I'm also going to copy/paste an answer I posted somewhere else:
Also, as noted on IRC, bond-primary seems to be limited to active-backup only.
For reference: http://www.kernel.org/doc/Documentation/networking/bonding.txt
Here's a minimal 802.3ad config:
----
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# Link Aggregation bonding
auto bond0
iface bond0 inet static
bond-slaves none
bond-mode 802.3ad
bond-miimon 100
address 172.22.15.11
netmask 255.255.255.0
gateway 172.22.15.1
auto eth0
iface eth0 inet manual
bond-master bond0
auto eth1
iface eth1 inet manual
bond-master bond0
----
Please try with a config similar to that one as I'd expect kernel errors when
trying to change options that don't exist in 802.3ad mode.
Looking at "dmesg | grep bond" may also give some clues as to what's wrong.
That's with my proposed ifenslave package, the one in Oneiric and in
former Ubuntu releases is known to have a race condition so at this
point I'm only interested in feedback on the one that's in my PPA as
that's the one I'll push to Precise and use for SRUs.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/889423
Title:
802.3ad bonding not configured correctly
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/889423/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
