29.168154] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 29.168156] CPU: L2 Cache: 512K (64 bytes/line) [ 29.168158] CPU 0/0 -> Node 0 [ 29.168179] SMP alternatives: switching to UP code [ 29.168521] Early unpacking initramfs... done [ 29.424952] ACPI: Core revision 20060707 [ 29.427244] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 29.471655] Using local APIC timer interrupts. [ 29.510036] result 16252414 [ 29.510038] Detected 16.252 MHz APIC timer. [ 29.511292] Brought up 1 CPUs [ 29.511331] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 29.511333] time.c: Detected 2600.383 MHz processor. [ 29.511580] Time: 21:39:35 Date: 04/17/107 [ 29.511616] NET: Registered protocol family 16 [ 29.511692] ACPI: bus type pci registered [ 29.511698] PCI: Using configuration type 1 [ 29.517891] ACPI: Interpreter enabled [ 29.517894] ACPI: Using IOAPIC for interrupt routing [ 29.518336] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 29.518340] PCI: Probing PCI hardware (bus 00) [ 29.520280] PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling [ 29.520398] PCI: Transparent bridge - 0000:00:09.0 [ 29.520576] Boot video device is 0000:05:00.0 [ 29.520626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 29.576748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 29.578315] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 29.578559] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 29.578806] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 29.579053] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.579306] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.579549] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 29.579790] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.580035] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 29.580280] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.580522] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.580770] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 29.581015] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 29.581258] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.581509] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 29.581761] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 29.582013] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 29.582295] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 29.582573] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 29.582848] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 29.583134] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 29.583343] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 29.583633] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 29.583918] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 29.584204] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 29.584492] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 29.584778] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 29.585064] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 29.585350] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 29.585634] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 29.585929] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 29.586221] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 29.586519] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 29.588288] Linux Plug and Play Support v0.97 (c) Adam Belay [ 29.588302] pnp: PnP ACPI init [ 29.593012] pnp: PnP ACPI: found 10 devices [ 29.593065] PCI: Using ACPI for IRQ routing [ 29.593068] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 29.593139] NET: Registered protocol family 8 [ 29.593141] NET: Registered protocol family 20 [ 29.593541] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved [ 29.593544] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved [ 29.593546] pnp: 00:01: ioport range 0x4400-0x447f has been reserved [ 29.593549] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved [ 29.593551] pnp: 00:01: ioport range 0x4800-0x487f has been reserved [ 29.593553] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved [ 29.593771] PCI: Bridge: 0000:00:09.0 [ 29.593773] IO window: b000-bfff [ 29.593776] MEM window: fdc00000-fdefffff [ 29.593778] PREFETCH window: fdf00000-fdffffff [ 29.593780] PCI: Bridge: 0000:00:0b.0 [ 29.593782] IO window: a000-afff [ 29.593784] MEM window: fdb00000-fdbfffff [ 29.593786] PREFETCH window: fda00000-fdafffff [ 29.593788] PCI: Bridge: 0000:00:0c.0 [ 29.593790] IO window: 9000-9fff [ 29.593792] MEM window: fd900000-fd9fffff [ 29.593794] PREFETCH window: fd800000-fd8fffff [ 29.593796] PCI: Bridge: 0000:00:0d.0 [ 29.593797] IO window: 8000-8fff [ 29.593800] MEM window: fd700000-fd7fffff [ 29.593802] PREFETCH window: fd600000-fd6fffff [ 29.593804] PCI: Bridge: 0000:00:0e.0 [ 29.593806] IO window: 7000-7fff [ 29.593808] MEM window: fa000000-fcffffff [ 29.593810] PREFETCH window: d0000000-dfffffff [ 29.593816] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 29.593823] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 29.593827] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 29.593831] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 29.593835] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 29.593870] NET: Registered protocol family 2 [ 29.631085] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 29.631517] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 29.635489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 29.636489] TCP: Hash tables configured (established 262144 bind 65536) [ 29.636492] TCP reno registered [ 29.647106] checking if image is initramfs... it is [ 30.121012] Freeing initrd memory: 7301k freed [ 30.127652] audit: initializing netlink socket (disabled) [ 30.127666] audit(1179437976.048:1): initialized [ 30.127790] VFS: Disk quotas dquot_6.5.1 [ 30.127806] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 30.127849] io scheduler noop registered [ 30.127851] io scheduler anticipatory registered [ 30.127852] io scheduler deadline registered [ 30.127861] io scheduler cfq registered (default) [ 38.129900] 0000:00:02.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 [ 38.129912] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 38.129918] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.129923] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 38.129929] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.129933] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 38.129939] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.129943] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 38.129949] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 38.130133] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 38.130149] assign_interrupt_mode Found MSI capability [ 38.130153] Allocate Port Service[0000:00:0b.0:pcie00] [ 38.130204] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 38.130219] assign_interrupt_mode Found MSI capability [ 38.130220] Allocate Port Service[0000:00:0c.0:pcie00] [ 38.130262] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 38.130277] assign_interrupt_mode Found MSI capability [ 38.130278] Allocate Port Service[0000:00:0d.0:pcie00] [ 38.130320] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 38.130333] assign_interrupt_mode Found MSI capability [ 38.130335] Allocate Port Service[0000:00:0e.0:pcie00] [ 38.148065] Real Time Clock Driver v1.12ac [ 38.148104] Linux agpgart interface v0.102 (c) Dave Jones [ 38.148106] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 38.148546] mice: PS/2 mouse device common for all mice [ 38.148962] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 38.149170] input: Macintosh mouse button emulation as /class/input/input0 [ 38.149195] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 38.149198] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 38.149376] PNP: No PS/2 controller found. Probing ports directly. [ 38.405730] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 38.405823] TCP cubic registered [ 38.405831] NET: Registered protocol family 1 [ 38.405945] ACPI: (supports S0 S3 S4 S5) [ 38.405987] Magic number: 7:631:702 [ 38.406093] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 38.406168] Freeing unused kernel memory: 304k freed [ 39.555763] Capability LSM initialized [ 39.580709] ACPI: Fan [FAN] (on) [ 39.583344] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 39.584449] ACPI: Thermal Zone [THRM] (36 C) [ 39.993135] usbcore: registered new interface driver usbfs [ 39.993157] usbcore: registered new interface driver hub [ 39.993174] usbcore: registered new device driver usb [ 39.993777] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 39.994196] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 39.994205] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 39.994219] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 39.994222] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 39.994365] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 39.994381] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 40.003101] SCSI subsystem initialized [ 40.007318] libata version 2.20 loaded. [ 40.035553] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. [ 40.044994] ieee1394: Initialized config rom entry `ip1394' [ 40.051677] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI [ 40.051681] e100: Copyright(c) 1999-2006 Intel Corporation [ 40.068331] usb usb1: configuration #1 chosen from 1 choice [ 40.068356] hub 1-0:1.0: USB hub found [ 40.068366] hub 1-0:1.0: 10 ports detected [ 40.145459] Floppy drive(s): fd0 is 1.44M [ 40.174046] sata_nv 0000:00:07.0: version 3.3 [ 40.174510] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 [ 40.174519] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 22 (level, low) -> IRQ 22 [ 40.174529] sata_nv 0000:00:07.0: Using ADMA mode [ 40.174543] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 40.174638] ata1: SATA max UDMA/133 cmd 0xffffc2000002c480 ctl 0xffffc2000002c4a0 bmdma 0x000000000001dc00 irq 22 [ 40.175774] FDC 0 is a post-1991 82077 [ 40.179346] ata2: SATA max UDMA/133 cmd 0xffffc2000002c580 ctl 0xffffc2000002c5a0 bmdma 0x000000000001dc08 irq 22 [ 40.179365] scsi0 : sata_nv [ 40.477176] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 40.493144] ata1: SATA link down (SStatus 0 SControl 300) [ 40.493157] scsi1 : sata_nv [ 40.681023] usb 1-1: configuration #1 chosen from 1 choice [ 40.684008] hub 1-1:1.0: USB hub found [ 40.686959] hub 1-1:1.0: 3 ports detected [ 40.960219] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 40.996231] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 40.996236] ata2.00: ATA-7: ST3250624AS, 3.AAD, max UDMA/133 [ 40.996238] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 41.062741] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 [ 41.062746] ata2.00: configured for UDMA/133 [ 41.063156] scsi 1:0:0:0: Direct-Access ATA ST3250624AS 3.AA PQ: 0 ANSI: 5 [ 41.063163] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 41.063856] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 41.063865] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 41.063875] sata_nv 0000:00:08.0: Using ADMA mode [ 41.063889] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 41.063953] ata3: SATA max UDMA/133 cmd 0xffffc2000002e480 ctl 0xffffc2000002e4a0 bmdma 0x000000000001c800 irq 21 [ 41.063999] ata4: SATA max UDMA/133 cmd 0xffffc2000002e580 ctl 0xffffc2000002e5a0 bmdma 0x000000000001c808 irq 21 [ 41.064010] scsi2 : sata_nv [ 41.111900] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 41.316734] usb 1-2: configuration #1 chosen from 1 choice [ 41.375367] ata3: SATA link down (SStatus 0 SControl 300) [ 41.375384] scsi3 : sata_nv [ 41.552190] usb 1-1.1: new full speed USB device using ohci_hcd and address 4 [ 41.675011] usb 1-1.1: configuration #1 chosen from 1 choice [ 41.684953] usbcore: registered new interface driver hiddev [ 41.686752] ata4: SATA link down (SStatus 0 SControl 300) [ 41.689237] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 41.689256] NFORCE-CK804: chipset revision 242 [ 41.689257] NFORCE-CK804: not 100% native mode: will probe irqs later [ 41.689263] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 41.689271] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 41.689279] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 41.689285] Probing IDE interface ide0... [ 41.700183] input: A4Tech PS/2+USB Mouse as /class/input/input1 [ 41.700198] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:02.0-2 [ 41.705010] input: ABBHOME USB Keyboard as /class/input/input2 [ 41.705027] input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:02.0-1.1 [ 41.712021] input: ABBHOME USB Keyboard as /class/input/input3 [ 41.712055] input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:02.0-1.1 [ 41.712068] usbcore: registered new interface driver usbhid [ 41.712070] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 42.089997] hda: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive [ 42.369433] hdb: Maxtor 6E030L0, ATA DISK drive [ 42.426473] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 42.433051] Probing IDE interface ide1... [ 43.004694] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 43.004705] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 [ 43.004710] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 43.004717] forcedeth: using HIGHDMA [ 43.527417] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:0a.0 [ 43.527789] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 43.527797] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 43.527803] PCI: Setting latency timer of device 0000:01:06.0 to 64 [ 43.581100] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 43.586366] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 43.586372] ACPI: PCI Interrupt 0000:01:09.2[B] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 43.586377] PCI: Setting latency timer of device 0000:01:09.2 to 64 [ 43.638179] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fdefd000-fdefd7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 43.641766] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 43.641828] PCI: Setting latency timer of device 0000:01:08.0 to 64 [ 43.661092] e100: eth1: e100_probe: addr 0xfdefe000, irq 16, MAC addr 00:02:B3:4A:12:E6 [ 43.662098] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 43.662103] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 [ 43.662120] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 43.662123] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 43.662337] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 43.662369] ehci_hcd 0000:00:02.1: debug port 1 [ 43.662372] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 43.662380] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000 [ 43.662385] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 43.662418] usb 1-1: USB disconnect, address 2 [ 43.662419] usb 1-1.1: USB disconnect, address 4 [ 43.662897] usb usb2: configuration #1 chosen from 1 choice [ 43.663068] hub 2-0:1.0: USB hub found [ 43.663077] hub 2-0:1.0: 10 ports detected [ 43.775174] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 43.775377] sda: Write Protect is off [ 43.775379] sda: Mode Sense: 00 3a 00 00 [ 43.775392] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.775441] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 43.775447] sda: Write Protect is off [ 43.775448] sda: Mode Sense: 00 3a 00 00 [ 43.775458] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 43.775460] sda:<6>hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) [ 43.784900] Uniform CD-ROM driver Revision: 3.20 [ 43.796909] sda1 sda2 [ 43.797262] sd 1:0:0:0: Attached scsi disk sda [ 43.801581] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 43.802507] usb 1-2: USB disconnect, address 3 [ 43.899665] hdb: max request size: 128KiB [ 43.899780] hdb: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(133) [ 43.899887] hdb: cache flushes supported [ 43.899907] hdb: hdb1 hdb2 [ 44.111001] Attempting manual resume [ 44.111005] swsusp: Resume From Partition 3:66 [ 44.111006] PM: Checking swsusp image. [ 44.111122] PM: Resume from disk failed. [ 44.117945] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal [ 44.117955] ReiserFS: hdb1: using ordered data mode [ 44.143107] ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 44.145101] ReiserFS: hdb1: checking transaction log (hdb1) [ 44.201332] ReiserFS: hdb1: Using r5 hash to sort names [ 44.600877] usb 1-1: new full speed USB device using ohci_hcd and address 5 [ 44.804668] usb 1-1: configuration #1 chosen from 1 choice [ 44.807604] hub 1-1:1.0: USB hub found [ 44.810581] hub 1-1:1.0: 3 ports detected [ 44.860457] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000129200002f224] [ 45.131928] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c008100d3c9] [ 45.235593] usb 1-2: new low speed USB device using ohci_hcd and address 6 [ 45.440381] usb 1-2: configuration #1 chosen from 1 choice [ 45.454345] input: A4Tech PS/2+USB Mouse as /class/input/input4 [ 45.454362] input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:02.0-2 [ 45.683812] usb 1-1.1: new full speed USB device using ohci_hcd and address 7 [ 45.806638] usb 1-1.1: configuration #1 chosen from 1 choice [ 45.815634] input: ABBHOME USB Keyboard as /class/input/input5 [ 45.815644] input: USB HID v1.10 Keyboard [ABBHOME USB Keyboard] on usb-0000:00:02.0-1.1 [ 45.822620] input: ABBHOME USB Keyboard as /class/input/input6 [ 45.822637] input: USB HID v1.10 Mouse [ABBHOME USB Keyboard] on usb-0000:00:02.0-1.1 [ 52.960173] e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex [ 53.946520] NET: Registered protocol family 17 [ 54.343444] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c40 [ 54.343473] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c00 [ 54.445007] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 54.447896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 54.572771] gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xb000, speed 1205kHz [ 54.663742] input: PC Speaker as /class/input/input7 [ 55.122146] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 55.122158] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 55.122249] PCI: Setting latency timer of device 0000:01:09.0 to 64 [ 55.287180] fuse init (API version 7.8) [ 55.337401] lp: driver loaded but no devices found [ 55.390404] Adding 1831400k swap on /dev/disk/by-uuid/712cd5a5-4cd7-4a8a-9df1-4464823b02a2. Priority:-1 extents:1 across:1831400k [ 62.522405] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 62.553774] NTFS volume version 3.1. [ 62.578897] NTFS volume version 3.1. [ 67.828990] Using specific hotkey driver [ 67.881247] No dock devices found. [ 67.948432] input: Power Button (FF) as /class/input/input8 [ 67.952145] ACPI: Power Button (FF) [PWRF] [ 67.970410] input: Power Button (CM) as /class/input/input9 [ 67.974098] ACPI: Power Button (CM) [PWRB] [ 68.013947] ibm_acpi: ec object not found [ 68.089827] pcc_acpi: loading... [ 68.251660] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00) [ 68.255959] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [ 74.978942] ppdev: user-space parallel port driver [ 75.777560] Bluetooth: Core ver 2.11 [ 75.777611] NET: Registered protocol family 31 [ 75.777613] Bluetooth: HCI device and connection manager initialized [ 75.777616] Bluetooth: HCI socket layer initialized [ 75.815334] Bluetooth: L2CAP ver 2.8 [ 75.815338] Bluetooth: L2CAP socket layer initialized [ 75.841738] Bluetooth: RFCOMM socket layer initialized [ 75.841754] Bluetooth: RFCOMM TTY layer initialized [ 75.841755] Bluetooth: RFCOMM ver 1.8 [ 86.192001] NET: Registered protocol family 10 [ 86.192090] lo: Disabled Privacy Extensions [ 88.430716] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 88.588957] ISO 9660 Extensions: RRIP_1991A [ 96.284625] eth1: no IPv6 routers present [ 96.292609] eth0: no IPv6 routers present
-- Keyboard refuses to work properly https://bugs.launchpad.net/bugs/94837 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
